The Monument 170 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for Monument stiffnuts 27 mm and 32 mm and for 1/2-inch BSP 27 mm nuts, 3/4-inch BSP 32 mm nuts. Comes complete with 3/8-inch cordless drill adaptor and comes with full user instruction manual
Monument Pro Gas Torch is suitable for soldering and brazing of copper, brass and aluminium, and for use with propane and MAPP® gas. It has interchangeable tips. The Gas Torch features Piezo ignition for ease of use, and produces a hot turbine flame, which can be locked via a lock button. The size of the flame can be altered by an adjustable valve. An ergonomic hand grip improves user comfort.Monument 3475g Pro Gas Torch EN12205. Supplied with a Super Turbine Tip.
Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 737M No.5 Beechwood Lead Dresser.Face: 75 x 225mm (3 x 9 in).
Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 38mm.Cutting ;Capacity: ;Piano: ;1.4mm, Hard: ;2.0mm.Weight: 252g.
These Stanley 3 Piece ControlGrip™ Plier Set made from drop forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control. Contents: 1 x ControlGrip™ Diagonal Cutting Plier.1 x ControlGrip™ Groove Joint Plier.1 x ControlGrip™ Combination Plier.
Stanley STA079153 FatMax® T Handle powerful professional ratchet handle for rapid tightening and loosening of all fastener types. T profile enables extra torque for stubborn fasteners. Complete with a selection of extra long slim bits for all pattern fasteners in all situations and applications. Ratchet Power Key Set 27 Piece Case Size: 11 x 7 1/2x 1-Inch1 x 3mm x 35mm Slotted Bit 1 x 4-5mm x 35mm Slotted Bit 1 x 6-8mm x 51mm Slotted Bit1 x 4-5mm x 150mm Slotted Bit 1 x 6-8mm x 150mm Slotted Bit 1 x PZ1 x 35mm2 x PZ2 x 35mm 1 x PZ3 x 35mm1 x PZ1 x 150mm2 x PZ2 x 150mm1 x PZ3 x 150mm1 x PH1 x 35mm1 x PH2 x 35mm1 x PH3 x 35mm1 x T15 x 150mm1 x T20 x 150mm1 x T25 x 150mm1 x 2.5mm x 116mm Hex Bit1 x 3.0mm x 116mm Hex Bit1 x 4.0mm x 164mm Hex Bit1 x 5.0mm x 164mm Hex Bit1 x 6.0mm x 164mm Hex Bit1 x 8.0mm x 164mm Hex Bit1 x Ratchet Handle1 x Plastic Case
Manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are resistant to temperatures from -20° to +70° C making them ideal for use in demanding or hostile environments. Type: Wire Stripping Plier Length: 170mm
The Stanley 9 piece set of hex keys in a cleverly designed triangular set provides neat and secure storage, whilst providing increased turning power during use. Sizes: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5 and 6mm.
The Stanley Tools FatMax® Premium Auto-Retract Tri-Slide Safety Knife has a metal body with ergonomic, slip resistant bi-material grip for durability, comfort and control. The pressure-sensitive blade automatically retracts once disengaged from the cutting surface. The oversized, contoured tri-slide button can be engaged from 3 positions: top, left and right side. There are 3 blade depth settings and a blade lock to help prevent accidental blade exposure. It offers quick, tool-free blade change. There is also a lanyard hang hole and integrated blade storage in the handle. Ideal cutting solution for corrugate, tape etc. It accepts standard round-point utility blades.
The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
This 7-piece metric hexagon key set has a pocket knife style, fold away design whereby the hexagon key folds into the handle after use. The keys are made fom high tensile steel. Contains 1 of each: 2.5, 3, 4, 5, 6, 8, 10mm.
The Stanley Tools FatMax® Flared Tip Bolster Screwdrivers are colour coded and feature icon ID for quick recognition of tip pattern and size. They have a chrome vanadium steel bar that resists bending and snapping. The tips have been hardened for durability and precision machined for excellent head to fastener fit. They are fitted with a tri material handle, the inner core is moulded directly to the blade tang and then a polyprop outer with a TPR overlay for grip and comfort. This large diameter handle provides excellent torque transmission and grip. The design also features a tapered waist for fast low torque tightening. These screwdrivers incorporate an additional hexagonal bolster for high torque applications, when used with an open end spanner.The Stanley Tools FatMax® Bolster Screwdriver Type: Flared.Size: 6.5mm.Blade Length: 150mm.
A concrete chisel forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 300 x 19mm (12 x 3/4 in).
