The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.1 x Footprint 1860 Grooved Plugging Chisel
This Kent & Stowe Hand Border Fork is ideal for use on raised beds and backs of borders. It is suitable for weeding, planting and cultivating. It is lightweight for ease of use. The handle is made from beautiful FSC® approved ash wood, that has been tapered for comfort. The fork has been hand crafted and offers traditional quality. Length: 60cmThis Kent & Stowe Hand Border Fork has a head made from carbon steel which offers strength and durability. Comes with a 10 Year Guarantee.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 22 x 23mm Length 125mm(5 in)
These Roughneck Traditional Wrecking Bars are made from drop-forged alloy steel, hardened and tempered steel and with polished tips and hexagonal shank.1 x Roughneck Wrecking Bar 450mm (18in)
The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips. Ideal for aligning bolt holes during steel construction.1 x Roughneck Black Aligning Bar 610mm (24in)
Stubby (non ratchet) interchangeable screwdriver with a selection of popular bit sizes.Bi-material handle provides extra grip.Magnetic bit-retention to prevent lost bits.Secure handle bit holder.Accepts standard 1/4in hex screwdriver bits.
Stanley 158501 FatMax® Interchangeable Nail Set with two nail set sizes (1/32in and 1/16in). Bi-material grip for comfort and reduced slipping. 1/4in locking system accepts standard screwdriver bits.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 250mm (10in) files.
Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.Size: 400 mm x 80mm.For 5-10Kg.
A high-quality large Plasterer's Finishing Trowel. The blade is manufactured from stainless steel and is suitable for use with all types of plaster. Fitted with a comfortable soft grip handle to help reduce fatigue and offer excellent durability.Plasterer's Trowel Stainless Steel Soft Grip Handle 11in x 4.3/4in
Fisher steel rule with satin chrome finish and photo etched markings, subdivided in mm, and 10th, 16th, 20th, 32nd, 64th.Figured 10mm, Inches. Double sided except the 2m/72in which is single sided.Size 150mm (6 in)Width 15mm.English and metric markings
The Stanley S160 Stud Sensor detects wood studs up to 25mm in depth and metal studs up to 38mm in depth. It also detects the presence of AC live wire within a 15-45cm radius and up to 50mm depth. Single button for simple operation. An audible alert provides clear notification of stud detection whilst directional LED lights provide visual guidance to stud location. Auto-calibration helps to avoid missed studs due to incorrect initial calibration. With a slim profile design for easy storage and portability. A centre marking channel allows for accurate stud markings. Ideal for locating studs to enable tasks such as TV mounting, hanging pictures and shelves. Specification: Max. Detection Depth: Wood Stud 25mm, Metal Stud 38mmInput Power: 2 x AAA batteries (supplied)
The ITL Insulated Junior Hacksaw with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in). Comes with a 150mm (6in) 25tpi Blade.
This Kent & Stowe Hand Transplanting Trowel is ideal for use on borders and raised beds. It is suitable for planting bulbs and seedlings. It has a useful depth guide marked in inches and centimetres etched on the blade. The handle is made from beautiful FSC® approved ash wood, that has been tapered for comfort. The trowel has been hand crafted and offers traditional quality. Length: 32.5cmThis Kent & Stowe Hand Transplanting Trowel has a head made from stainless steel which offers excellent corrosion resistance and long-lasting performance. Comes with a 15 Year Guarantee.
Melco Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. The tubular box spanner is manufactured from bright plated steel and is able to accommodate a tommy bar.The Melco TA8 A/F Box Spanner is made with 3mm steel and has the following specification: Size: 9/16 x 5/8in.Length: 125mm (5in).
The MON2116N cleans and deburrs 4 different sizes of plastic waste pipe, it is a high quality metal square with each side de-burring a different size of plastic pipe.Will deburr these sizes: 19mm (3/4in), 32mm (1.1/4in), 38mm (1.1/2in) and 50mm (2in). Includes a handy hanging hole and is made in Britain.
This FatMax® pullsaw has a double sided blade for convenient cutting from the left or the right.A flexible blade enables the flush cutting of plugs and dowels as well as precise cutting such as dovetails, small joints and cut-offs. The soft grip handle gives comfort and support during use. 23 teeth per inch - cuts quickly and cleanly on the pull stroke. Blade Length: 125mm (5in).
The Stanley FatMax® Hardened and tempered blade for durability and long life. Moulded handle combining high impact plastic and soft touch inserts for improved comfort and control. Large smooth end pad to facilitate pushing and twisting blade through plasterboard. Sharp point for piercing board. Aggressive triple bevel teeth for a faster cleaner cut. Blade Length: 150mm (6in).Teeth 7 tpi.
The Stanley 0-68-010 Multibit Ratchet Screwdriver features a patented bit storage system for ease of visibility, access and security. It also has a spring loaded, hard wearing, ball bearing indexing mechanism for quick and easy access. The magnetic bit holder provides a quick, secure changeover of standard 1/4in bits and a top quality patented, 3-position, audible, ratcheting mechanism (forward, reverse and fixed) for life long efficiency. Stanley have used the most up to date materials in their screwdrivers. The tri-lobular, bi-material handle with textured finish will give users maximum torque on any type of screw with the minimum of effort. The screwdriver is supplied in a unique holder which contains 4 bits in addition to the 6 bits held in the screwdrivers' integral storage magazine. In total, it is supplied with 10 bits to suit a variety of purposes. Contains: 3 x 25mm Phillips Bits: PH1, PH2(2). 3 x 25mm Pozidriv Bits: PZ1, PZ2(2). 2 x 25mm Slotted Bits: 3mm, 6mm. 2 x 25mm Torx® Bits: TX10, TX15.
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley ;Red Offset Aviation Snip Left Cut 250mm (10in)
The Stanley FatMax® Tenon Back saws have the following features:Reinforced back for extra rigidity makes a straighter cut; Handle screwed to blade for extra strength;Finger rest - ergonomic design, useful for extra control when starting a cut;Triple edged teeth cut on both push and pull strokes for ease of cutting;Induction hardened teeth; 45° and 90° angle quick reference points;Bi-material handle for improved grip and comfort.The Stanley 2-17-199 FatMax® Tenon / Back saw has triple edged induction hardened teeth with a durable bi-material handle for grip. It cuts on both the push & pull stroke meaning it cuts even quicker, the handle has built in 45° and 90° angle quick reference points and has the following specifications: Length 300mm (12in)Teeth 11tpi
The Stanley Dual Colour Quick Square is made from extra thick ABS plastic that can withstand heavy-duty use. The large base provides a strong grip on materials, and the molded-in, contrasting colour graduations improve readability. These wrapping graduations ensure greater accuracy. The quick square is a versatile tool and is also ideal for use as a saw guide.Size: 300mm (12in).
The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).
