Bahco 306 DIY Hacksaw Frame is a lightweight hacksaw designed for the DIY enthusiast. Adjustable to accept either 250mm (10in) or 300mm (12in) hacksaw blades.
Bahco 396-INS Folding Insulation Saw with super sharp wavy toothing (WT) for a smooth and clean cut. Cuts insulation materials: glass wool, stone wool, etc. Ideal for use when space is limited. Fitted with a strong handle and a soft, non-slip grip for increased comfort and control. There is also a safety lock on the blade that can be used in the opened and closed position. Specification: Blade Length: 175mmFolded Length: 230mm
The DEWALT Rip Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller for efficient and easy pulling.
1 x DEWALT Rip Claw Smooth Face Hammer 567g (20oz).
Designed specially for use by carpenters and mechanics. These stones may be used dry or with oil.These FB24 alumimium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2in.Grade: Fine.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 11mm
The Stanley FatMax® Phillips tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type PhillipsTip Size PH.3Blade Length 150mm (6 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 5/8 x 11/16 WhitworthLength 150mm (6 in)
The Teng ACCSDA1412 Adaptor is for use with standard and impact sockets, etc. on electric and rechargeable screwdrivers (not impact tools). Designed for use with the most common machine fittings. Size: 1/4in Hex to 1/2in SquareLength: 50mm
The Knipex 11 01 160 end wire strippers are made from a good quality special tool steel and are oil hardened for a longer usage life, with better durability than some cutters in its class. The wire strippers feature an adjustable screw for setting the desired diameter of wire to be stripped. This can be any wire diameters up to a maximum of 5mm or 10mm2 cable cross section. Size: 160 mm.Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1102160 are made from special tool steel for strength and durability, this oil hardened wire stripper features a adjustable screw for setting the desired diameter. it cuts wire diameters up to a maximum of 5 mm or 10mm² cable cross section. Comfort Grip Size: 160 mm.
This Knipex 95 31 Series cable shears with 2 component, soft-grip handles. Perfect for copper and aluminium cables, single and multiple wires. Cuts smoothly and cleanly without crushing. Sharp hardened precision knives. Short design with safety guard. Not suitable for wire cables or steel wire. One hand operation using ratchet principle, means little power is required due to optimum transmission ratio. Two stage ratchet drive for easy cutting. Special grade tool steel. Fixed handle with support area for putting down the plier when cutting.1 x Knipex Cable Shears Ratchet Action Multi Component Grip 250mm (10in)
These Knipex external bent circlip pliers are made with a special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions. These Knipex 49 21 series external circlip pliers with 90° bent tips are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 165mm (6 1/2 in).Shaft size: 19 - 60 mm.
Aluminium folding square with 90° and 45° for versatility of job applications.Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc. Durable yet lightweight aluminium construction.Folds into a single length for easy storage. Size: 48 x 48 x 68in (122 x 122 x 172cm)
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley Yellow Long Aviation Snip Straight Cut 300mm
The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface.Type - Parallel Tip Size 2.5mmBlade Length 50mm (2 in)
Stanley Essential Screwdrivers have bars made from Chrome Vanadium Steel, which resists bending and snapping. The handles are made from Polypropylene, with TPR overlay for increased comfort and reduced fatigue. Increased torque can be applied by using another bar through the hole at the top of each handle. This set of 12 contains the following: 2 x Phillips: PH1 x 75mm and PH2 x 100mm.2 x Pozidriv: PZ1 x 100mm and PZ2 x 100mm.3 x Flared Slotted: 5.5 x 100mm, 6.5 x 150mm and 8 x 175mm.2 x Parallel Slotted: 4 x 100mm and 5.5 x 100mm.3 x TORX: TX15 x 100mm, TX20 x 100mm, TX25 x 100mm.
This Stanley FatMax® Moulding Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim reducing material damage. The non-slip grip provides increased leverage.
