The Roughneck Gorilla Electrician's Bolster is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting.
The Roughneck Gorilla Brick Bolster is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting.1 x Roughneck Gorilla Brick Bolster with Non-Slip Hand Guard 76 x 279mm (3 x 11in)
The Roughneck Fencing Pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. They are fully painted black to protect against rust. The tips are hardened for use in hard ground.10 x Roughneck Fencing Pins 12mm x 1200mm
This Roughneck Fencing Maul is ideal for driving home wooden fencing posts. The large round striking face makes it much easier and safer than using a sledgehammer. Cast head with double round striking faces. Solid core fibreglass handle with polypropylene jacket for shock absorbance. Double injected TPR soft-grip handle for added comfort fixed with industrial grade epoxy for longer lasting bond.1 x Roughneck Fencing Maul 6.35kg (14lb)
The Roughneck Posthole Digger has a long chisel blade for posthole digging and a tamper head for tamping, especially useful at the base of a hole. With a drop-forged steel construction that has specific heat-treated working areas and a black finish with polished tips.
The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.The Britool BRIE113205B Combination Spanner 10mm has the following dimensions:Size: 10mmLength: 140mmWeight: 37g
Record IRWIN Mechanics vices are the most popular and widely used general purpose vice for light to medium-duty applications. The vice has high quality grey iron castings that resist distortion under severe pressure, with a smooth action provided by dovetailed, long barrelled, unbreakable nut and hardened steel replaceable jaw plates.Record Irwin No.8 Mechanics Vice. Jaw Width: 200mm (8in).
Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug. The metric set contains: 5, 6, 8, 10, 12.5, 16, 20, 25 and 32mm sizes. The imperial set contains: 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes.Set contains: 1/4,5/16,3/8,7/16,1/2,5/8,3/4,7/8 and 1 in sizes.
The Maun Olive Cutter Tool has been designed to quickly remove a compression olive, ring, or ferrule without damaging the copper pipe. Its high-quality steel cutting blades are hardened and tempered to HRC 45. They provide a reliable cut every time, with minimal hand pressure. Multiplies hand force by 15 times for less cutting effort. Its zinc-plated handles are fitted with soft plastic grips for added comfort and feature a reliable return-spring handle action. Ideal for professional plumbers, especially when moving radiators and serious DIYers tackling similar jobs. Comes with a standard 12-month warranty. Register your tool to extend this to 2 years. Made in England. 1 x Maun Olive Cutter Tool 10mm
The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment. The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.Size. 5.1/2in - 140mm
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size: 1000 x 50mm (39 x 2in).
The Stanley Metal Spring Clamp has injection moulded jaw pads to prevent marring or damage to the work surface. The stamped metal construction provides strength, whilst the cold-formed spring provides long life. The clamp has ergonomically designed handle pads that fit securely and will not slip.Opening: 25mm (1in).Pack of 1.
The Knipex 88 01 Series Alligator® Water Pump Pliers with dipped PVC handles and a box joint design prevents slipping from the workpiece. The gripping surfaces have special hardened teeth to approx. 61 HRC offering high wear resistance and stable gripping. They are made from chrome vanadium electric steel, that has been oil-hardened. They offer more output and comfort compared to conventional water pump pliers of the same length and have a 9-notch adjustment positioning for 30 % more gripping capacity. The slim design of the head and joint area provide good access to the work piece and self-locking on pipes and nuts means no slipping on the work piece and low hand force required. Alligator® water pump pliers have a robust construction, insensitive to dirt. Particularly suitable for outdoor work. The guard prevents operators fingers being pinched. Specification Capacity: 88 01 180: Hex: 36mm, Pipe: 42mm.88 01 250: Hex: 46mm, Pipe: 50mm.88 01 300: Hex: 60mm, Pipe: 70mm.88 01 400: Hex: 95mm, Pipe: 90mm.Knipex 88 01 250 Alligator® Water Pump Pliers PVC Grip Length: 250mm (10in). Capacity: 36mm.
Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope. Length: 300mm (12in).Inch Gauge 12 in long Thickness: 0.005 in
These Knipex 82 Series TwinGrip Slip Joint Pliers have a high-grip front jaw with robust teeth and high gear ratio at the tip of the mouth. Sustaining a large front and side gripping capacity, it offers reliable front gripping of flat workpieces thanks to its three-point system. Forged from high-grade chrome vanadium electric steel, oil-hardened, as the teeth have been additionally induction-hardened to approx. 61 HRC. The Knipex Pliers have a five-way adjustable slip joint with push button adjustment for precise adjustment of gripping capacity. These slim pliers let you work in confined installation spaces, with a narrow turning zone for fast results, along with a pinch stop reducing the risk of crushed fingers. Durable and resilient due to the robust box joint, and suitable for gripping, tightening and loosening screws with troublesome worn heads, and threads. Specification: Capacity: Pipes/Nuts Ø 4-22mm. (5/32-7/8in).These Knipex TwinGrip Slip Joint Pliers are fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 200mm. (7.9in).Capacity: Pipes/Nuts Ø 4-22mm (5/32-7/8in).
Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter inverted to double up as a 6. Packed in attractive plastic box.Size. 4mm (5/32 in).
The Knipex 70 01 series of diagonal cutters are constructed from chrome vanadium solid style forged top quality steel with precision non slip tips for added strength and durability. They combine high quality material and precise workmanship for long service life. The induction-hardened precision cutting edges offer clean cutting at the cutting edge tips. These pliers are suitable for cutting thin copper wires. The narrow head style is ideal for use in confined areas. Like most of the Knipex range of pliers all components of these cutters have oil hardened edges and they are made from Vanadium electric steel forged to approximately 62 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have polished head and plastic PVC dipped coated cushion grip handles for added durability and comfort. Knipex 70 01 series of diagonal cutters are ideal for all trade or DIY applications and especially for the electrical trade. These Knipex diagonal cutters come in 125, 140, 160, and 180mm versions for all types of work applications. High quality material and precise workmanship for long service life.160mm (6 1/4 in)
The Knipex 82 01 TwinGrip Front and Side Gripping Pliers are ideal for gripping, tightening and loosening screws with worn heads and threads. The three-way adjustable slip joint with push button adjustment allows for precise alteration of gripping capacity.The jaw features a high-grip front with robust teeth and high gear ratio at the tip of the mouth. The side jaw design also features optimised geometry with locking effect for maximum grip when loosening and tightening.Fitted with plastic coated handles for added comfort. They have a very slim design and will work in confined spaces thanks to the slim turning zone for fast screwing. A pinch stop reduces the risk of crushed fingers.
These Knipex 82 01 150 TwinGrip Front and Side Gripping Pliers have the following specifications:Length: 150mm.For Diameters and Width Across Flats: 3-16mm.Max. Frontal Gripping: 6mm.
Knipex 87 Series Cobra® Quickset Hightech Water Pump Pliers are made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. They combine the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas. The adjustment directly on the workpiece is possible by simply sliding the pliers handle. They offer reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. To re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again. Available with PVC or Multi-Component grips. SpecificationPipe Capacities R = Round H = Hex & Adustments;87 21 250: R: 50mm, H: 46mm, 25 Adjustments. 87 21 300: R: 70mm, H: 60mm, 25 Adjustments.87 22 250: R: 50mm, H: 46mm, 25 Adjustments.Knipex 87 21 250 Cobra® Quickset Water Pump Pliers PVC Grips
Knipex 87 Series Cobra® Quickset Hightech Water Pump Pliers are made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. They combine the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas. The adjustment directly on the workpiece is possible by simply sliding the pliers handle. They offer reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. To re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again. Available with PVC or Multi-Component grips. SpecificationPipe Capacities R = Round H = Hex & Adustments;87 21 250: R: 50mm, H: 46mm, 25 Adjustments. 87 21 300: R: 70mm, H: 60mm, 25 Adjustments.87 22 250: R: 50mm, H: 46mm, 25 Adjustments.Knipex 87 21 300 Cobra® Quickset Water Pump Pliers PVC Grips
The Knipex Black Atramentized High Leverage Concreter's Nippers offer substantially higher cutting performance, as well as a damping of the cutting stroke after cutting the binding wire, two valuable ergonomic advantages for the user. They can twist and cut wire in one operation, making them fast, reliable and economical. Made from special tool steel that has been oil-hardened and tempered with an extra slim form, making them ideal for tying submerged positioned steel rods. They provide a particularly high cutting capacity with minimum effort due to their optimum transmission ratio. High damping of the cutting stroke after cutting the binding wire reduces strain on tendons and muscles.These Knipex Black Atramentized High Leverage Concreter's Nippers have the following specification: Overall Length: 300mm (12in)Wire Cutting Capacities: Hard 2.0mm; Medium 3.8mmHead Width: 25mmCutting Edge Length: 25mmWeight: 501g
The Knipex 95 62 Series Wire Rope Cutter has a lightweight, compact design, however it is powerful enough to cut high strength wire rope. This cutter requires up to 30% less physical effort compared to wire rope cutters of the same length, thanks to the integrated opening spring. Made from ball bearing steel with a double-mounted box joint design for a high level of stability. The cutting edges have been additionally induction hardened, approx. 64 HRC. The cutters can be secured via a locking device for safe transportation. Ideal for cutting copper and aluminium cables, single and multiple wire cables and ACSR cable. Specification: Cutting Capacity: Copper & Aluminium Cables 6mm; ACSR Cable 4mmLength: 160mm
Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.
