Quick drying water and oil resistant ink which marks on almost any surface.Container with 72 pens.In a variety of colours for different applications (black, red, green and blue).
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.0Blade Length 75mm (3 in)
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.1Blade Length 100mm (4 in)
This MaxSteel G clamp has an advanced frame design to resist flexing and bending, and has a high-visibility corrosion resistant finish.Made from a heavy-duty malleable iron and steel construction, it also has roll-formed screw threads to ensure smooth operation and durability.Oversized T-handle for extra torque.Size 100mm (4in)
This MaxSteel G clamp has an advanced frame design to resist flexing and bending, and has a high-visibility corrosion resistant finish.Made from a heavy-duty malleable iron and steel construction, it also has roll-formed screw threads to ensure smooth operation and durability.Oversized T-handle for extra torque.Size 150mm (6in)
The Stanley STA 0-65-438 FatMax® Screwdriver 7 piece set includes:2 x Parallel: 3.5 x 75mm and 5.5 x 125mm1 x Flared: 6.5 x 150mm2 x Pozidriv: PZ1 x 100mm and PZ2 x 125mm2 x Phillips: PH1 x 100mm and PH2 x 125mm The Stanley FatMax ® Screwdriver sets have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage. The handles are moulded directly to the shaft for a virtually unbreakable bond - giving long life and durability. The screwdrivers have a pinched 'waist' design which allows for high speed screw rotation and ahooking hole for easy and practical storage. The soft-grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.
The Stanley STA 0-65-425 7 piece FatMax® Screwdriver Set Parallel / Flared / Pozidriv 7 piece set includes: 3 x Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm.2 x Parallel: 3mm x 100mm, 3.5mm x 75mm.2 x Flared: 5.5mm x 100mm, 8mm x 150mm. These Stanley FatMax ® Screwdriver have a chrome vanadium steel bars which allow high torque and reduce the risk of tip breakage. The handles are moulded directly to the shaft for a virtually unbreakable bond - giving long life and durability. The soft grip handles give a perfect combination of great grip and reduced fatigue in use and are colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 8.0mmBlade Length 150mm (6 in)
The Stanley FatMax® Pozidriv Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.Stanley FatMax® VDE Insulated Screwdriver Pozidriv Tip has the following specification: Tip Size: PZ2.Blade Length: 125mm (5in).
The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification: Tip Size: 2.5mm.Blade Length: 50mm (2in).
This Stanley FatMax® Ratchet Screwdriver has a pistol grip design for higher torque loads. It has a bi-material handle for grip and comfort and it features internal bit storage to keep bits close to hand. The screwdriver features a 40 tooth mechanism with a 9° working arc. Its magnetic bit retention helps to prevent bit loss.
The MaxSteel heavy-duty bench vice is made from cast iron for strength and durability. The base bolts directly to the workbench surface for stability, and swivels and locks for versatility. Roll-formed screw threads ensure smooth operation and durability. Chrome plated hardware resists corrosion.Size: 150mm (6 in).
This Stanley FatMax® automatic, spring loaded Wire Stripping Plier strips inner and outer sheaths on wires and cables 0.2-6mm. The pliers have crimping capability and are colour coded for crimps on common insulated and non insulated terminals 1.5-6mm. In addition, they also have an integrated wire cutter. These wire stripping pliers have an adjustable stripping depth, with a slider that allows fast pre-setting of pre-determined strips 6-18mm. In addition, they allow an adjustable stripping force for strips on smaller cables. They have bi-material handles, allowing easy grip and the simple application of large forces needed for crimping and stripping. Stripping capacity: 0.2-6mm. Cutting capacity: 0-10mm. Stripping length: 6-10mm. Crimp capacity: 1.5-6mm.
Three piece handled file set for metalwork applications. These files will give a good professional finish to any work piece.The blade is high carbon steel for strength and durability and the bi-material handle has a hang hole for convenient storage. 1 of each 8in flat, half-round and three-square.
Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 140 x 10mm (5 1/2 x 3/8 in).
The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification: Tip Size: 5.5mm.Blade Length: 150mm (6in).