Stanley FatMax® I-Beam Level has solid-block vials to provide an accuracy of 1.0mm/m in eight orientations. Plus every FatMax level comes with a lifetime accuracy warranty. It is 2 x stronger than other Stanley levels thanks to its unique reinforced box-beam construction. Lightweight body and rule scale for ease of marking out, also a handgrip make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. The 3 vials are magnified for improved all round visibility with shock absorbing end caps protect the level even if it's dropped.Length 1200mm (48 in)
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 8.0mmBlade Length 175mm (7 in)
Markal Dura-Ink are permanent, smear and water resistant heavy-duty felt tip markers with versatile bullet (15 and 55) and chisel tips (25), and are used in a wide variety of industrial applications. They mark on variety of surfaces inculding metal, wood, plastic, glass, rubber, cardboard, paper etc.Tub of 48
The RIDGID Heavy-Duty Pipe Cutter has an extra-long shank that protects the adjustment threads and an extra-large handle for quick, easy adjustment. Provides a fast, clean cut on metallic pipes such as copper. Can be converted to 3-wheel cutter by replacing rollers with cutter wheel. Model 3-S has a second handle making two-man leverage possible on large pipe sizes.RIDGID 2-A Heavy-Duty Pipe Cutter Capacity: 3-50mm (1/8 - 2in).Weight: 3.2kg.
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.Specification: Size: 250mm (10in)Capacity: 40mm (1.1/2in)Weight: 0.8kg
The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.Specification: Size: 350mm (14in)Pipe capacity: 50mm (2in)
The Faithfull open socket Irish shovel pressed from high-quality steel and fitted with a graded wooden shaft. Blade: 340 x 250mm (14 x 9in).Shaft: 1370mm (54in).
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Large T Block Combi Deadblow Hammer 577g (1.2lb)
Starrett's popular precision External Micrometer is furnished with ratchet stop, lock nut and carbide measuring faces. Rigid one piece steel frame, ribbed for extra strength and tapered for use in narrow slots. Features Starrett's satin chrome finish for no glare and rust resistance.The Starrett 436.1XRL-2 Outside Micrometer has the following specification: Size: 1-2in.Graduation: 0.001in.
These Faithfull Hexagon Sockets are professional, high quality metric sockets, forged from chrome vanadium steel which is hardened, tempered and satin chrome plated for corrosion protection. 1/2 inch square drive is the most popular drive size used in the UK and Ireland, due to its strength and durability. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.The FAISOC1223 Hexagon Socket has the following specifications: Drive: 1/2 inch square. Size: 23mm Hexagon.
The Roughneck Trenching Tamper has a reinforced cast iron head with a perfectly flat face. They have strong but lightweight fibreglass handles with soft cushion grip for comfort.This Roughneck Earth Rammer (Tamper) has the following specification: Head Weight: 2.6kg (5.7lb).Head Size: 100 x 250mm (4 x 10in).Handle Length: 1.53m (60in).
The Roughneck Gorilla™ Striking Bar is an industrial grade, multifunction demolition bar and hammer. It is manufactured from industrial grade steel, with an I-beam shape. It is drop forged, hardened and tempered for strength and is powder coated with polished tips. The striking bar features an extra-long prying claw which allows the bar to be driven deeper underneath a work piece and lift extra heavy boxes or objects. It has an anvil neck which allows hammering the claw in tight places, and its prying claw has a built-in nail puller. Ideal for tough demolition or aligning work.
The Roughneck R18C Hardpoint Laminate Cutting Saw has triple ground teeth for faster cutting. The teeth have been heat treated to provide a longer lasting cutting edge. Made from thick, premium grade steel for rigidity. The saw is fitted with a double injected, soft grip handle for comfort and hand protection. The handle is shaped to allow 90° and 45° markings. Suitable for cutting all types of flooring such as solid, engineered and laminate wood. Normal wear and tear of the blade is not covered by the 10 year guarantee. Specification: Length: 450mm (18in)Teeth: 9TPI
Monument pipe cutter wheels are made from high quality, heat treated steels.The Monument MON301 fits Monument 300 Pipe Cutters. Pack colour: Orange (Packs are colour coded according to use).Pack of 1.
The Lufkin Frame Tape has a unique pistol grip compact design with a smooth wind-in mechanism which fits into a tool chest. The steel blade is graduated with both metric and imperial measurements and will not stretch.The Lufkin FT30CME Frame Tape has both metric and imperial measurements. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II
The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all around and will resist temperatures up to 600°C.The Monument 2363L OMAT® Soldering Mat has the following specifications: Size: 150mm² (6in²).Pipe Capacity: 15-22mm.
