These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers. With 6 functions: -Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. -Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes. -Stripping holes for conductors of 0.75 - 1.5mm² and 2.5mm² -Crimp die for wire-end ferrules 0.5 - 2.5mm² -Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm² / dia. 15mm -Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected1 x Knipex VDE Multifunctional Installation Pliers 200mm
These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers. With 6 functions: -Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. -Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes. -Stripping holes for conductors of 0.75 - 1.5mm² and 2.5mm² -Crimp die for wire-end ferrules 0.5 - 2.5mm² -Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm² / dia. 15mm -Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protectedThese Knipex VDE Multifunctional Installation Pliers have an opening spring integrated in to the joint. The activated locking lever keeps the cutting edges closed while other functions remain active. The intelligent latching mechanism enables you to 'grip' without opening the pliers. The cutting edge remains closed and protected.
The Knipex 14 26 Series VDE Side Cutters/Wire Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from top quality Vanadium electric special tool steel and have been forged and oil hardened. Chrome plated finish. They have flat round jaws for gripping surfaces and, with the serrated edge, will give a better grip on the workpiece. The cutting edges will give the user a good clean cut. These Knipex pliers have precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm² and are suitable for gripping and cutting work in precision mechanics. The heavy-duty induction hardened precision blades are ideal for soft wire up to 4.0mm diameter and are hardened to approximately 60 HRC. The cutting edges are suitable for cutting medium hard wire with a diameter of up to 4.0mm and single (solid) conductors of 1.5 and 2.5 mm² with ease. Specification Cutting Capacity: Medium: 1.5mm, Soft: 2.5mmStripping Capacities: 1.5 + 2.5mm².AWG: 15+13Length: 160mm
The Knipex Electrician's Folding Knife has a high-quality, extremely sharp, stainless steel blade and a handle made from robust, shock-resistant plastic. Its ergonomic handle provides a comfortable grip and easy guidance. It is easy to open thanks to the practical diamond shaped grip on the blade. There is a useful tether attachment at the end of the handle. Specification: Blade Length: 80mmOverall Length: 120mmWeight: 85g
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1630135 are ideal for stripping, dismantling round PVC, rubber, silicone, PTFE cables from 6.0 - 29.0mm dia. There is a self-cocking holding lever to hold cable securley and a knurled nut for cutting depth adjustment. The Knipex KPX1630135 can be changed from circular to longitudinal cutting, simply by turning the tool body, and spiral cutting for longer stripping areas. knipex have made the body of the tool from shock-resistant plastic for added safety and the blade is changeable. Stripping capacities Ø 1/4 - 1 5/32 inchesLength 5 5/16 inchesWeight 4.2 ounces
The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm². It offers simplified insertion of single wires for stripping using location ridges, easy insertion of coax and data cable thanks to spring opening aid. Its multi-component design with a soft plastic zone allows for comfortable use and a secure grip. The housing is made from stable glass fibre reinforced plastic. Specification: Wire Stripping Capacity:- Round Cable: 8-13mmConductors & Stands: 0.2-4.0mmData Cable: CAT 5-7, Twisted Pair (UTP/STP)Coax Cable: 4.8-7.5mmOverall Length: 135mmWeight: 95g1 x Knipex ErgoStrip® Universal Stripping Tool - Right Handed
The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm². It offers simplified insertion of single wires for stripping using location ridges, easy insertion of coax and data cable thanks to spring opening aid. Its multi-component design with a soft plastic zone allows for comfortable use and a secure grip. The housing is made from stable glass fibre reinforced plastic. Specification: Wire Stripping Capacity:- Round Cable: 8-13mmConductors & Stands: 0.2-4.0mmData Cable: CAT 5-7, Twisted Pair (UTP/STP)Coax Cable: 4.8-7.5mmOverall Length: 135mmWeight: 95g1 x Knipex ErgoStrip® Universal Stripping Tool - Left Handed
The Knipex 25 Series Snipe Nose Side Cutting Pliers (radio pliers) are suitable for finer gripping and cutting work. They have pointed half-round jaws, knurled gripping surfaces and cutting edges, 61 HRC. Made from forged chrome vanadium electric steel, then oil-hardened. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 1.6mm, Medium: 2.5mm.These Knipex Snipe Nose Side Cutting Pliers (Radio) are fitted with PVC grips.
The Knipex 25 Series Snipe Nose Side Cutting Pliers (radio pliers) are suitable for finer gripping and cutting work. They have pointed half-round jaws, knurled gripping surfaces and cutting edges, 61 HRC. Made from forged chrome vanadium electric steel, then oil-hardened. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 1.6mm, Medium: 2.5mm.These Knipex Snipe Nose Side Cutting Pliers (Radio) are fitted with multi-component grips.
These Knipex 25 06 Series Snipe Nose Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. Half-round, long, tapered jaws with knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. They are suitable for finer gripping and cutting work. Also known as a radio pliers. Specification Cutting Capacity: Hard Wire : 1.6mm, Medium Wire: 2.5mm
These Knipex 26 Series Snipe Nose Side Cutters (Stork Beak) have long flat round jaws. Highly loadable, elastic precision points with blades. Cutting edges separately induction hardened. Made from special tool steel, oil-hardened. 61HRC. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 2.2mm, Medium: 3.2mm.These Knipex Long Snipe Nose Side Cutting Pliers are fitted with PVC grips.
