The Faithfull Mini Saw heavier version of the junior hacksaw with an epoxy coated steel frame and moulded pistol-grip handle which incorporates the blade tensioning nut, supplied with a hardened and tempered blade which is ideal for small cutting jobs in metal and wood. Blade Length 150mm (6in).Replacement blades. (FAIJHB or FAIJHBS).
The Faithfull Prestige Mitre Saw Protractor is a modern and accurate way to measure internal and external wall angles. This measurement is commonly used to transfer angles to mitre saws but could also be used as a datum point for hand cutting. Manufactured using CNC machining from heavy-duty aluminium. It is then black anodised for protection and laser etched for accuracy.
Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 127mm (5in)
The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.
Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)
This Faithfull Mains Tester Screwdriver is fitted with a neon indicator in the clear plastic handle which illuminates when the point of the tester is touched on a live voltage source. This mains tester is suitable for testing AC voltages from 125 to 250 volts against earth. The tip of the tester should be placed on the suspected live source, while finger touch contact is applied to the metal stud on the top of the handle. If the circuit or terminal contact point at the tip of the tester is live, the bulb will then light up as confirmation. Note: ALWAYS test the mains tester on a known live source before use, to determine that its indicator bulb is functioning correctly prior to use. WARNING: The earthing position of the user largely determines whether the tester bulb will illuminate or not. Failure to illuminate therefore does not provide 100% confirmation that no voltage is present.Size: 140 x 2.9mm.
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 10mm (3/8 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 2mm (5/64 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 3mm (1/8 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 5mm (3/16 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 6mm (1/4 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 8mm (5/16 in).
The Faithfull nail puller is the perfect tool for removing nails from most materials, lifting floorboards, opening wooden crates and dismantling wooden structures. This specialist tool can even extract nail heads recessed below surface level and features a malleable cast iron slide handle with a hinged, drop-forged gripping jaw fixed to a box joint for extra strength. The tool is used by positioning the jaws on either side of the nail head before slamming down the slide handle to drive the jaws into the timber and under the nail head. The handle is then levered forwards using the base heel as a leverage point to keep the jaws tight whilst extracting the nail. 60cm - 24-Inch
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 32mm (1.1/4in)
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 32mm
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 38mm (1.1/2in)
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 38mm
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 1.5mm (1/16in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 3mm (1/8in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 5mm (3/16in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 2.5mm (3/32in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
The Faithfull Nutspinners have a machined hexagonal socket and shaft with a corrosion resistant finish. Fitted with full size soft grip, non-slip handles for user comfort.Size: 9mm.
All-steel curved claw hammer highly polished of a one-piece construction.The narrow shaft helps weight distribution and balance. Fitted with a moulded vinyl grip that is bonded to the hammer shaft for cushioning and user comfort.Manufactured in accordance to BS876.Weight: 570g (1 1/4 lb)
Designed specially for use by carpenters and joiners. Combination oilstones are made from aluminium oxide. This is for use with oil when sharpening chisels and plane irons. Size: 100 x 25 x 12.5mm (4 x 1 x 1/2in)Grade: Fine / Coarse.
Combination oilstone made from aluminium oxide with one medium face and one coarse face. Can be used either dry or with a light oil. Size: 200 x 50 x 25mm (8 x 2 x 1in) Grade: Medium / Coarse
Faithfull 200mm oilstone complete with oil and honing guide. This makes the ideal kit for sharpening all HSS and carbon steel chisels and plane blades. The honing guide makes it easy to restore a perfect cutting edge, even for newcomers to the task.
The Faithfull open socket Irish shovel pressed from high-quality steel and fitted with a graded wooden shaft. Blade: 340 x 250mm (14 x 9in).Shaft: 1370mm (54in).
The Faithfull round mouth No 2 shovel pressed from high-quality manganese steel and fitted with an FSC European Ash shaft 700mm (28in) and T hilt. Socket polished for comfort in use. Size: No.2.Blade: 300 x 240mm (12 x 9.1/2in).Shaft: 700mm (28in).
The Faithfull open socket No.2 shovel which is fitted with a 1.4m (54in) long weatherproofed straight FSC European Ash handle. Specification: Size: No.2Blade: 300 x 220mm (12 in x 10in)Shaft: 1.4m (54in)
Square mouthed open socket shovel pressed from high quality steel and fitted with a 700mm (28in) graded wooden shaft with a metal YD hilt. The socket is polished for comfort in use. Weatherproofed handle.Size No 2Blade size 300 x 250mm (12 x 10 in).Shaft: 700mm (28in).
Faithfull Square mouthed open socket shovel pressed from high-quality manganese steel and fitted with a 700mm (28in) FSC European Ash shaft fitted with a T hilt. The socket is polished for comfort in use. Weatherproofed handle.Shaft: 700mm (28in).Size No 2Blade: 300 x 250mm (12 x 10in)
The Faithfull professional grade aluminium plasterers hawk with a cast aluminium strengthening back plate, foam rubber callous protector and a soft grip handle for user comfort. Size: 12in/300mm Square.
The Faithfull Pavers Maul Head has a cylindrical shape and is made from high-grade rubber. Ideal for laying and levelling paving slabs and kerbing. Fits FAIAM42 Ash Maul Handle.
Faithfull plastic brick hod which is virtually unbreakable made from polyethylene which is extremely hardwearing. Reinforced ribbed sides and socket for replaceable handle (sold separately). Size: 420 x 220 x 220mm (17 x 9 x 9in). Handles suitable: HWHH (1070mm/42in), HWHH48 (1220mm/48in).
The Faithfull PBM1522 is the ideal tool for the Plumber, Gas Fitter and Domestic Heating Engineer. It is capable of handling and bending 15 - 22mm O/D Copper Tube. Hand held it can be used in restricted spaces. Compact in design and easy to carry it can also be held in a vice for occasional use as a bench bender. Leading arm has pre-set rollers for speed of operation. Size. 15 and 22mm O/D Copper.
