The Roughneck Gorilla Cold Chisel is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting.
The Roughneck Roofing Demolition & Lifting Bar is ideal when working overhead, such as taking down ceilings, ripping off roof laths and working in confined spaces. The tusks are hardened and tempered and the heel rounded to distribute pressure over a larger area. The side by side chisel ends can be rested on joists for added leverage when removing roof lathes, taking down ceilings and general demolition work. Saves time, energy and increases safety reducing the chance of injury.
The Knipex Wire Stripping Tool is for stripping outer sheath, shield, and insulation in a single process. It has an adjustable stripping blade for data cable, and two stripping blades for cutting and stripping telephone ribbon cable (4P/6P/8P) in a single operation. Specification: Cable Type: RG 59, RG 6, RG 7, RG 11.Dimensions: 125 x 120 x 23mm.
Monument White Tallow is the best quality, hard tallow used as a lubricant when threading conduit pipe and when pulling electric cables through conduit.1 x Monument 261P White Tallow 275g Tub.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.The STANLEY CONTROL-LOCK Pocket Tape has metric graduations only.A double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 5 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Important, this pocket tape has metric graduations only. Specifications: Blade Length: 5m.Blade Width: 25mm.Accuracy: EC Class II.
The Faithfull general purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high impact heavy applications.Fitted with a fibreglass handle, with a rubber grip.Manufactured in accordance with BS876.1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4lb).
Monument Master Plunger for removing blockages from pipes by building up pressure. With patented bellows to give more displacement than traditional force cups. Easily cleaned and has a removable handle.This plunger is ideal for bath and sink waste pipes. Size: 125mm (5 in).
The Lufkin Unilok Pocket Tape has a yellow clad abrasion resistant blade with 2 colour, easy to read markings in metric and imperial graduations. With a self-adjusting end hook. It has a lightweight high strength case with removable belt clip and a toggle lock that holds the blade securely at any length. Built-in shock absorber cushions blade return.This Lufkin YU835CME Unilok Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The IRWIN® Quick-Grip® Micro Clamps feature a patented ratcheting mechanism that provides variable clamping pressure. The quick-release trigger allows for fast and easy positioning and release, making this the ideal clamp for jobs in the workshop, house and garden. They have specially designed jaws with non-marking pads that can hold onto odd-shaped work pieces. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.
ROCOL LEAK DETECTOR Spray is a specially formulated aerosol for the rapid detection of positive pressure gas leaks. Tested to ensure plastic and copper pipe compatibility, and suitable for use with most positive pressure gases. 360° valve for use in difficult to reach areas. Meets the product specification given in IGE/UP//1B Edition 2. Meets oxygen compatibility requirements of MIL-PRF25567E. Size: 300ml.
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 12.0mmBlade Length 250mm (10 in)
The Stabila 81S Torpedo Level has a strong cast aluminium T profile making it easy to hold. The particularly slender trapezoidal bevelled shape makes it suitable for working in cramped spaces. The die-cast frame has 1 milled measuring face and protecting noses to prevent damage to milled face. Additional magnets mounted in the milled measuring surface securely hold this level to scaffolding or beams. 2 Vials: 1 plumb & 1 horizontal.Accuracy: Normal Position: 0.029°=0.5mm/m.Accuracy: Overhead Position: 0.043°=0.75mm/m. Type 81SREM has rare earth magnets (five times stronger).The Stabila 81S REM Rare Earth Magnetic Torpedo Level is supplied loose.
The Stabila 81S Torpedo Level has a strong cast aluminium T profile making it easy to hold. The particularly slender trapezoidal bevelled shape makes it suitable for working in cramped spaces. The die-cast frame has 1 milled measuring face and protecting noses to prevent damage to milled face. Additional magnets mounted in the milled measuring surface securely hold this level to scaffolding or beams. 2 Vials: 1 plumb & 1 horizontal.Accuracy: Normal Position: 0.029°=0.5mm/m.Accuracy: Overhead Position: 0.043°=0.75mm/m. Type 81SREM has rare earth magnets (five times stronger).The Stabila 81S-REM Rare Earth Magnetic Torpedo Level is supplied with a holster
The Roughneck Gorilla Block Buster™ Bolster is a unique tool designed to cut blocks and bricks quickly, safely and accurately. It can also be used for removing wall or floor tiles, outside wall rendering as well as chasing out channels in block work for recessed pipes and cables. The Gorilla Block Buster™ has a blade made from hardened, tempered and ground polished, powder-coated steel. It has a large 30mm striking anvil and the handle is angled at 90° from the striking area to keep your hand well away from the hammer. The blade has been laser etched with 100mm lines for easy measuring. For comfort, the Gorilla Block Buster™ has a triple injected, soft grip handle. Blade width: 230mm
The Fiskars PowerGear trade; Aviation Snips are made with forged, heat-treated steel blades. PowerGear trade; technology; leverage-enhancing gears give you over 40% more power, especially during the toughest part of the cut. Blade tangs extend to the handles for improved strength. The ergonomic handle features SoftGrip and strategic texturing for added comfort and control. Its EasyAction trade; feature opens the handle automatically to help reduce hand fatigue. Ideal for cutting a range of heavy-duty materials, including sheet metal, ductwork, drywall corners, metal studs, siding, soffit, fascia, drip edge, gutters and more. Specifications: Length: 250mm (10in).Cut Length: 38mm.Cutting Capacity: Cuts up to 18-gauge cold-rolled steel (1.214mm) or 22-gauge stainless steel (0.7937mm). These Fiskars PowerGear trade; Aviation Snips have the following specifications: Cut Type: Straight.Length: 250mm (10in).Cut Length: 38mm.Cutting Capacity: Cuts up to 18-gauge cold-rolled steel (1.214mm) or 22-gauge stainless steel (0.7937mm).
