End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.Length: 200mm (8 in).Cutting capacity: 2.5 mm piano wire.
End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.Length: 160mm (6 1/4 in).Cutting capacity: 2.0mm piano wire.
These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 51-30 Peg Tooth Hard Point Bowsaw Blade 755mm (30in)
These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 51-24 Peg Tooth Hard Point Bowsaw Blade 600mm (24in)
These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 51-21 Peg Tooth Hard Point Bowsaw Blade 530mm (21in)
These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 51-12 Peg Tooth Hard Point Bowsaw Blade 300mm (12in)
A Bahco Handle for Shaped Files that features a two component ERGO™ design. The end covers the tang and shoulder of the file for safety and comfort. Suits Series 1-190 150-170mm (6-7in) & Series 1-170 200-250mm (8-10in).
A Bahco Handle for Flat and Half-Round Files that features a two component ERGO™ design. The end covers the tang and shoulder of the file for safety and comfort.
Bahco File Set 5 Piece, Engineer's 10in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 1-210-10-1-2 half-round bastard file.1 x 1-230-10-1-2 round bastard file.1 x 1-100-10-1-2 hand bastard file.1 x 1-100-10-2-2 hand second cut file. 1 x 1-160-10-1-2 square bastard file. Supplied in a plastic roll wrap.
Bahco File Set 5 Piece, Engineers 8in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 1-210-08-1-2 half-round bastard cut file.1 x 1-230-08-1-2 round bastard cut file.1 x 1-100-08-1-2 hand bastard cut file.1 x 1-100-08-2-2 hand second cut file.1 x 1-160-08-1-2 square bastard file. Supplied in a plastic roll wrap.
Bahco File Set 5 Piece, Engineer's 8in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 100-08-02 flat second cut file.1 x 170-08-02 triangular second cut file.1 x 210-08-02 half-round second cut file.1 x 230-08-02 round second cut file. 1 x 343-08-02 half-round rasp. Supplied in a plastic roll wrap.
This Bahco ERGO™ File Set is perfect for fine filing and polishing jobs. The handle has been developed according to the scientific ERGO™ process. Supplied in a snap-shut plastic wallet with hanging hole. Contains one of each handled file: hand, warding, square, three-square, half-round and round. Specification Type of Cut: 3 SmoothBlade Length: 100mm
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge. 0.6 mm /23g.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
Set of 12 needle files in snapshut plastic wallet with hanging hole. One of each of the following : Hand, flat, half round, round, three square, square, crossing, knife, barrette, slitting, round edge joint and marking files, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (12).
Set of 6 needle files in snapshut plastic wallet with hanging hole. 1 of each of the following :Hand, flat, half round, round, three square and square, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (6).
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).The Bahco 466-400 Box Level has an anodised finished aluminium level with shock absorbing end caps and large vials thats provide ease of use. It offers permanent precision of ± 0.5 mm per metre. Machined surfaces and 'V' groove base, and a thick shaped profile. It also has laser marked measuring scale (for indication purposes only). Length: 400mm.Weight: 520g.
The Bahco 466-250 Scaffolders Level has a solid anodised aluminium body with one vertical and one horizontal vial. Its open frame design, makes it easier to handle. With 45° and 30° angles preset for quick angle setting. It has a rare earth magnetic material base and machined surfaces. Offers high precision, ± 0.5 mm per metre accuracy.
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 2000mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 1800mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 1200mm
Bahco Bolt Cutters are forged from precision high-grade steel and have no protruding parts to get damaged or deformed. They are anti-corrosion treated and have a black finish. The bolt cutters have jaws that can be easily adjusted via a simple patented system. They provide high cutting power, even at the start of the cut. They allow good accessibilty in confined spaces and have comfortable handles.The Bahco 4559-36 Bolt Cutters have the following specifications: Length: 900mm (36in)Max. cutting capacity: 15mm.Weight: 5.98kg.