These Knipex KPX 97 52 06 crimping pliers reduce hand forces up to 30%. Compared with regular crimping pliers, due to optimised lever ratio. Two hand operation for easy crimping of large diameters possible. With precise crimping dies and integral lock with self-releasing mechanism when correct pressure reached. These Knipex KPX975206 are well balanced centre of gravity with angled head and ergonomically PVC designed handles. Adjustable crimping pressure, makes it a breeze when lots of crimmping is requires so reducing user fatique. Made from specially hardened and tempered special tool steel for added strength and durability. Head are burnished and handles plastic coated for added grip and user comfort. Length 250mm.For cable links and ferrules
The Knipex 02 02 range of high leverage combination pliers have an eccentric joint for powerful gripping, seizing and offer 50% easier cutting ability on all work applications. the 02 02 range comes in 180, 200 and 225mm versions with soft cushion grip handles for added comfort and a better grip. The 02 02 series are ideal for soft, hard and even piano wire cutting. The strong durable edges will make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex ranges of nippers and cutters the 02 02 range pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 63hrc.These Knipex High Leverage Combination Pliers have the following specification: Length: 225mm (8.8in).Cutting Capacity: Piano: 2.5mm, Hard: 3.0mm.
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 200mm (8in).Cutting ;Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Strand: 13.0mm.
To twist and cut wire in one operation, then the Knipex 99 01 250 Concreter's nippers are the ones for you. They are fast, reliable and economical and will make light work of the toughest of job applications. The 99 01 250 nippers are precision made to give a long service life, making these the most widely purchased Concreter's Nippers in the world. The cutting edges, with hardness to approx 61 HRC, will help make light work on soft and annealed tie wire used on reinforced rods or large braided reinforced concrete mesh. Knipex 99 01 250 Concreter's nippers are made up from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.KPX9901220 Concreter's Nipping Pliers. Length 220mm (8 1/2 in).
This Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contents: 1 x 86 04 100 Pliers Wrench XS with one-handed fine adjustment, 10 positions, simply push for the easy adjustment to different work piece sizes. It has an enormous gripping capacity, the parallel jaw opening grips continuously up to 21mm width across flats. Smooth jaws allow for the gentle assembly of sensitive fittings, and parts with delicate surface finishes. The Wrench XS can be used directly on chrome, due to the smooth full-surface contact and are ideal for a wide variety of applications, precision engineering or plumbing. The set are an essential part of any bicycle or motorcycle toolkit, EDC (Every Day Carry) and model making. Specification: Overall Length: 100mm. The 1 x 87 00 100 Knipex Cobra XS Water Pump Pliers are fully functional, high-tech water pump pliers that really comes into its own in tight spaces. With fine adjustment directly on the work piece, this tool provides eleven adjustment positions and can grip nuts up to 24mm in diameter, and other pieces as large as 28mm, and can be easily used with only one hand. Like all products in the KNIPEX Cobra family, the Cobra XS is of course self-locking on pipes and nuts: Resulting in no risk of slipping at the work piece. Operations such as gripping, holding, pressing, and bending are considerably less strenuous. Specification: Overall Length: 100mm.Nut Capacity: 24mm.
These Knipex Bolt Cutters offer a high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its forged-in stopper features a comfortable shock-absorber. They offer good access due to very flat construction of head and joint area. Ergonomically angled handles minimise effort. Fitted with sturdy, non-slip two-colour multi-component handle sleeves. There is also an eccentric bolt enabling precise adjustment (12 positions). Bolt cutter head is replaceable if needed. Specifications: Cutting Capacity Ø : @HRC 1913mm, @HRC 4010mm, @HRC 489mm. Overall Length: 910mm. Cutting Edge Length: 46mm. Head Thickness:42mm.
The Knipex 73 72 180 Twinforce side cutting pliers have a black atramentous finish, polished head, and handles with multi-component grips. The double-hinged design gives an ideal transmission of force resulting in extremely easy cutting with little strain. They are capable of making cuts 50% more easily than the tried and tested KNIPEX high leverage diagonal cutters and reliably cuts all types of wire, including steel tape. Low cutting impact is gentle on hands and the tension on muscles and tendons is relieved. Made from Chrome vanadium heavy-duty steel, forged, oil-hardened. Cutting Capacity: Soft: 5.5mm, Medium Hard: 4.60mm, Hard: 3.20mm, Piano: 3.00mm.
Knipex Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending work pieces. Fast adjustment at the touch of a button with the tool on the work piece. Lever ratio greater than 10-1 for strong gripping power. The 3 Piece Set is supplied in a practical, hard-wearing polyester fabric tool roll protects your tools and the hook-and-loop fastener keeps them within easy reach. Contains the following sizes: 125, 180 and 250mm.
These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics. There are 2 versions in the 64 range - a 120mm 15° Angled head, and a 115mm 27° Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter. These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life. These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand. Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.Length: 120mm.End diagonal cutter with small bevel - 15° .
