Steel reinforced fibre ratchet designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. 3/8in square drive. Length : 203mm (8in).
Torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45° . Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).Supplied in robust oil resistant case.3/8in square drive.Range 5 to 25 Nm / 4 to 18 ft.lb
Torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45° . Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).Supplied in robust oil resistant case.3/8in square drive.Range 20 to 100 Nm / 15 to 75 ft.lb
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4002 Adjustable Wrench has the following specifications: Length: 150mm (6 inch).Capacity: 24mm.Capacity AF: 15/16 inch.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4003 Adjustable Wrench has the following specifications: Length: 200mm (8 inch). Capacity: 28mm.Capacity AF: 1.1/2inch.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4006 Adjustable Wrench has the following specifications: Length: 380mm (15 inch). Capacity: 50mm. Capacity AF: 1.15/16 inch.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4007 Adjustable Wrench has the following specifications: Length: 450mm (18 inch). Capacity: 50mm. Capacity AF: 2.3/8 inch.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4008 Adjustable Wrench has the following specifications: Length: 600mm (24 inch). Capacity: 60mm. Capacity AF: 2.3/4 inch.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN5105025 T Handle Hex Driver has the following specifcations:Size: 2.5mm.Short arm length: 12mm.Long arm length: 100mm.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510503 T Handle Hex Driver has the following specifcations:Size: 3.0mm.Short arm length: 12mm.Long arm length: 100mm.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510504 T Handle Hex Driver has the following specifcations:Size: 4.0mm.Short arm length: 12mm.Long arm length: 100mm.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510506 T Handle Hex Driver has the following specifcations:Size: 6.0mm.Short arm length: 15mm.Long arm length: 150mm.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510507 T Handle Hex Driver has the following specifcations:Size: 7.0mm.Short arm length: 15mm.Long arm length: 150mm.
This Teng Tools bit tray is made from stainless steel with a strong, plastic enclosed magnet, and will not damage the car paintwork. Intended for screws, nuts and washers etc, it can be secured on its side and is ideal for working under cars, keeping all bits and nuts together in one place, thus minimising the risk of loss.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510508 T Handle Hex Driver has the following specifcations:Size: 8.0mm.Short arm length: 18mm.Long arm length: 190mm.
The Teng Tools ;581TMI Telescopic Mirror ;is ideal for inspecting the underside of cars and difficult to reach places. It has a fully adjustable head to allow the mirror to be perfectly angled to allow easy vision, and a pocket clip for convenient carriage. Specification Fully Extended Length: 850mm.Mirror ;Diameter: 57mm.
The Teng 581TMP is an extremely powerful telescopic and magnetic pick up tool which extends up to 85cm. It is ideal for picking up components in areas that are difficult to reach and features a handy pocket clip.
The Teng 582MI 3-in-1 ;Telescopic ;Inspection Tool has a maximum extension of 57cm. It combines a very strong magnet with a fully adjustable polished mirror, an etching scribe and is an all in one tool with pocket clip. Specification Fully Extended Length: 570mm.Mirror Diameter: 32mm.Magnet Diameter: 6mm.
