The Irwin IRW10507234 mortar raker adaptor is to be used together with cutters and this reduces the risk of breakages and ensures a longer lifetime of the cutter.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).
The Wiss M-6R Metalmaster® Compound Snip has offset blades to keep the material away from hands, allowing straight and circle cuts to be made easily. Will cut up to 1.2mm thick mild steel. Red vinyl grips. Cut left and straight. Specification Size: 235mm (9.1/4in).Blade Length: 32mm (1.1/4in).Capacity: Low Carbon Steel: 18 ;Gauge/1.22mm.
The Stanley FatMax® Demolition Hammer has a one-piece forged construction with a demolition claw head with a large, knurled anti-slip strike face. There is also a bevelled nail slot for easy nail pulling. It has a long handle fitted with an ergonomically designed grip for comfort and vibration dampening. It is ideal for prying, pulling and plasterboard grabbing.
The Vitrex Professional Notched Adhesive Trowels are designed for use by the professional installer and are made to the finest quality. They have stainless steel bases and reinforced, dual riveted, rust resistant blades for longer life. The trowels also have two exposed rivets at the top of the staft which strengthens the hold on the blade, so that the blade will not come away from the shaft when lifting a tile. A soft grip handle provides extra comfort. Size: 115 x 280mm (11 x 4.1/2in).Vitrex Professional Notched Adhesive Trowel. Size: 115 x 280mm (11 x 4.1/2in).Square Notches: 4mm.
Safety rule with a unique M profile which keeps the fingers well away from any knife edge when used for cutting or scoring card etc. The rule is stainless steel to give a long corrosion-free life. Metric scale.Ideal for hobby work and craft work in the educational field. Size: 300mm.
Replaceable jaw plates are available for all Mechanics, Fitters, multi-purpose and Engineers vices. They are hardened, CNC machined and supplied in pairs complete with screws or bolts ready to fit.Replaceable jaw plates for No.5 vice. Jaw Width. 125mm (5 in).
These Faithfull Coping Saw Blades are manufactured from high quality steel for strength and durability. The teeth configuration on coping saw blades is specifically designed to ensure smooth and fast cutting especially when making turns to follow contours, and cutting shapes. For use with Faithfull (FAICS) Coping Saw.The Faithfull FAICSBS coping saw blades have the following specifications:Application: Wood cutting. Length of blade: 165mm (6 1/2 inch). 14 tpi.
Replaceable jaw plates are available for all Mechanics, Fitters, multi-purpose and Engineers vices. They are hardened, CNC machined and supplied in pairs complete with screws or bolts ready to fit.Replaceable jaw plates for No.3 vice. Jaw Width. 100mm (4 in).
The Mega Drive range of screwdrivers feature a unique ergonomically designed, bi-material handle which give excellent grip. With exhaustive quality control tests, these Teng Tools screwdrivers ensure that the head fits securely into the screwdriver head, allowing torque to be applied more easily. The screwdriver blades are made from strong Chrome Vanadium Steel with black tips, and are manufactured to DN5264. Supplied in storage tray. Contents: 3 x Flat Screwdrivers: 3 x 75, 5 x 75 & 6 x 100mm.3 x Phillips Screwdrivers: PH0 x 75mm, PH1 x 75mm, PH2 x 100mm.1 x Pozidrive Screwdriver: PZ2 x 100mm. Specification Dimensions: 265 x 142 x 50mm.Weight : 0.6Kg.
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 17mm
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381505 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 5mm.
This 5 piece set of Screw Extractors is supplied in a handy storage case. The extractors allow quick and easy extraction of broken screws, pipes and stud bolts. To fit drill sizes: 7/64 inch, 9/64 inch, 5/32 inch, 1/4 inch and 19/64in.
This Teng Tools 9 piece set consists of 1/2 inch drive hexagon bit sockets for internal heads. The bit sockets are manufactured from chrome vanadium steel for strength and durability and have a satin chrome finish. They are supplied on a clip rail, which is ideal for both wall mounting and for use in a toolbox. The set comprises the following bit socket sizes:5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm and 17mm.
This Hultafors CFP Screw Clamp has the following specifications: Clamping Capacity: 300mm (12in).Throat Depth: 140mm.Rail Dimensions: 25 x 12mm.Weight: 1950g.
The Hultafors HVT Voltage Tester made with a transparent insulated handle, diode and plastic-coated blade. For use up to 1000 V AC, 120-250V. CE marked. VDE/GS-marked. IEC 60900 certified. Specifications: Tip Size: 0.6 x 3.5mm.Blade Length: 100mm.
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)
The Hultafors UBS Safety Utility Blades made with a blunt point to minimize the risk of stick injuries, yet still offers full long-life sharpness for cutting with precision and control. Made from SK5 carbon steel and hardened to 58-60 HRC. Comes as 10 blades, packed in a practical spring-loaded dispenser for easy blade change. The dispenser fits inside the handle of Hultafors utility knives. Used blades can be stored in the back of the dispenser to keep the workplace safe.
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 600mm (24in)
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC25 Heavy-Duty Chisel 25mm
The Hultafors Deep-Hole Marker is ideal for marking in hard-to-reach places and narrow holes. Permanent ink for use on most materials and surfaces. Available in red or black.1 x Hultafors Ink Deep-Hole Marker Black
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
This Teng Tools 1/2 inch square drive Torx socket is manufactured from high quality chrome vanadium steel to conform to all the latest DIN and ISO standards. The socket is branded and labelled for easy identification, and specially designed to help prevent damage to fastenings.The TENM120711 TX-E 1/2inch square drive socket has the following specifications:Overall length 37.8mm.Size. 9.7mm (E11).
A professional 3/8 in drive regular 6 point AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety.Manufactured from chrome vanadium steel with a satin finish.Size: 7/16 AF.Overall length 25.7mm
This Teng Tools 17 piece socket set consists of regular 6-point, 1/2in drive sockets. The sockets are made from chrome vanadium steel for strength and durability and have a satin finish. They are supplied complete in a handy storage tray. Supplied in storage tray. Contents : 17 x Regular 6 Point Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30 & 32mm. Dimensions: 265 x 142 x 50mm.Weight: 1.8kg.
A professional 1/4in square drive matt chromed deep hexagon socket. Produced in accordance with ISO 9000 and AS 954 specifications. Features the Teng Tools hip grip system for increased torque and reduced risk of rounding fasteners. Overall Length: 49.5mm.Size 11mm
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 9mm