These Knipex 26 Series Snipe Nose Side Cutters (Stork Beak) have long flat round jaws. Highly loadable, elastic precision points with blades. Cutting edges separately induction hardened. Made from special tool steel, oil-hardened. 61HRC. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 2.2mm, Medium: 3.2mm.These Knipex Snipe Nose Side Cutting Pliers (Stork Beak) are fitted with multi-component grips.
The Knipex 26 16 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical instillation applications. Specification Cutting Capacity: Hard Wire: 2.2mm, Medium Wire: 3.2mmLength: 200mm
The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.
These Knipex 26 26 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. The jaws are angled at 40° with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicle applications. Specification Cutting Capacity: Hard Wire: 2.2mm, Medium Wire: 3.2mmLength: 200mm
These Knipex 28 01 Series Assembly Pliers are made from special tool steel and have PVC dipped handles for added comfort, durability and, most importantly, added grip. The oil hardened and tempered construction will give these pliers a longer working life. They ;have separately induction hardened cutting edges that are hardened to approximately 60HRc. ; These pliers are specially suitable for gripping and assembly work with a higher prehensile power. They are equipped with hardened cutting edges with serrated gripping surfaces for hard or soft wire cutting.
The Knipex Straight Long Reach Needle Nose Pliers are forged from special tool steel that has been oil-hardened and tempered. They are ideal for gripping, adjustment and assembly work in hard to reach areas thanks to slim half round tips and long handles. They provide careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. With a serrated pipe grip enabling them to securely grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering.
The Knipex Bent Long Reach Needle Nose Pliers are forged from special tool steel that has been oil-hardened and tempered. They are ideal for gripping, adjustment and assembly work in hard to reach areas thanks to slim half round tips and long handles. They provide careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. With a serrated pipe grip enabling them to securely grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering.
These Knipex 35 22 precision electronics half round jaw pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish, together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Length: 115mm.
These Knipex 38 11 Mechanics Long Nose Pliers with straight, flat-round jaws and a polished head. Made from special tool steel that has been oil hardened to give these pliers a longer working life. ;Fitted with ;PVC dipped handles for added comfort, durability and, most importantly, added grip. The gripping surfaces cross-hatched and knurled. The cutting edges are separately induction hardened for durability and longer working life and are hardened to approx 61HRc. The pliers ;can withstand high load capacity against torsion with high bending strength of the plier jaw/tips to withstand pulling and twisting. They are specially designed for the automotive industry as they have a long reach and will access tight or restricted areas.
These Knipex Mechanics Bent Nose Pliers are manufactured from forged Vanadium Electric Steel that has been oil-hardened. They have a 70° angled head that offers easy access to confined areas, whilst the precision, high strength half round jaws feature cross hatched knurled surfaces for ultimate gripping. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for pulling split pins and other gripping tasks in difficult to access areas.
These Knipex Half Round Mechanics Pliers are manufactured from forged Vanadium Electric Steel that has been oil-hardened. They have 45° angled, half-round, long jaws and a spark plug cover 'grabber'. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for gripping spark plugs and round components.
The Knipex 41 04 Series Universal Grip Pliers hold section and flat material securely. The Plier body is made from high strength spring steel, and inserted jaws are made of chrome vanadium steel, drop forged. Heavy-duty model with wire cutter. High clamping strength by elbow lever action. With adjustment screw and release lever, single hand operation. Length: 254mm (10in).Capacity: Hex: 30mm, Square: 20mm, Round: 40mm.
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length: 140mm (5.½ inches).Bore size: 8mm - 13mm.
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 140mm (5.1/2 inches).Bore size: 12 - 25 mm.
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 180mm (7 in).Bore size: 19 - 60 mm.
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 225mm (9 in).Bore size: 40 - 100 mm.
The Knipex 44 21 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. 44 21 J11: Bore Size: 12 - 25mm.44 21 J21: Bore Size: 19 - 60mm.44 21 J31: Bore Size: 40 - 100mm.Length 130mm (5 1/4 in).Size of bore 12-25 mm.
The Knipex 44 21 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. 44 21 J11: Bore Size: 12 - 25mm.44 21 J21: Bore Size: 19 - 60mm.44 21 J31: Bore Size: 40 - 100mm.Length 170mm ( 6 3/4 in).Size of bore 19-60 mm.
The Knipex 44 21 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. 44 21 J11: Bore Size: 12 - 25mm.44 21 J21: Bore Size: 19 - 60mm.44 21 J31: Bore Size: 40 - 100mm.Length 215mm (8 1/2 in).Size of bore 40-100 mm.
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 140mm.Bore 8-13mm.
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 140mmBore size 12-25mm
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 180mmBore size 19-60mm
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 225mmBore size 40-100mm
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 310mmBore size 85-140mm
The Knipex 46 11 series of external straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. With opening spring. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Shaft size: 3mm - 10mm
