The Knipex 4 Piece 00 20 15 VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slipguard prevents any spark over from non-insulated head to the hand. The heads are chrome plated for durability. Supplied in a high-quality, shock resistant plastic case. Contains the following: 1 x 03 06 180 VDE Combination Plier 180mm; made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Cutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm 1 x 26 16 200 VDE Snipe Nose Cutting Plier 200mm; made from vanadium electric steel, forged, multi stage oil-hardened. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical instillation applications. Cutting Capacity: Hard: 2.2mm, Medium: 3.2mm 1 x 70 06 160 VDE Diagonal Cutter 160mm; with a narrow head style for use in confined areas. Forged, vanadium electric steel, multi stage oil-hardened. Precision cutting edges for soft and hard wire, additionally induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. Cutting Capacity: Hard: 2.0mm, Medium: 2.8mm, Soft: 4.0mm 1 x 11 06 160 VDE Insulation Strippers 160mm; made from special tool steel, forged, oil-hardened. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation.
The Knipex 74 01 range of High leverage diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 20% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 01 series come in 160, 180, 200 and 250mm versions with PVC dipped handles for added comfort and a better grip. The 74 01 series are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most the Knipex range of nippers and cutters the 74 01 range are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc.Length 250mm (10 in).
The Knipex 71 Series CoBolt® Compact Bolt Cutters have a lever action mechanism which guarantees an extremely favourable lever ratio with low friction, and cutting performance is 20 times higher than the hand force applied (requires 60 % less effort). CoBolt® compact bolt cutters are ideal for piano wire or for soft solid wire, bolts, nails, rivets and screws. Induction-hardened and with precision cutting edges. Edge hardness approximately 64HRc for added strength and durability, they have exceptional cutting performance with minimal physical effort because of the lever action.This Knipex CoBolt® Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Opening spring and locking device are integrated in the handles also for comfortable work and protected transport. It has the following specification: Length: 200mm.Cutting Capacity (mm): Soft Wire: 6, Medium-Hard Wire: 5.2, Hard Wire 4, Piano Wire: 3.6.
This Knipex Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Contains: 1 x 44 11 J1 Internal Circlip Pliers for bore holes Ø 12-25mm. 1 x 44 11 J2 Internal Circlip Pliers for bore holes Ø 19-60mm. 1 x 46 11 A1 External Circlip Pliers for shafts Ø 10-25mm. 1 x 46 11 A2 External Circlip Pliers for shafts Ø 19-60mm.
The Faithfull contractors fork made from carbon manganese steel for strength and epoxy coated for rust protection. A tubular shaft is welded to the socket for a strong smooth join and the solid forged square prongs are correctly tempered for strength. The shaft is fitted with metal YD hilt with a wooden cross dowel for added comfort. Shaft Size. 700mm (28 in).
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX975110 are a professional tool for cutting and stripping unshielded ribbon, telephone cables and for crimping 6 and 8 pole western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width). Exact crimping process due to parallel crimping and repetitive, high crimping quality due to integral lock. There is a built in Stripping device for round cables. The KPX975110 are fitted with cushion grip handles for added grip and user comfort. Capacity RJ 11/12 (6-poles) 9.65 mm and RJ 45 (8-poles) 11.68 mmLength 7 15/32-inches Weight 12 ounces
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Supplied with a tapping drill.Kit 1/4 UNC X 20 tpiLength 1 1/2 x Diameter
The Faithfull Carpenter's Pencil Retractable Holder keeps your pencil safe and close at hand. Let go of the pencil and the automatically retracting 850mm cord will pull the pencil back to its safe and ready-to-use home position. The belt clip can easily be attached to a belt, shirt collar or pocket.
The Faithfull 46 Piece 1/4in Square Drive Socket Set includes a selection of chrome vanadium hexagonal sockets and popular accessories, and features a 72 tooth, smooth action, soft grip ratchet handle with a quick-release mechanism. The sockets are made from chrome vanadium steel with curved sidewalls to apply torque to the flats, preventing the rounding of the head of the fastener. Manufactured to DIN 3124 Standard and the ratchet handle to DIN 3122. Presented in a sturdy storage case. Contains: 13 x Metric Hexagon Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm. 3 x 25mm Phillips Bit Sockets: PH1, PH2 and PH3.3 x 25mm Pozidriv Bit Sockets: PZ1, PZ2 and PZ3.3 x 25mm Slotted Bit Sockets: SL4, SL5.5 and SL7.6 x 25mm Hex Bit Sockets: H3, H4, H5, H6, H7 and H8.6 x 25mm Star Bit Sockets: TX10, TX15, TX20, TX25, TX30 and TX40. 4 x Hex Key Wrenches: 1.27, 1.5, 2 and 2.5mm. 1 x Hex Adaptor 30mm.2 x Extension Bars: 50 and 150mm.1 x Flexible Extension Bar 150mm.1 x Universal Joint.1 x Sliding T-Bar 115mm.1 x Screwdriver Handle.1 x Soft Grip, Quick-Release, 72 Tooth Ratchet Handle.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.This STANLEY CONTROL-LOCK Pocket Tape, with metric graduations only, has double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 10 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. (Metric graduations only.) Specifications: Blade Length: 10m.Blade Width: 25mm.Accuracy: EC Class II.
