The AquaStop Plus Connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden by stopping the water flow, thus preventing water being wasted. All internal parts are made from ultra tough engineering plastics for a long leak free life and the connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet due to the twin soft touch pads and the hose remains securely connected via the barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious flexible hose-tail on the nut. This fitting is best used at the gun end of the hosepipe. Suitable for use with all 19 mm / 3/4in and 15 mm / 5/8in hose.
Hozelock Quick Connect hose connectors with all internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, due to a triple locking system and the sleeve is easy to use even when wet because of the twin soft-touch pads. The hose is firmly connected by barbs that connect with the inside and outside of the hose. Hose kinking, swelling and leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut. Suitable for use with all 15mm (5/8 inch) and 19mm (3/4 inch) hoses.
The Aquastop Plus Connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden by stopping the water flow, thus preventing water being wasted. All internal parts are made from ultra tough engineering plastics for a long leak free life and the connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet due to the twin soft touch pads and the hose remains securely connected via the barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut. This fitting is best used at the gun end of the hosepipe. Suitable for use with all 12.5mm (1/2in) and 15mm (5/8in) hose diameters.1 x HOZ2055 2055 AquaStop Hose Connector for 12.5-15 mm (1/2 in & 5/8 in) Hose
Hozelock quick connect hose connectors where all internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, due to a triple locking system, and the sleeve is easy to use even when wet because of the twin soft-touch pads. The hose is firmly connected thanks to barbs that connect with the inside and outside of the hose. Hose kinking, swelling and leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut. Suitable for use with all 12.5 mm (1/2 inch) and 15 mm (5/8 inch) hoses.2 x Hozelock 2050 Hose End Connector Plus for 12.5-15mm (1/2-5/8in) Hose
Hozelock quick connect hose connectors where all internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, due to a triple locking system, and the sleeve is easy to use even when wet because of the twin soft-touch pads. The hose is firmly connected thanks to barbs that connect with the inside and outside of the hose. Hose kinking, swelling and leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut. Suitable for use with all 12.5 mm (1/2 inch) and 15 mm (5/8 inch) hoses.1 x HOZ2050 2050 Hose End Connector for 12.5-15 mm (1/2 in & 5/8 in) Hose
Hozelock Pro-Metal double ended male connector allows two lengths of hose equipped with female connectors to be joined together. It is made from nickel plated brass, which ensures a strong and durable connection. Scratch and frost resistant, the Pro Metal Double Male Connector comes with a 3 year guarantee.
This Hozelock 3/4in BSP Pro Metal tap connector suitable for use with 95% of all outdoor taps. Includes a 1/2in adaptor for older taps. Produced from nickel plated brass, ensuring that the connector is strong, durable, scratch resistant and frost damage free. The connector securely attaches to the outdoor tap, and converts it to the Hozelock quick connect system.
Hozelock Water Butt treatment is a safe, non-toxic treatment for stored water. The liquid prevents unpleasant odours and unsightly scum whilst helping to keep the water free from slime and algae. Treats 6,400 litres of water. Size : 500ml.
The HiKOKI RB36DA Brushless Blower produces a higher air volume than petrol blowers. It has 4 power settings plus a turbo mode. The compact, lightweight body makes it easy to handle. RB36DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion BatteryRB36DA/J4Z: Bare Unit, No Battery or Charger Specification: Air Speed: 0-24,000/min.Air Flow: 0-680m³/h.Overall Length: 940mmWeight: 2.8kgThe HiKOKI RB36DA/JLZ Brushless Blower is supplied with: 1 x 18/36V 5.0/2.5Ah Li-ion Battery*1 x UC18YSL3 Charger *Multi Volt batteries for high power output similar to mains powered tools. Batteries are compatible with existing Hitachi/HiKOKI 18V tools.
The HiKOKI RB36DA Brushless Blower produces a higher air volume than petrol blowers. It has 4 power settings plus a turbo mode. The compact, lightweight body makes it easy to handle. RB36DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion BatteryRB36DA/J4Z: Bare Unit, No Battery or Charger Specification: Air Speed: 0-24,000/min.Air Flow: 0-680m³/h.Overall Length: 940mmWeight: 2.8kgThe HiKOKI RB36DA/J4Z Brushless Blower is supplied as a bare unit. Batteries are NOT included.
The Fiskars 139950 Xact™ Weed Puller has been designed for removing any root weeds ergonomically and effortlessly, thanks to it's unique ergonomic grip. Its deep reaching stainless steel jaws grab the root from multiple directions and a long shaft means no digging or bending is required, reducing strain on the body. Offers easy and effective weeding in 3 Steps: 1. Push the weed puller blades around the weed. 2. Press the pedal with your foot to the ground. Then remove your foot and pull the shaft. 3. Pull the weeder up, eject and discard the weed. Length: 1000mm.Head Width: 30mm.Weight: 950g.
The Fiskars FSK137220 Premium Planters™ Cultivator, with its hooked tines, is the perfect tool for aerating and loosening soil and preparing a garden bed. It has robust, corrosion resistant stainless steel hooked prongs that can till and penetrate even the hardest soil. It has a durable and lightweight FiberComp™ body and the hanging hole makes for easy storage after cultivating work is done. Length: 326mm.Width: 68mm.Weight: 100g.