The Stanley FatMax® Tenon Back saws have the following features:Reinforced back for extra rigidity makes a straighter cut; Handle screwed to blade for extra strength;Finger rest - ergonomic design, useful for extra control when starting a cut;Triple edged teeth cut on both push and pull strokes for ease of cutting;Induction hardened teeth; 45° and 90° angle quick reference points;Bi-material handle for improved grip and comfort.The Stanley STA217202 FatMax® Tenon / Back saw comes in the following:Size: 360mm (14 inch)Teeth: 13 tpi
The Stanley Intelli Tools Digital Infrared Thermometer is accurate to within 3° with a wavelength between 630-660nm and a temperature range of -38°C to +520°C. This large range allows users to effectively complete their desired tasks. With a high contrast, back lit display for visibility in all light conditions and an IP20 casing that provides protection against dust, increasing its working life. Features thermal leak detection, from a reference temperature (green screen). Scanning an area will show a red screen for high temperature and blue screen for low temperature. Its 8:1 spot ratio allows for users to measure a 32cm circle from 2.5m distance. Emissivity 0,95, covers all thermal radiation emission of most materials. Powered by 2 x AA batteries which are supplied.
FatMax® Combination Pliers with the following features: bi-material handles, heat treated chrome steel forging, interlocking joint assembly and high frequency heat treated cutting edge. An all round plier for gripping and cutting.1 x Stanley FatMax® Combination Pliers 200mm (8in)
The Stanley FatMax® Torpedo Level (3 Vial) with a die-cast aluminium body and solid block vials for maximum durability. It has a pipe groove, and is ideal for use on rounded surfaces. The level has magnets in its base which make it ideal for erecting scaffolding. Has a 5 year accuracy guarantee under warranty.
The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).
The IRWIN® Quick-Grip® Mini Bar Clamps have a revolutionary design and are fast and easy-to-operate. The high-tech resin body is sturdy and temperature resistant, and the 70kg clamping hold load makes for a perfect lightweight 3rd hand. The clamps have non-marking, stay-on pads that protect the work surface. Ideal for smaller jobs and applications in tight working areas. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.2 x IRWIN® Quick-Grip® Mini Bar Clamps 300mm (12in)
The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901, 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 903 Internal Micrometer has the following specification: Range: 2-12in.Head Range: 0.50in.
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966/2 Traditional External Micrometer has the following specification: Micrometer Range: 1-2in.Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.Resolution: 0.001in.
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.
The Moore & Wright Spring Joint External Calipers have a bow spring that ensures uniform tension over the working range. They have a centrally mounted adjustment screw that offers a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards.The Moore & Wright 526R Spring Joint External Calipers have the following specification: Size: 150mm (6in).
The Moore & Wright Reversible Base Depth Gauges have accurately ground top and bottom faces to allow the base to be reversed perfect for use in confined spaces. There is a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are graduated on both sides.The Moore & Wright 43M Reversible Base Depth Gauge has the following specification: Size of Base: 18/56mm.Width: 5.5mm.Thickness: 1.0mm.Length of Blade: 195mm. Metric Scale Graduations : Front Face: 0.5mm and 1.0mm, Rear Face: 1.0mm.
The Moore & Wright Spring Joint External Calipers have a bow spring that ensures uniform tension over the working range. They have a centrally mounted adjustment screw that offers a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards.The Moore & Wright 524R Spring Joint External Calipers have the following specification: Size: 100mm (4in).
1 x Moore & Wright 4004 Engineer's Square Grade B 100mm (4in) in Retail Packaging. Specifications: Blade Size: 130.2 x 25.4mm.Stock Size: 76.2 x 25.4mm.Inner Working: 57.0 x 104.8mm.
The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11020DBL calipers have the following specifications: Range: 0-200mm (0-8in).Resolution: 0.01mm (0.005in).Jaws: 50mm.
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).
The Thor hardwood mallets have a laminated cylindrical compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. The mallets have a conical self-locking handle and come in 3 different weights. These have an excellent resistance to impact and will give a long service life, they are suitable for hot work applications. Typical uses for these mallets include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.Weight: 750g (1 3/4lb).Diameter: 67 mm (2 3/4in).
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 590g (1 1/2lb).Diameter 32mm (1 1/4 in).
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.108: Size 0. Weight 60g (2oz).Diameter 25mm (1in).
