The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M6Thread: 1.0
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M8Thread: 1.25
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M10Thread: 1.5Drill Size: 8.7mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M12Thread: 1.75Drill Size: 10.5mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M3Thread: 0.5Drill Size: 2.5mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M4Thread: 0.7Drill Size: 3.4mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M5Thread: 0.8Drill Size: 4.3mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M6Thread: 1.0Drill Size: 5.2mm
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.Size: M8Thread: 1.25Drill Size: 6.9mm
Supplied in kits, these Faithfull Hammer Wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Each kit includes two malleable steel hammer wedges and one wooden wedge. When fitted correctly they provide a secure and safe attachment of a striking head to a wooden handle. Please note: Hammer wedges are NOT suitable for use with fibreglass replacement handles.The FAIHW5N Kit consists of: 2 Steel wedges: 18 mm width (size 3). 1 Wooden wedge : 62 x 65 mm. Suitable for axe heads of all weights.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 150mm (6in) files.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 200mm (8in) files.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 250mm (10in) files.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 300-350mm (12-14in) files.
These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools.Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle.Kit consists of2 Steel Wedges : 12mm Width (Size 1)1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb2 Steel Wedges : 15mm Width (size 2)1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs2 Steel Wedges : 18mm width (size 3)1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4)1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbsNote Hammer wedges are NOT suitable for use with fibreglass replacement handles.
The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.
The Faithfull Box Type Immersion Heater Spanner provides a firm non-slip grip on immersion heater elements. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied complete with a tommy bar to help provide added leverage when removing over tight elements. Manufactured from high-quality steel.
The Faithfull Cranked Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. The cranked head allows access to heaters that are surrounded by insulation or recessed. Manufactured from high-quality steel.
The Faithfull Insulated Crow Bar is fully insulated and made to BS8020 standards. With a pencil point at one end and a flat chisel edge at the other. The insulated shaft is manufactured using a solid fibreglass core which is coated with an abrasive resistant orange polymer coating. These insulated tools conform to BS8020:2002 for working on or near live cables. They are individually tested to 10,000 volts, and guaranteed to 1,000 volts.
Faithfull forged steel heavy-duty insulated drainage shovel for working on or near live cable. Featuring a solid forged steel head and a ‘YD’ handle. The insulated shaft has a solid fibreglass core and an abrasive resistant orange polymer coating. • ALL NOW WITH NEW IMPROVED WIDER HANDLE GRIPS• INDIVIDUALLY TESTED TO 10,000 VOLTS, AND GUARANTEED TO 1,000 VOLTS• CONFORMS TO: BS8020:2002• INTEGRATED SAFETY HAND STOP
Faithfull forged steel heavy-duty insulated taper mouth shovel for working on or near live cable. Featuring a solid forged steel head and a ‘YD’ handle. The insulated shaft has a solid fibreglass core and an abrasive resistant orange polymer coating. • ALL NOW WITH NEW IMPROVED WIDER HANDLE GRIPS• INDIVIDUALLY TESTED TO 10,000 VOLTS, AND GUARANTEED TO 1,000 VOLTS• CONFORMS TO: BS8020:2002• INTEGRATED SAFETY HAND STOP
The Faithfull saw is designed specifically for cutting dry wall panels and plasterboard. The sharp pointed tip is used to jab into the material and start the cutting process. A sturdy sheath protects the blade when not in use. Specification: Blade Length: 150mm (6in)TPI: 7
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).Junior Blades, virtually unbreakable in normal use.Providing an efficient way to cut metal. Packed 10 in a sleeve and 10 sleeves to a box.
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).Junior Hacksaw Blades, virtually unbreakable in normal use.Providing an efficient way to cut metal. Pack of 10 blades. 32tpi.
The Faithfull hacking knife features a heavy steel cutting blade with a broad back for striking applications. Can be struck with a hammer to remove old putty from window frames. It features a 2-part handle with a 3 rivet fixing.
The Faithfull Hooked blade knife ideal for making precise incisions into lino and other similar materials. The shaped beechwood handle has 3-rivets which hold it securely to the blade. Made in Sheffield, England. Blade length: 75mm (3in)
Shoe knives are generally used for cutting leather but can be used for many other tasks. The flexible stainless steel blade is riveted to a beechwood handle. Blade Length: 112mm (4.3/8in).
Shoe knives are generally used for cutting leather but can be used for many other tasks. The flexible stainless steel blade is riveted to a hardwood handle. Blade Length: 112mm (4.3/8in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 10mm (3/8 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 2mm (5/64 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 3mm (1/8 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 4mm (5/32 in).
The Faithfull robust L shaped plastic blocks are a simple tool which can be quickly adjusted under tension for length and height to ensure that courses of bricks are running straight and true. They feature built-in line storage and are supplied with 18 metres of orange polyethylene brick line.
