The Hultafors TB600 Bricklayer's Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.
An impact-resistant ABS plastic level that will withstand temperatures between -15° C and +60° C. It has impact resistant tubular vials vials with extremely high transparency and durability. Sensitivity of 13 mm/m and a tolerance in normal position of ± 1.5 mm/m. The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.
Small, neat line level made of impact-resistant plastic with a vial and hooks at both ends. Hang the level on a tensioned string so that you can check the incline between two points. Made from ABS plastic which makes the level both light and durable. The tube vial is made of Plexiglas while the vial fluid is a low viscosity, oil mixture that gives the bubble the best possible conditions for movement.
Square with aluminium stock and millimetre scale along the top and bottom edge of the blade. Stainless steel blade measuring 20 cm x 1.5 mm x 45 mm with the scale being deep-etched and extremely hard-wearing. The stock is made of anodised aluminium with an 18 mm wide milled working surface.
This Hultafors Plumbers Knife has a built-in file for filing off burrs. The knife blade is made from 2.5 mm Japanese knife stainless steel that has been hardened to 57-59 HRC and the edges have been sharpened in several stages with a final honing on a leather strop. The handle and sheath are manufactured of extra impact resistant PP plastic. A unique method for attaching the sheath around a button on work clothes means it does not loosen, but is easy to remove. Blade length: 93 mm.Overall length: 208 mm.Supplied loose.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These INDCB8 aluminium oxide stones have the same grit throughout.Type.CB8Size.8 x 2 x 1 in.Grade.Coarse.
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These FB24 alumimium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2in.Grade: Fine.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These iINDFB8 aluminium oxide stones have the same grit throughout.Size.8 x 2 x 1 in.Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF14.Size. 100 x 6mm (4 X 1/4 in)Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Fine.
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. FS14.Size. 100 x 25 x 11 x 5mm (4 X 1x 7/16 x 3/16 in).Grade.Fine. With 1 round edge.
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. FS44.Size. 115 x 45 x 13 x 5mm (4 1/2 x 1 3/4 x 1/2 x 3/16 in)Grade. Fine. With 1 round edge.
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.Combination stones INDIB24 are made with one face coarse or medium, and one face of fine cut.Size: 4 x 1 x .1/2in.Grade: Fine/Coarse.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Provide a keen lasting edge. These stones may be used dry or with oil. The IB6 combination stone has one coarse and one fine face.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.Combination stones INDIB8 are made with one face coarse and one face of fine cut.Size. 204mm x 50mm x 25mm Fine/Coarse.
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These INDMB24 aluminium oxide bench stones have the same grit throughout. Size: 4 x 1 x 1/2 in.Grade: Fine.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These INDMB8 aluminium oxide bench stones have the same grit throughout, medium for sharpening dull tools Size.8 x 2 x 1 in.Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF114.Size. 100 x 6mm (4 X 1/4 in).Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. MF14.Size.100 x 6mm (4 x 1/4 in).Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. MF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Medium.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Half Round.Type. MF344.Size.4 X 1/2 in.Grade. Medium.
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. MS24.Size. 115 x 45 x 6 x 1.5mm (4 1/2 x 1 /3/4 x 1/4 x 1/16 in)Grade. Medium. With 1 round edge.
The Stanley Intelli Level Moisture Meter gives a % moisture reading based on electrical resistance across two pins. LCD screen with dual measurement bar graph. Measures moisture in wood: 6-44%, and other building materials: 0.2-2%. Powered by 3 x Cell Batteries (supplied).
The Stanley Intelli Tools AC/DC Digital Multimeter measures voltage, amperage and resistance. Its LCD Screen displays large numbers so they're easy to read and has a durable over moulded housing provides increased shock resistance and comfortable handling. The integrated unit stand provides a stable base for hand free use of the unit. Powered by a 9 volt battery which is supplied.
The Stanley Intelli Tools Digital Infrared Thermometer is accurate to within 3° with a wavelength between 630-660nm and a temperature range of -38°C to +520°C. This large range allows users to effectively complete their desired tasks. With a high contrast, back lit display for visibility in all light conditions and an IP20 casing that provides protection against dust, increasing its working life. Features thermal leak detection, from a reference temperature (green screen). Scanning an area will show a red screen for high temperature and blue screen for low temperature. Its 8:1 spot ratio allows for users to measure a 32cm circle from 2.5m distance. Emissivity 0,95, covers all thermal radiation emission of most materials. Powered by 2 x AA batteries which are supplied.
The Stanley Intelli Tools FatMax® Smart Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. The Smart Function automatically detects the correct measurement. A 'Hold' function allows you to hold a value for a few seconds. It has a 3.5in LCD display with a dual display option, allowing you to keep 2 values on the screen at the same time. Encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 10M ohmFrequency: 3 kHzContinuity: <40 ohm
The Stanley Intelli Tools FatMax® Smart Clamp Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. AC current is measured through the clamp, any other measurements are done through cables like a normal digital multimeter. The Smart Function automatically detects the correct measurement. A 'Hold' function allows you to hold a value for a few seconds. It has a 3.5in LCD display with a dual display option, allowing you to keep 2 values on the screen at the same time. Encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 10M ohmFrequency: 3 kHzContinuity: <40 ohm
The Stanley Intelli Tools FatMax® LED Voltage Tester uses an LED display to show the measured value immediately, polarity is also indicated. The durable body is IP54 rated, meaning it is resistant to debris/water. Specification: Voltage: AC/DC 400V
The Stanley Intelli Tools FatMax® Non-Contact Voltage Detector can be used to detect voltage or non-contact metals up to 20mm. Allows you to check voltage in a circuit without contact. The integrated sensitivity adjustment allows you to narrow down the search area of live voltage. Specification: AC Voltage Range: 20-1000VMetal Detecting Distance: <20mmSafety Rating: CAT III 600V & CAT II 1000V
The Stanley TLM165SI FatMax® Laser Measurer provides distance, area and volume calculations. It also provides indirect height measurements via Pythagoras calculation. Measurements can be taken from the front, back, tripod mount or end toe of the product. Fitted with a toe piece that allows measurement from the corner of the room. With integrated Bluetooth® connectivity, enabling you to sync any data to your smart phone. Quickly capture measurements and create custom floor plans by connecting to the STANLEY® Smart Connect™ App (download separately). Easy to operate thanks to the large colour touch screen. Other features include: addition/subtraction calculator, automatic sleep mode and a memory function. The tough and durable body is rated to IP54 to protect against dust and water spray. Fitted with a 1/4in thread for tripod mounting. Runs on 3 x AAA batteries (supplied). Specification: Accuracy: ±1.5mmOperating Range: 0.1-60mPower Supply: 3 x AAA Batteries (supplied)Automatic Off: 90/180 SecondsWeight: 100g