The Stanley Dynagrip Ratcheting Wrench with self ratcheting action, for faster tightening of fasteners. No need to remove from fastener while tightening or loosening. Its cushion Jaw prevents damage to fastener in use. Easy to engage all sizes of fastening within size range. Capacity: 17-24mm.Length: 265mm.
The Stanley Tools FatMax® Flared Tip Bolster Screwdrivers are colour coded and feature icon ID for quick recognition of tip pattern and size. They have a chrome vanadium steel bar that resists bending and snapping. The tips have been hardened for durability and precision machined for excellent head to fastener fit. They are fitted with a tri material handle, the inner core is moulded directly to the blade tang and then a polyprop outer with a TPR overlay for grip and comfort. This large diameter handle provides excellent torque transmission and grip. The design also features a tapered waist for fast low torque tightening. These screwdrivers incorporate an additional hexagonal bolster for high torque applications, when used with an open end spanner.The Stanley Tools FatMax® Bolster Screwdriver Type: Flared.Size: 8mm.Blade Length: 175mm.
The Jointer plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter. Length: 560 mm (22in).Cutter width: 60 mm (2.3/8in).
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 19mm
The Stanley STA1-05-932 Telescopic Drywall Support has the following features:heavy-duty ribbed aluminum body stays flat and rigid;Adjustable pole for easier lifting of boards and holding into place until fastened;Efficient clamp design to hold board firmly in place. Specifications:Height in mm: 1150
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 800mm (32 in)
STANLEY Slide Snap-Off Knife with Blade Breaker. The integrated break-off mechanism allows you to safely break off blunt blade segments, saving time and ensuring work safety. Blade breaking can be done with one hand for less down time. Its break-proof plastic housing feaures a slide lock for quick and intuitive blade depth adjustment. The ergonomic design and bi-material handle provide added grip, comfort and safety. There is also a stainless steel blade shaft for durability. 1 x 18mm snap-off blade included in delivery.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 2-16-268 FatMax® Thru Tang Chisel 3 Piece Set includes 1/2, 3/4 and 1 inch chisels.
Marking Gauge made from moulded plastic. The plastic stock has an abrasion resistant metal insert and the stem is calibrated for easy setting. It also has graduation marks at 2mm intervals.
Roughneck Cold Chisel made from drop-forged steel, heat-treated and tempered. They have a black powder-coated finish.The Roughneck ROU31979 Cold Chisel 203 x 25mm (8in x 1.inch) 19mm Shank
This Roughneck Telegraph Digger Bar has an extra wide chisel blade for heavier breaking and a pointed tip for breaking stone and concrete. With a drop-forged steel construction that has specific heat-treated working areas, and a black finish with polished tips.
The Roughneck Mattock & Pick Twin Pack contains the following: 1 x Pick Mattock Head made from roll forged alloy steel, hardened and tempered, with a black painted finish. Pointed pick at one end and mattock on the other, ideal for cutting roots and breaking up soil. Head Weight: 2.27kg (5lb) 1 x Cutter Mattock Head made from roll forged alloy steel, hardened and tempered, with a black painted finish. It has a horizontal mattock edge at one end and a vertical one at the other. Ideal for cutting roots and breaking up soil. Head Weight: 2.27kg (5lb) 2 x Fibreglass Handles made from double injected fibreglass with a solid core for added strength. With a polypropylene cover for reduced vibration and added comfort. Length: 915mm (36in)
This Teng Tools Aluminium Clip Rail is ideal for mounting on a wall or for use in a toolbox, to conveniently store Teng sockets. It is suitable for use with clips for 1/4 inch, 3/8 inch and 1/2 inch sockets, which clip onto the single track rail and which hold the socket in place. Clips NOT included.The TENALU430 Section Rail has the following length: 430mm (17 inches).