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.1kg (2.1/2 lb)
The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box.The MAW10015BI calipers have the following specifications: Range: 0-150mm (0-6in).Resolution: 0.02mm (0.001in).
The Stanley FatMax® Tenon Back saws have the following features:Reinforced back for extra rigidity makes a straighter cut; Handle screwed to blade for extra strength;Finger rest - ergonomic design, useful for extra control when starting a cut;Triple edged teeth cut on both push and pull strokes for ease of cutting;Induction hardened teeth; 45° and 90° angle quick reference points;Bi-material handle for improved grip and comfort.The Stanley STA217202 FatMax® Tenon / Back saw comes in the following:Size: 360mm (14 inch)Teeth: 13 tpi
This Hultafors PY30/15 Pacer Tape has metric and imperial measurements. Specification: Blade Length: 30m/100ft.Blade Width: 13mm.Accuracy: EC Class II.
Bahco Slip Joint Pliers have been developed according to the scientific ERGO™ process with outstanding jaw opening and depth with speedy one hand setting. By pressing the unique thumb operated button the parallel jaws can be adjusted in 9 to 13 positions depending on model. Plastic coated handles for maximum grip and comfort. Parallel specially hardened jaws, with both flat and pipe grip jaws and phosphated and oil-impregnated finish.Length: 250mm (10 in).Jaw opening: 45mm (1 3/4in).Weight: 350g.
The Faithfull multi purpose and versatile 10 mm diameter TCT routing tool for use with mains operated power drills with 13mm capacity chuck. Ideal for removal of old and soft mortar between brick courses prior to repointing. Can also be used for creating channels or grooves in plaster or cement skimmed walls when runs of electrical cable or pipework need to be recessed.Size 10mm
This Kent & Stowe Hand Potting Scoop is ideal for scooping compost into pots and troughs and for transferring soils and seeds. Fitted with a stainless steel head that offers excellent corrosion resistance and long-lasting performance. The handle is made from beautiful FSC® approved ash wood, that has been tapered for comfort. It has been hand crafted and offers traditional quality. Comes with a 15 Year Guarantee.
The Roughneck Heavy-Duty Pull Bar is a very well designed and strong tool it has a large flange to rest against the panel and a striking face protected by a nylon cap. Underneath is fully covered by soft felt to protect wood surfaces from scratches, scuffs or other damage. Bevelled end tip to allow prying for either lifting panels or pulling the last row tighter together.
The Knipex DP50 Plastic Pipe Cutter will cut and chamfer all common domestic plastic drain pipes up to Ø 50mm, in a single operation. Its reversible high-quality ball-bearing steel blade can be easily replaced without tools. The DP50 provides a clean cut with no readjusting or deburring required, reducing potential blockages or damages of the seals. The blade is spring loaded, no inconvenient readjusting while cutting, and its durable housing is made of glass fibre reinforced plastic. Supplied with an exchangeable blade, with two cutting edges, so reversable when showing signs of wear. Specification: High Temperature & Plastic Pipes: Ø 32, 40 or 50mm.Max. Wall Thicknesses: 2.4mm.Min. Length of Pipe: 10mm.
1 x Moore & Wright 4004 Engineer's Square Grade B 100mm (4in) in Retail Packaging. Specifications: Blade Size: 130.2 x 25.4mm.Stock Size: 76.2 x 25.4mm.Inner Working: 57.0 x 104.8mm.
Bahco 331-15 Bowsaw is a small handy bowsaw for all-round use. The pointed nose makes the saw well suited for use in tight spaces and is ideal for pruning and roofing work. Supplied with either a 23 series blade for cutting green wood or a 51 series blade for cutting dry wood.The Bahco 331-21-51-KP Bowsaw is supplied with a peg tooth blade for dry cutting. Supplied with a FREE 23/21 raker tooth blade for wet cutting.
The Wiss M-1R Metalmaster® Compound Snips Left Hand/Straight Cutting have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel and are fitted with comfortable colour coded vinyl grips. Can cut straight or left hand. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.These Wiss Metalmaster® Compound Snips have the following specification: Cutting Type: Left Hand/Straight Cut.Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 3000mm (10 ft)Section: 93 x 25mm (3 5/8 x 1 in)
