The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.01mm (0.005in).Jaws: 60mm.
The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case.The 1965 Traditional External Micrometer has the following specification: Micrometer Range: 0-1in. Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.Resolution: 0.001in.
The Moore & Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered design for easier access to difficult areas. The micrometer has a adjusting key, locking lever and a constant force ratchet for ease of use. The micrometer is manufactured to DIN 863/1 standards. Supplied in plastic case. Specification Range: 0-25mm.Resolution: 0.01mm.
The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.
The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Inside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 3306R Firm Joint Inside Caliper has the following specification: Size: 150mm (6in).
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 33118 Firm Joint Outside Calipers have the following specification: Size: 450mm (18in).
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 33124 Firm Joint Outside Calipers have the following specification: Size: 600mm (24in).
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 3316R Firm Joint Outside Calipers have the following specification: Size: 150mm (6in).
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effective leg length which is measured from the joint assembly. Note: firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 336-6R Firm Joint Jenny Caliper has the following specification: Size: 150mm (6in).
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effective leg length which is measured from the joint assembly. Note: firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 341R Firm Joint Jenny Caliper has the following specification: Size: 125mm (5in).
The Moore & Wright 400 Series Dial Indicator has a satin-chromed body with a tungsten carbide measuring contact and a double dial indicator for measuring mm stroke. The design is shockproof incase of accidently knocks. The scale can be adjusted with the stop screw. The 400 Series Dial Indicator is manufactured to DIN 878 standards. Supplied packed in a foam box. Range: 0-10mm.Resolution: 0.01mm.Dial Diameter: 58mm. Type: Ear Back.
The Moore & Wright 401 Series Dial Indicator has an aluminium body and a tungsten carbide measuring tip. It has an adjustable bezel with stop screw and features tolerance indicators. Manufactured to ANSI B89.1.10 standard. Specifications:Range: 0-0.5in.Resolution: 0.001in.Bezel diameter: 58mm.
The Moore & Wright 420 Series Dial Test Indicators have highly precisioned, fully jewelled bearings and carbide points. There are two dovetail clamps on these models. The 420 Series allow automatic reversal of measuring direction and there is a rotating dial for increased ease of use. Styli Length: 12mm (1/2in).The Moore & Wright MW420-03 Dial Test Indicators has the following specification: Range: 0.8mm.Resoultion: 0.01mm.Dial Reading: 0-40-0.Dial Diameter: 25mm.
The Moore & Wright 420 Series Dial Test Indicators have highly precisioned, fully jewelled bearings and carbide points. There are two dovetail clamps on these models. The 420 Series allow automatic reversal of measuring direction and there is a rotating dial for increased ease of use. Styli Length: 12mm (1/2in).The Moore & Wright MW420-03I Dial Test Indicator has the following specification: Range: 0.030in.Resoultion: 0.0005in.Dial Reading: 0-15-0.Dial Diameter: 1in.
The Moore & Wright Reversible Base Depth Gauges have accurately ground top and bottom faces to allow the base to be reversed perfect for use in confined spaces. There is a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are graduated on both sides.The Moore & Wright 43 Reversible Base Depth Gauge has the following specification: Size of Base: 18/56mm, 0.71/2.21in.Width: 5.5mm/0.22in.Thickness: 1.0mm/0.04in.Length of Blade: 195mm/7.68in. Metric/Imperial Scale Graduations : Front Face: 1/32nd, Rear Face: 1.0mm.
The Moore & Wright Reversible Base Depth Gauges have accurately ground top and bottom faces to allow the base to be reversed perfect for use in confined spaces. There is a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are graduated on both sides.The Moore & Wright 43M Reversible Base Depth Gauge has the following specification: Size of Base: 18/56mm.Width: 5.5mm.Thickness: 1.0mm.Length of Blade: 195mm. Metric Scale Graduations : Front Face: 0.5mm and 1.0mm, Rear Face: 1.0mm.
The Moore & Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. There is a powerful magnetic base that can be turned on and off depending on the user requirements and there is a magnetic force of 80kg/175lbs.
The Moore & Wright MW500-01 Universal 360° Bevel Protractor is made from high quality hardened and ground stainless steel and has a high precision satin chromed scale. It is fitted with a magnifying glass for easy reading with a fine adjustment and height gauge attachment. They have minimum reading time of 5 minutes - this is a visual angle of 5 arc minutes (1 arc min = 1/60 of a degree). Comes with a 300mm (12in) and 150mm (6in) rule and is packed as set in plastic box.
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 503 Spring Dividers have the following specifications: Size: 75mm (3in).
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 506 Spring Dividers have the following specifications: Size: 150mm (6in).
The Moore & Wright Spring Joint Internal Calipers are manufactured from polished tool steel. Their bow spring ensures uniform tension over the working range. The adjustment screw is centrally mounted. These spring joint internal calipers conform to BS3123 standards.The Moore & Wright 514R Spring Joint Internal Caliper has the following specification: Size: 100mm (4in).
The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (Square, Protractor and Centre) that can be attached to the stainless steel ruler, allowing versatile measurements and marking on various types of workpieces. The stainless steel rule has engraved graduations; one side metric, one side imperial and hardened and ground slide ways. Range: 180°.Length: 300mm (12in).
The Moore & Wright Spring Joint External Calipers have a bow spring that ensures uniform tension over the working range. They have a centrally mounted adjustment screw that offers a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards.The Moore & Wright 524R Spring Joint External Calipers have the following specification: Size: 100mm (4in).
The Moore & Wright Spring Joint External Calipers have a bow spring that ensures uniform tension over the working range. They have a centrally mounted adjustment screw that offers a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards.The Moore & Wright 526R Spring Joint External Calipers have the following specification: Size: 150mm (6in).
The Moore & Wright 890 Series Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. These fixed type depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in.The Moore & Wright 890M Fix Type Depth Micrometer has the following specification: Range: 0-25mm.Resolution: 0.01mm.
The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the following fixed angles: 15°, 30°, 45°, 60°, 75° and 90°. Centre Head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter. MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSM300 Precision Combination Set is a full set including 300mm rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: mm and 0.5mm on both sides; numbered every 10mm.
The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the following fixed angles: 15°, 30°, 45°, 60°, 75° and 90°. Centre Head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter. MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: Metric graduations: in 0.5mm, numbered every 10mm. Imperial graduations: 32nds and 64ths numbered every 1/8in.
The Moore & Wright CSM Precision Rules are fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life. Theseare rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSRME24 is a 600mm/24in rule is perfect for use with the combination sets and is graduated on both sides. Measurements: Metric Graduations: in 0.5mm, numbered every 10mm. Imperial Graduations: 32nds and 64ths numbered every 1/8in. PLEASE NOTE This is ONLY the Rule.
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).
Box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. These tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size range: 8-22 mm. Set of 8 Consisting of 1 each of 8 x 9 mm x 3.1/4in Long (82mm) Double ended10 mm x 2in Long (50mm) Single ended11 mm x 2in Long (50mm) Single ended12 x 13 mm x 3.1/4in Long (82mm) Double ended14 x 15 mm x 3.1/4in Long (82mm) Double ended17 x 19 mm x 3.1/4in Long (82mm) Double ended21 x 22 mm x 3.1/4in Long (82mm) Double ended14 mm Spark Plug Spanner