The Norbar Torque Screwdriver is accurate, comfortable, durable, and easy to use. Its accuracy exceeds the minimal requirements of ISO 6789:2017 (±6% for tools up to 10 Nm). It is supplied with a 1/4in hexagon bit holder. It comes supplied with a traceable calibration certificate (for the clockwise direction). The comfortable, durable handle is constructed using two materials; a base material for strength overlaid with a soft feel grip for comfort and slip resistance. For maximum versatility and particularly for applications with limited access, the bit holder can be removed and replaced with widely available screwdriver blades. The screwdriver allows for easy torque adjustment without the need of additional specialist tools, and also has a lock to prevent accidental adjustment of the set torque. The tool ‘slips’ when torque is achieved, removing the possibility of ‘over tightening’. Kits come with a range of 12 bits, packaged in a quality hinged box.The Norbar 13700 Torque Screwdriver Kit, comes with the following: 3 x TORX Bits: TX10, TX15, TX20. 5 x Male Hexagon Bits: 2mm, 2.5mm, 3mm, 4mm, 5mm. 2 x Phillips Bits: PH1, PH2. 1 x Flat Bit 3mm. 1 x 1/4in Male Square Bit.
A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mmSize. 1/4 in AF
The Sievert Needle Flame Torch Kit is ideal for Jewellery, lead welding and modelling. It contains the following: 1 x 3486 Handle.1 x 3501 Neck Tube.1 x 8842 Burner.1 x Hose Failure Valve.1 x 4 Metre Hose. Single valve handle mainly for smaller burners. The spindle and valve are designed to give a very exact and quick flame setting. It has an ergonomically designed plastic composite handle and all metal parts.
The Norbar Professional Adjustable 'Mushroom' Head Torque Wrenches are fitted with Norbar’s ‘Industrial’ style of ratchet. Using the principle of ‘offset pawls’, these ratchets feature a robust tooth pattern and a narrow engagement angle, meaning that the wrench is easy to use in tight spaces. The square drive features a finger grip on the top (the ‘mushroom’ head) that assists with running down the nut until resistance is met. The square drive can also be removed and replaced in the opposite direction so the wrench can give torque control in both the clockwise and anti-clockwise directions. The ‘Industrial’ ratchet is specifically designed for torque wrench application and provides users with the perfect combination of strength, versatility and ease of use. Factory calibrated to ±3% and the new mechanism ensures that the accuracy is retained for longer. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism that is quick and intuitive to use and prevents accidental wrench adjustment. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Every wrench is supplied with a declaration of conformance of ISO 6789:2017 and in a sturdy plastic case.Norbar Pro 400 Adjustable 'Mushroom' Head Torque Wrench 3/4in Drive 80-400Nm Part Number: 15006.Accuracy: ±3%.Operates Between: 80-400Nm/60-300lbf ft.Square Size: 3/4in.Ratchet Teeth: 60.Ratchet Diameter: 51mm.Length: 686mm.Weight: 1.93kg.
Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope. Length: 300mm (12in).Inch Gauge 12 in long Thickness: 0.002 in
IRWIN Record Heavy-Duty 120 Series G Clamps are the strongest Record clamps, recommended particularly for metal working and fabrication work where a very high clamping force is demanded. They have a drop-forged steel frame for strength and durability with a swivel shoe which helps clamping on uneven surfaces. The twin-start ACME cold rolled thread for faster operation and the fused steel handle will bend before the clamp can be overstressed. A popular general purpose clamp for heavy-duty applications, for use in wood and metal working and other trades . Avalible in the following sizes: REC1203: 75mmREC1204: 100mmREC1206: 150mmREC1208:200mmREC12010: 250mmREC12012: 300mmIRWIN Record Heavy-Duty 120 Series G-Clamp Size: 76mm (3 in). Throat depth: 57mm (2 1/4 in).
The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 300mm (12in).
The Faithfull Plasterer's Bath is manufactured from heavy-duty polyethylene and is virtually unbreakable. Guaranteed not to rot, rust, crack or distort in adverse weather conditions. Strong, light and easily carried. Ideal as a rendering skip, water trough, or rubble container. Capacity: 165 litres.
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight: 680g (1 1/2lb).
These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA from high-quality steel. 1 x Estwing Ultra Framing Hammer NVG 425g (15oz).
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB75 Gorilla Tub Large Size 75 Litre (16 gal) has the following specification: Height: 37cm.Diameter: 57cm.Colour: Yellow.