The Fiskars FSK137210 Premium Planters™ Transplanter works very well in hard ground and its narrow construction makes it perfect for use in narrow bed layouts and on balconies. The robust construction is complemented by a corrosion resistant stainless steel blade with a sharp blade edge for better penetration into the soil. The durable and lightweight FiberComp™ body makes it easy to handle and the hanging hole makes for easy storage after your planting work is done. Length: 350mm.Width: 68mm.Weight: 100g.
The Fiskars FSK137200 Premium Planters™ Trowel is the ideal tool for planting and transplanting in hard ground. Its robust construction makes it a perfect nursery tool with its corrosion resistant stainless steel blade. This trowel has a sharp blade edge for better penetration into even the most resistant soil. To better aid handling performance, the body is made from durable and lightweight FiberComp™. A hanging hole is incorporated in the handle for easy storage. Length: 320mm.Width: 68mm.Weight: 100g.
The Fiskars 135715 Solid™ Soil Rake has hardened carbon steel blades for preparing planting beds, smoothing down soil and other general gardening tasks like raking branches or spreading mulch. The rounded aluminium shaft makes it extremely durable, and lightweight. Easy to store thanks to integrated hanging holes. The Fiskars Solid™ Range are all-purpose tools constructed for durability, that won’t let you down. Specification Length: 1540mm.Head Width: 358mm.Weight: 670g.
The Fiskars 135714 Solid™ Cultivator has hardened carbon steel prongs for loosening and tilling the soil before planting. The rounded aluminium shaft makes it extremely durable, and lightweight. Easy to store thanks to intergrated hanging holes. The Fiskars Solid™ Range are all-purpose tools constructed for durability, that won’t let you down. Specification Length: 1640mm.Head Width: 117mm.Weight: 660g.
The Fiskars Xtract Garden Pruning Saw efficiently cuts fresh wood. It has a handy belt clip that retracts when in use, and a finger guard to protect the fingers from sliding onto the blade. The SoftGrip™ handle ensures a safe grip. Cuts on the pull stroke.The Fiskars FSK123880 SW75 Garden Pruning Saw has the following specifications: Blade length: 225mm.Working blade length: 220cm.Maximum cutting diameter: 120mm.Total length: 330mm.Weight: 230g.
The Fiskars Xtract Garden Pruning Saw efficiently cuts fresh wood. It has a handy belt clip that retracts when in use, and a finger guard to protect the fingers from sliding onto the blade. The SoftGrip™ handle ensures a safe grip. Cuts on the pull stroke.The Fiskars FSK123870 SW73 Garden Pruning Saw has the following specifications:Blade length: 160mm.Working blade length: 120cm.Maximum cutting diameter: 70mm.Total length: 223mm.Weight: 130g.
The Fiskars Fixed Blade Saw SW84 is perfect for cutting in wood up to Ø150mm, thanks to its highly efficient tooth profile enabling fast and accurate sawing. It is extremely comfortable to use thanks to its SoftGrip™ ergonomic curved handle and has a fixed blade design that cuts on the pull stroke. Blade Length: 330mm.
The Fiskars XS-X7 Camping Axe is great for universal cutting tasks and is suitable for campers, hikers, and as a companion for outdoor activities. The blade has a thin, wide edge that ensures a clean, easy cut through fresh and resinous wood. The new (patent pending) 3D grip improves user safety by offering greater control in use. It also helps to deliver more power, due to less focus on holding the axe. The ultra-light and durable FiberComp™ handle minimises fatigue and makes the axe virtually unbreakable. This chopping axe features the right balance between the head and shaft for safe, comfortable and efficient use. The axe also has an optimal anti-shock structure, while the hooked end of the handle prevents the axe from slipping. New 25 Year Warranty. Fiskars offer the best in class, in Europe, for premium axes. To speed up the claim process, your receipt acts as a certificate, upon registering online. Registration also allows you to access a guide on use, tips & tricks online.
The Fiskars Xsharp™ Axe and Knife Sharpener acts as two sharpeners in one. The ceramic grind stone has clearly indicated cutting grooves for either axes or knives. The sharpener has an optimised sharpening angle for Fiskars blades with an easy-to-use mechanism. It is compact in size for convenient portability. Length: 165mm.
The Fiskars UP53 Anvil Tree Pruner has a long reach shaft that makes hard to reach garden tasks accessible from a safe standing position. The anvil cutting action is ideal for cutting dry and hard wood. It has a vertical cutting reach of approximately 3.5 meters and an adjustable cutting angle up to 26°. Specification Cutting Capacity: 32mm.Vertical Cutting Reach: 3.5m.Length: 1610mm.Weight: 770g.
The Fiskars FSK114800 HS86 SmartFit™ Telescopic Hedge Shears are ideal for trimming both high and low hedges due to the telescopic handles. Length: 675 - 925mm.Weight: 1.19kg.
Fiskars HS72 PowerGear™ Hedge Shears are suitable for many different cutting needs in the garden; hedge trimming, trimming around bushes and edges etc. The unique gear mechanism and the lever system gives three times the cutting power, making light work of the toughest challenges. The lightweight and sleek design makes cutting easy. The handles are made of tough fibreglass reinforced polyamide and the grips are made of fibreglass reinforced plastic. The tough stainless steel blades have a PTFE coating on the upper blade for less friction. Length: 570mm.Weight: 630g.
