The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.
The Wiss M-2R Metalmaster® Compound Snips have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel with comfortable colour coded vinyl grips (green right hand/straight). They have compound lever action handles that are suitable for heavy stock, even when cutting tight curves. Cuts right from tight curves to straight up to 1.2mm mild steel. The snips have a convenient, protective safety latch. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.These Wiss Metalmaster® Compound Snips have the following specification: Cutting Type: Right Hand/Straight Cut.Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.
The Stanley Grip Pocket Tape has an impact resistant ABS plastic that has been encased in a sheath of shock absorbing, high-grip rubber. Providing protection against accidental knocks or drops. The rubber grips to the work surface, making it ideal for roofing and uneven work areas. It has a nylon coated blade that features both metric and imperial markings along its length, printed in clear black and red ink on a bright yellow background. The blade is not only easy to read, it also delivers excellent levels of stand-out, at around 3m. The tape features durable compression lock technology, locking the blade in place.This Stanley Grip Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 28mmAccuracy: EC Class II
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.The STANLEY CONTROL-LOCK Pocket Tape, metric graduations only, has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability.The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 8 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. This pocket tape has metric graduations only. Specifications: Blade Length: 8m.Blade Width: 25mm.Accuracy: EC Class II.
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH20 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 200mm.Throat Depth: 100mm.Rail: 19.5 x 9.5mm.Weight: 1.11kg.
These Roughneck Digging Bars have a drop-forged steel construction with heat-treated working areas, and a black finish with polished tips. They have a chisel blade for general prying and breaking, and a pointed tip for breaking stone and concrete.1 x Roughneck Digging Bar 7.7kg 25mm x 180cm
The Moore & Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 24mm.Length 330mm.
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 17mm.Length 281mm.
The IRWIN® Quick-Grip® Xtreme Pressure Clamps can be operated with a single hand and offer a clamping force of 250kg. A tool-free, Quick-Change™ function allows the jaws to be reversed to perform a spreading action. Features longer length jaws with a unique swivelling action to keep constant pressure on uneven surfaces. They also have a bar rest to allow to be placed larger items, in the clamping jaws hands-free. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.1 x IRWIN® Quick-Grip® Xtreme Pressure Clamp 450mm (18in)
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 5.Weight 5000g (11lb).Diameter 70mm (2.3/4 in)
The Estwing E3/11 dry wall hammer has a cushioned vinyl grip and solid one piece forged construction. Crowned, scored hammer head which reduces the likelihood of impact marks on the plasterboard. Cutaway and notched cutting blades for withdrawing nails and cutting laths. Head Weight: 400g (14oz)
W8 double sided (combination) diamond whetstones will not break, chip, crack, hollow or groove. These ultra precision whetstones are lightweight and have a totally rigid construction. Use water for lubrication - no oil, smell or mess and can hone ALL hard materials: carbide, steel. The grits are denoted by a dual coloured circle which is set into one end. Black: Extra Coarse Grade 220, 60 micron.Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.The Red side is suitable for all woodworking tools, carbide tooling, router bits, 3D bits etc.The Blue side is suitable for all general carpentry, tin snips, wood flat bits, augers, garden edge tools etc. Blue: Coarse 325g, 45 micronRed: Fine 600g, 25 micron
The Norbar NorTorque® Tethered Torque Wrenches are accurate up to ± 3%. They feature a built-in tethering point to secure the tool for safe work at height and a double-sided locking plunger square. Built on a trusted, versatile torque wrench design with a micrometer scale for simple and error free setting. The handle and lens materials are resistant to commonly used industrial chemicals. The lock feature helps to prevent accidental adjustment of the set torque. Pinned head in line with DROPS recommendation for ultra-safe handling of sockets when working at height. Supplied with a Declaration of Conformance, which meets the requirements of ISO 6789-1:2017This Norbar NorTorque® Tethered Torque Wrench has the following specification: Drive: 1/2in SquareRange: 20-100Nm (20-80 lbf.ft)Accuracy: ± 3%Ratchet Diameter: 38mm Weight: 0.9kg
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 2000mm
IRWIN Vise-Grip Cable Cutter have an induction hardened chromium nickel steel cutting face that stay sharper for longer. The pliers also feature machined jaws for maximum gripping strength and the moulded ProTouch™ handles for added comfort and less hand fatigue. Can cut up to 2.0 mm cables and a moulded 1 component handle that is pull-resistant.Length: 200mm (8 in).
The Hultafors CC20FME Steel Long Tape has both metric and imperial measurements. Specifications: Blade Length: 20m/66ft.Blade Width: 13mm.Accuracy: EC Class II.