The Stanley Tools FatMax® XL Trigger Clamp has an engineered resin body, that provides minimal distortion and movement, with a die cast ergonomic release trigger, for quick-release and class leading grip. It has a tough, heat treated steel I beam bar that provides long lasting strength and durability. Fitted with removable, soft jaw plates that are grooved for improved grip and a recess for bar and rounded materials. The jaw can be easily reversed, to become a spreader without the need for additional tools. The new FatMax XL Trigger Clamp is 24% stronger than the previous model, and holds a stronger force over a 24 hour period. Clamping Force: 270kg.The Stanley Tools FatMax® XL Trigger Clamp has the following specification: Size: 150mm (6in).Clamping Force: 270kg.
The Bulldog Insulated Pick Handle incorporates a protective collar to stop your hand from slipping. Made from one piece of heavy-duty fibreglass for superior strength and durability. This tool can be used in conjunction with a number of pick heads. Please note: pick handles are tested to BS8020/2011 for insulating purposes only. We cannot take responsibility for any tool heads used in conjunction with this handle, or which may alter the properties of the handle.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Second Cut File 1-210-08-2-2 Size: 200mm (8in).Cut: Half Round Second Cut.
The RIDGID Heavy-Duty 4 Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Both models are equipped with four heavy-duty wheels. The 42-A Model has a short handle for use in confined areas. The 44-S Model has a second handle, making two-man leverage possible for large pipe sizes.RIDGID 42-A Heavy-Duty 4 Wheel Pipe Cutter Capacity: 20-50mm (3/4 - 2in).Weight: 3.1kg.
The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification Capacity: 12-32mm (1/2-1.1/4in).Length: 240-425mm (10-17in).Weight: 1.2kg (2.5lbs).
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.RIDGID Heavy-Duty Straight Pipe Wrench Size: 150mm (6in)Capacity: 20mm (3/4in)Weight: 0.2kg
The Purdy® Premium Flex Joint Knife is made from the highest quality raw materials to make prep work quick and easy. Fitted with a stainless steel blade, nail set hammerhead and non-slip handle for increased comfort. Available in a range of sizes to cater for any type of project and are designed to stand up to the toughest of jobs.1 x Purdy® Premium Flex Putty Knife 150mm (6in)
The Marshalltown 34D Wide London Pattern Brick Trowels with DuraSoft® handle, incorporating an integral finger guard for protection against callouses, heat and cold, are forged from a single piece of high-carbon steel, then heat-treated for strength and durability. Blade is taper ground and polished to give the correct flexibility and feel. Wide London pattern trowels have a rounded heel which places mortar further forward on the blade than the Philadelphia style trowels.1 x Marshalltown 34D Wide London Pattern Brick Trowel DuraSoft® Handle 280mm (11in)
This Edma Universal Slaters hammer is hand forged with a leather handle. It features a nail puller and has left and right bevels. The hammer has a polished finish. Weight: 650g.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 50mm (2 in).Weight 1230g (2 3/4lb).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: A.Weight 425g.Diameter 25mm (1 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size 4Weight 2500g (5 1/2lb)Diameter 50mm (2 in)
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.One soft grey and one hard white face.Diameter 32mm (1 1/4 in).Weight 385g (1lb).
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammer THO708. Diameter: 25 mm (1in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 3.Weight 1650g (3 1/2lb).Diameter 44mm (1 3/4 in).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 2.Weight 1260g (3lb).Diameter 38mm (1 1/2 in).
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO720 and THO2020. Diameter: 63 mm (2 1/2in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 1Weight 710g (1 1/2lb).Diameter 32mm (1 1/4 in).
The BlueSpot Adjustable Wrench is manufactured from drop forged, heat treated carbon steel for strength and durability. The wrench is chrome plated to protect against corrosion and for a high shine finish. An extra-long handle helps tackle especially tough jobs where more torque is required. The jaw design allows a better fit and the knurled wheel makes adjustments easy.This BlueSpot Adjustable Wrench has the following specification: Max. Jaw Capacity: 52mmLength: 450mm (18in)
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. MS44.Size. 115 x 45 x 13 x 5mm (4 1/2 x 1 3/4 x 1/2 x 3/16 in).Grade. Medium. With 1 Round Edge.
Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Produces a keen lasting edge. These stones may be used dry or with oil. The IB8 combination stone has one coarse and one fine face.These INDMB8 aluminium oxide bench stones have the same grit throughout, medium for sharpening dull tools Size.8 x 2 x 1 in.Grade. Medium.
