All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 89 mm (3.1/2in).Weight : 1.1 kg (40oz).Face : 89 mm.
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 4 Thor split head hammers .Face diameter 50mm (2 in)
The Faithfull Carvers Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.
The Roughneck Gorilla V-Series Double-Ended Scutch Hammer accepts both scutch combs and chisels, making it ideal for stone and masonry dressing. Manufactured from drop-forged, hardened and tempered steel for extreme strength and durability. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
The Roughneck Gorilla V-Series Slater's Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The pick end enables holes to be punched in slates and an integrated nail puller allows nails to be removed with ease. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 2 Thor split head hammers. Face diameter: 38 mm (1 1/2 in).
The Stanley FatMax® Antivibe All Steel Curved Claw Hammer has a one-piece forged construction for durability and balance. With an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented Anti-Vibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.1kg (2.1/2 lb)
Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The Faithfull Welders Chipping Hammer has an all steel construction that makes it both solid and strong. It features a striking head with a sharp conical point and a flat chisel bevelled end. The unique helical barrel spring handle helps to prevent kickback and reduces resonance, helping to avoid fatigue during long periods of use. The hammer is fitted with an integral hanging hook for easy storage. Length: 290mm.
Claw Hammer with a drop forged, semi-polished, heat treated steel head, a full size round face for accurate striking, and a full claw for maximum pulling power. Blue cushioned rubber grip for comfort.Weight 450g (1lb).
Roughneck Club Hammer with a fibreglass handle manufactured from drop forged alloy steel hardened and tempered with a black painted head with polished faces and chamfered edges, epoxy bonded for added strength. Solid core fibreglass handle with polypropylene jacket. Unique treble injected TPR soft grip handle for comfort during use and reduced fatigue.Weight: 1130g (2 1/2lb).
The proper tool for driving hardened nails and cold chisels.One-piece steel hammer with Estwing's world famous blue shock reduction nylon vinyl grip.Weight: 1810g (4lb).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Cast iron head. Diameter 63mm (2 1/2 in).Weight 2200g (5 1/2lb).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 2.Diameter: 38mm (1 1/2in).Weight: 960g (2lb).
Faithfull general purpose sledge hammer for builders and contractors.Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection. Manufactured in accordance with BS876.Weight: 4530g (10lb)
The Roughneck High Velocity Turbo Hammer has a one-piece forged handle construction offering maximum strength and safety. The hammer's special head design and triple injected air cushion grip reduce shock and the transmission of vibrations to the hand and provide a comfortable grip. The magnetic nail holder makes starting easy, especially in hard to reach places. The narrow long shank allows users to strike more accurately at an increased speed. This increased velocity results in higher striking forces at the point of impact and in turn, greater overall tool effectiveness.
The Thor hardwood mallets have a laminated cylindrical compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. The mallets have a conical self-locking handle and come in 3 different weights. These have an excellent resistance to impact and will give a long service life, they are suitable for hot work applications. Typical uses for these mallets include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.Weight: 300g (11oz).Diameter: 50 mm (2in).
Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces. Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.
Estwing E239 Roofers pick hammer is designed for the roofing trade. It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised head for starting nails accurately. The hammer is made from solid steel with a genuine leather grip. Made in the USA.Smooth faceLeather gripWeight 620g (1lb 6oz)
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 570g (1 1/4 lb).
The Estwing Surestrike straight claw framing hammer has a forged solid steel head and a genuine top grade hickory handle. Weight 700g (1lb 9oz)Milled face
These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA from high quality steel.The ESTE619S Ultra Framing Hammer has the following specifications: Weight: 540g (19oz).Handle length: 349mm (15.1/2in).
The Estwing E322 Straight Claw Hammer has a one-piece forged steel construction, with Estwing's world famous blue shock reduction nylon vinyl grip. Offering comfort and durability whilst reducing vibrations caused by impact. This hammer is designed for framing work with its straight claw and longer handle. Made in the USA from high quality steel.Weight 680g (1 1/2lb).
The Estwing E3 series curved claw hammers have a vinyl grip made from liquid vinyl bonded on to the shaft during production, which offers the utmost in both comfort and durability, while reducing vibrations caused by impact. The conventional carpenter's curved claw hammer offers unsurpassed balance and temper. Made in the USA from high-quality steel.Weight 570g (20oz)
The Hultafors TB600 Bricklayer's Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight: 680g (1 1/2lb).
The Estwing E322P square section rock pick hammer has a flat face at one end and a pick at the other.Used by slaters or geologists it has a liquid vinyl grip handle bonded on to the shaft during production for added grip and comfort. These Estwing high quality chisel geological hammer picks use the strongest steel which is forged in one-piece. The strongest known construction of its type. A tool designed for the geologist when working with rock or rubble. Weight: 620g (1 lb 6oz)
The proper tool for driving hardened nails and cold chisels.One-piece steel hammer with Estwing's world famous blue shock reduction nylon vinyl grip.Weight: 1360g (3lb).
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 680g (1 1/2lb)
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 570g (1 1/4lb)