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS40 Non-Rebound Hammer
The IRWIN Vise-Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever. 7RC: Length: 178mm, Capacity: 38mm.10RC: Length: 254mm, Capacity: 48mm.These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.
The ITL Insulated Linesman 240mm Pliers made with a large jaw. Ideal for gripping round and flat surfaces, includes a cutter for soft, hard and piano wire. Also includes a crimper. Fitted with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Pozidrive Screwdrivers with injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Screwdriver. Size: Pozi No.0 x 75mm (3in).
IRWIN Vise-Grip Locking C Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.Visegrip Irwin 18R Locking C Clamp Regular Tip. Length: 450mm (18in).Throat Depth: 250mm (10in).Capacity: 203mm (8in).
IRWIN Record 136/5 T-Bar Clamp is a robust clamp for heavy-duty work which offers the facility of permanent fixing to a workbench. T-bar section in cold drawn steel gives extra strength and resistance to bending. Extra long head with machined slides is extremely durable.IRWIN Record 136/7 T Bar Clamp 150cm (60 in). Bar Length: 1500mm (60 in).Capacity: 1350mm (54 in).
The Kapro 317 Adjustable T-Square is innovative and versatile. Designed for precise measurements in a variety of applications. It features an anodized aluminum finish and a double edge, heavy duty blade for durability. The dual directional printed scale is in both centimeters and inches, along with etched angle markings, allows for easy and accurate measurements. A nbsp; screw lock ensures the blade stays in place during use. Additionally, the T-square has a unique end cap ledge for additional balance and folds for easy storage. The sliding head and ABS end caps with ledge make this a dependable ruler filled with extra features. 1 x Kapro 317 Adjustable T-Square 120cm.
Marshalltown Square Notched Trowel is made to the same high standards as regular plasterer's trowels. The blade is cross-ground to maintain its shape and is polished and machine finished to ensure perfect end-to-post fit. It features alloy mountings, fully heat-treated for increased strength and hardened steel rivets attach blades to the mountings. The DuraSoft® handle provides a soft feel, reduces fatigue and offers excellent durability.1 x Marshalltown M702SD Notched Trowel Square 1/4in DuraSoft® Handle 11 x 4.1/2in
The Pony Jorgensen Heavy-Duty E-Z HOLD Adjustable Clamps allow for rapid and easy clamping. They can also be easily be converted to spreader clamps. The contoured comfort grip and quick-release lever make it simple to get a firm grasp, and our exclusive patented feature lets you join two clamps together to create a clamp with more than double the opening capacity of a single clamp. Deep-reach pads help protect your work for any marks or scuffs when using. Specifications: Reach: 3 3/8in.Load Limit: 600 lbs. 1 x Pony Jorgensen Heavy Duty E-Z HOLD Adjustable Bar Clamp 36in.
Marshalltown M180 Groover trowel with stainless steel blade, single hang and riveted mounting. Light and easy to handle with comfortable DuraSoft® handle. Size: 150 x 75mm (6 x 3in).
Marshalltown Brick Trowels are manufactured from a single piece of high grade tool steel. These trowels have been re-engineered and are produced on the most modern forging equipment available. The blades are expertly ground from heel to toe and are London Pattern with a wooden or Durasoft handle and polished steel ferrule. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels.London Pattern with wooden handle.Size. 300 x 133mm (12 x 5 1/4 in).
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 570g (1 1/4lb)
The R.S.T. SitePro Fibreglass Tape features both metric and imperial or metric only measurements on a white blade. The blade is manufactured from 42 strand fibreglass which withstands high tensile stretching. It has 3x geared high speed winding mechanism all encased within an ergonomic case. It features a folding rewind crank which sits in the middle of the tape when not being used to avoid being damaged. A metal claw at the end of the tape allows you to grip into the ground or material for easy and accurate measuring.This R.S.T. SitePro Fibreglass Tape has the following specification: Blade Length: 10m/33ftBlade Width: 13mmAccuracy: EC Class
The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance. It has a resilient DuraSoft® handle that provides a soft feel, reduces fatigue and offers excellent durability. It is available in a wide variety of widths.Marshalltown M509D Tuck / Window Pointer Size: 22 x 170mm (7/8 x 6 3/4in).
The Broadfix U Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. The ever popular U-Shim is perfect for shimming behind a screw or fixing – loosely install the fixing, and then simply slide the required number of U-Shims over the fixing. The unique comb/clip prevents the U-Shims from falling out, which leaves both hands free to tighten up the fixing.Broadfix U Packer Mixed Bag contains the following: 140 x Small U Packers 55 x 43mm. 60 x Standard U Packers 101 x 143mm.
