The Rapid AC300 Spare/Replacement Li-Ion Battery Pack, specially designed for use with the Rapid BGX300 Cordless Glue Gun. The glue gun can now be used while a spare battery is charging which offers more flexibility and performance. The Rapid BGX300 Glue Gun is an innovative, cordless glue gun ideal for decoration, repair, baseboards, light frames and furniture. Specification Battery Capacity: 2.6Ah.Battery Chemistry: Li-Ion.Voltage: 7.2 Volt.
Evostik fast setting, extra strong weatherproof wood adhesive for interior or exterior use.Complies with EN 204 Type D3 - weatherproof, water-resistant wood adhesive.Dries to a clear finish that can be sanded, painted or stained.Suitable for all types of wood.No mess, clog-free nozzle and twist to seal cap.Anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size. 5 litre.
Evo-Stik Reswin W is a fast setting, extra strong wood adhesive is ideal for interior use. Dries to a clear finish that can be sanded, painted or stained. Resin wood glue is suitable for all types of wood and will set stronger than the wood itself. No mess, clog-free nozzle and twist to seal cap, all designed in a handy anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 125ml.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 3X.Adjustment: 60 - 80mm.
Rapid No. 7 precision cut, high-performance galvanised steel flat wire cable staples with rounded crown and a 12mm leg length. Designed for securing low voltage cables up to a maximum of 6mm in diameter. For use in the R36 cable tacker. Length: 12mm, diameter: 6mm. Supplied in a pack of 960.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 6X.Adjustment: 120 - 150mm.
Rapid No. 606 precision cut, narrow crown staples are made from high performance galvanised steel and act like a double brad. They are resin coated for best results when used in wood and are ideal for flooring, partitioning, wallboard and frames.Type: 606 (galvanised)Size: 30mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.
Rapid No. 606 precision cut, narrow crown staples are made from high performance galvanised steel and act like a double brad. They are resin coated for best results when used in wood and are ideal for flooring, partitioning, wallboard and frames.Type: 606 (galvanised)Size: 25mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.
The Loctite 60 Second All Purpose Glue has a colourless, ultra-thick gel formula that prevents dripping and bonds all materials within 60 seconds. Objects are repositionable for up to 40 seconds. It builds up a strength of +100kg/cm2 within 24 hours. The glue will bond to most materials, porous and non-porous, as well as flexible materials and objects exposed to stress. It is ideal for larger applications thanks to its tailored formula and its bigger tube.
Rapid No. 53 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The fine wire makes the fixed staple almost invisible, ideal for fabrics, decoration, small construction and light repair.Type: 53 (galvanised).Size: 14mm leg length.Quantity: 2,500. For use with: Rapid R253, R353, R453, ALU753, ALU853, ALU953, E100, ESN530, BTX530, R553, PS101, PS6-16, Compacta, Hobby Electric
Rapid No. 53 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The fine wire makes the fixed staple almost invisible, ideal for fabrics, decoration, small construction and light repair.Type: 53 (galvanised).Size: 12mm leg length.Quantity: 2,500. For use with: Rapid R253, R353, R453, MS2.1, MS4.1, ALU753, ALU853, ALU953, E100, ESN530, BTX530, R553, PS101, PS6-16, M20, M30, M40, Hobby Tacker Dual, Multitacker, Compacta, Hobby Electric
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21, Rapid R53 and other brands taking the popular 53 staple.Size: 12mm.Pack quantity: 2000.
The Everbuild 502 series All Purpose Weatherproof Wood Adhesive is a high quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.The Everbuild EVBWOODO250 is supplied in a 250ml bottle.
500 series 18 Gauge angled nails for use with:- 0733 Master Nailer, 400EL Pro,0664 Master Nailer, 500EL Pro inclined professional nailers. Angled at 26°.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 5.Adjustment: 90 - 120mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 4X.Adjustment: 85 - 100mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.The Faithfull FAIHC2XSSB Stainless Steel Hose Clip comes in the following:Size: 2X.Adjustment: 45 - 60mm.
Soldering Flux acts as a chemical cleaning agent to remove impurities from joint surfaces when soldering, ensuring a better joint. It has a non-acidic, non-toxic formula, offering fitters the benefits of savings, safety and certainty. WRAS (The Water Regulations Advisory Scheme) approved. Products compliant with this approval are accepted by all water suppliers in the UK.1 x LA-CO Regular Soldering Flux, Size 60g
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 1M.Adjustment: 32 - 45mm.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 6 mm leg length.Quantity: 970. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 10mm leg length.Quantity: 650. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R11, R54, E-TAC, CSN140 and ESN114 tackers.
The RIDGID 1390M Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. It makes clean cuts without damaging the thread.RIDGID 1390M Threaded Rod Cutter Blade Size: 8mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 4.Adjustment: 70 - 90mm
