ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.0 x 16mm.Box quantity: 200.
The Faithfull S-Hooks are made from low carbon steel and zinc plated for resistance to corrosion. The hooks are ideal for attaching accessories to chain when low working loads are involved. These Faithfull S Hooks have the following specifications: ; Diameter: 6mm.Length: 60mm.Inside Eye Diameter: 18mm.Quantity: 6.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 3.2mmLength: Short 6mmGrip range: 1-3mmPack qty: 1000
These MasonMate Zinc PlatedStuds have the following specifications: Size: M16. Length: 190mm. Hole Diameter: 18mm. Fastens up to: 45mm. Min. Hole Depth: 125mm. Box Qty.: 10. The MasonMate Zinc Plated Stud is made from Grade 5.8 Mild Steel and comes complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems. M16 x 190mm (10)
These MasonMate Zinc PlatedStuds have the following specifications: Size: M12. Length: 160mm. Hole Diameter: 14mm. Fastens up to: 35mm. Min. Hole Depth: 110mm. Box Qty.: 10. The MasonMate Zinc Plated Stud is made from Grade 5.8 Mild Steel and comes complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems. M12 x 160mm (10)
These MasonMate Zinc PlatedStuds have the following specifications: Size: M10. Length: 130mm. Hole Diameter: 12mm. Fastens up to: 45mm. Min. Hole Depth: 90mm. Box Qty.: 10. The MasonMate Zinc Plated Stud is made from Grade 5.8 Mild Steel and comes complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems. M10 x 130mm (10)
These MasonMate Type TPF Nylon Plugs have the following specifications: Size: 6 x 37mm. Anchor Hole Size: 6mm. Screw Gauge: 6-8G. Screw Size: 3.5-4.0mm. Min Hole Depth: 50mm. Pack Qty.: 200. The MasonMate Type TPF Nylon Plugs made for use in lightweight, aerated and hollow blockwork giving quicker and greater expansion than standard wall plugs. 6 x 37mm (200)
These MasonMate Type E Nylon Plugs have the following specifications: Size: 6 x 30mm. AnchorHoleSize: 6mm. ScrewGauge: 6-10G. ScrewSize: 3.5-5.0mm. Min Hole Depth: 40mm. Pack Qty.: 300. The MasonMate Type E Nylon Plugs have a rimless design. Ideal for fixing wall lights, shelving and cupboards. Often used with coach screws as satellite fixings. 6 x 30mm (300)
These MasonMate Type E Nylon Plugs have the following specifications: Size: 12 x 60mm. Anchor Hole Size: 12mm. Screw Gauge: 18-24G. Screw Size: 8.0-10.0mm. Min Hole Depth: 75mm. Pack Qty.: 100. The MasonMate Type E Nylon Plugs have a rimless design. Ideal for fixing wall lights, shelving and cupboards. Often used with coach screws as satellite fixings. 12 x 60mm (100)
Box of 50 MasonMate Spring Toggle Wings M6. The MasonMate Spring Toggle Wings are for use with machine screws (NOT supplied). Ideal for ceiling installations. Zinc plated for increased durability. M6 (50)
Box of 50 MasonMate Spring Toggles and Screws M5 x 75mm. The MasonMate Spring Toggles Screws are light-duty fixings for ceiling installations. The wings take high loads due to their wide coverage. Zinc plated for increased durability. M5 x 75mm (50)
Box of 100 MasonMate Nylon Hammer-In Fixing 8 x 80mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 80mm (100)
Box of 100 MasonMate Nylon Hammer-In Fixings 8 x 60mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 60mm (100)
Box of 50 MasonMate Nylon Hammer-In Fixings 8 x 135mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 135mm (50)
Box of 50 MasonMate Nylon Hammer-In Fixings 8 x 120mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 120mm (50)
Box of 100 MasonMate Nylon Hammer-In Fixing 6 x 70mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 6 x 70mm (100)
Box of 50 MasonMate Nylon Frame Fixings 10 x 80mm. The MasonMate Frame Fixings consist of a nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 10 x 80mm (50)
Box of 100 MasonMate Nylon Frame Fixings 8 x 80mm. The MasonMate Frame Fixings consist of a nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 80mm (100)
Box of 100 MasonMate Nylon Frame Fixings 8 x 60mm. The MasonMate Frame Fixings consist of a nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 8 x 60mm (100)
Box of 50 MasonMate Nylon Frame Fixings 10 x 120mm. The MasonMate Frame Fixings consist of a nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 10 x 120mm (50)
Box of 50 MasonMate Metal Frame Anchors 10 x 92mm. The MasonMate All Steel Metal Frame Anchors produced for fixing door and window frames to most building materials. All steel for strength and durability. 10 x 92mm (50)
Box of 100 MasonMate Spring Toggles and Screws M5 x 50mm. The MasonMate Spring Toggles Screws are light-duty fixings for ceiling installations. The wings take high loads due to their wide coverage. Zinc plated for increased durability. M5 x 50mm (100)
These MasonMate Hot Dipped Galvanised Studs have the following specifications: Size: M12. Length: 160mm. Hole Diameter: 14mm. Fastens up to: 35mm. Min. Hole Depth: 110mm. Box Qty.: 10. The MasonMate Hot Dipped Galvanised Stud is made from Grade 5.8 Mild Steel. Complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems. M12 x 160mm (10)
Box of 100 MasonMate Hollow Wall Anchors M5 x 37mm. The MasonMate Hollow Wall Anchors provide a permanent threaded fixing in a hollow wall. Zinc Plated for increased durability. M5 x 37mm (100)
Box of 100 MasonMateHollow Wall Anchors M5 x 65mm. The MasonMate Hollow Wall Anchors provide a permanent threaded fixing in a hollow wall. Zinc Plated for increased durability. M5 x 65mm (100)
Box of 150 MasonMate Nylon Hammer-In Fixings 6 x 40mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 6 x 40mm (150)
Box of 100 MasonMate Nylon Hammer-In Fixing 6 x 60mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 6 x 60mm (100)
These MasonMate Type E Nylon Plugs have the following specifications: Size: 14 x 75mm. Anchor Hole Size: 14mm. Screw Gauge: 24-32G. Screw Size: 10.0-12.0mm. Min Hole Depth: 90mm. Pack Qty.: 50. The MasonMate Type E Nylon Plugs have a rimless design. Ideal for fixing wall lights, shelving and cupboards. Often used with coach screws as satellite fixings. 14 x 75mm (50)
These MasonMate Hot Dipped Galvanised Studs have the following specifications: Size: M16. Length: 190mm. Hole Diameter: 18mm. Fastens up to: 45mm. Min. Hole Depth: 125mm. Box Qty.: 10. The MasonMate Hot Dipped Galvanised Stud is made from Grade 5.8 Mild Steel. Complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems. M16 x 190mm (10)
These MasonMate Type E Nylon Plugs have the following specifications: Size: 5 x 25mm. Anchor Hole Size: 5mm. Screw Gauge: 4-6G. Screw Size: 2.5-3.5mm. Min Hole Depth: 35mm. Pack Qty.: 500. The MasonMate Type E Nylon Plugs have a rimless design. Ideal for fixing wall lights, shelving and cupboards. Often used with coach screws as satellite fixings. 5 x 25mm (500)
Box of 50 MasonMate Nylon Frame Fixings 10 x 100mm. The MasonMate Frame Fixings consist of a nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 10 x 100mm (50)
Box of 50 MasonMate Spring Toggles and Screws M6 x 75mm. The MasonMate Spring Toggles Screws are light-duty fixings for ceiling installations. The wings take high loads due to their wide coverage. Zinc plated for increased durability. M6 x 75mm (50)
Box of 200 MasonMateNylon Hammer-In Fixings 5 x 30mm. The MasonMate Nylon Hammer-In Fixings consist of a pre assembled nylon plug and bright zinc plated screw. Suitable for through fixing in Upvc, Timber and Metal door frames. 5 x 30mm (200)
Box of 50 MasonMate Hollow Wall Anchors M6 x 65mm. The MasonMate Hollow Wall Anchors provide a permanent threaded fixing in a hollow wall. Zinc Plated for increased durability. M6 x 65mm (50)
These MasonMate Type E Nylon Plugs have the following specifications: Size: 8 x 40mm. Anchor Hole Size: 8mm. Screw Gauge: 10-14G. Screw Size: 5.0-6.0mm. Min Hole Depth: 55mm. Pack Qty.: 150. The MasonMate Type E Nylon Plugs have a rimless design. Ideal for fixing wall lights, shelving and cupboards. Often used with coach screws as satellite fixings. 8 x 40mm (150)
Box of 100 MasonMate Spring Toggle Wings M3. The MasonMate Spring Toggle Wings are for use with machine screws (NOT supplied). Ideal for ceiling installations. Zinc plated for increased durability. M3 (100)