Rawplug All Metal Self-Drill Plasterboard Fixings which fit flush to board and can be used in double thickness plasterboard. Will also provide a secure fixing into lightweight and aerated concrete blocks. (NOTE. an 8mm pilot hole is required for this fixing). For use only with the screws supplied. Max Fixture Thickness: 10mm (20mm Screw). Except RAW07130 Max Fixture Thickness: 35mm (25mm Screw).Pack of 25.
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M4 x 20mm. Card of 10.Drill Size. 8mm.Fixing Thickness. 6mm
This Energizer® LED Candle Non-Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 5.9W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 38 x 110mmDimmable: NoRated: A+ Supplied as a Pack of 4.
Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials.Easy to apply.Fast acting and economical in use, ensuring sound strong joints.No.3.Size 250ml.
ForgeFix TechFast Cover Caps are specifically designed for use with TechFast Screws with an 8mm Hex head, 16mm or 19mm washers. Offers a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.These ForgeFix TechFast Cover Caps are suitable for self-drill screws with 19mm washers and an 8mm hex head. They come in the following: Colour: Poppy RedSize: 19mmPack Qty: 100
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 6.0 x 120mm.Box quantity: 100.
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.1/2 x 10 Box 200
Faithfull Farmer's Silage Tape is extra wide and made from durable, high strength PVC. Ideal for repair jobs around the farm, including silage patching, electrical insulation and banding. Specification: Colour: Black Width: 75mmLength: 20m
Evo-Stik Reswin W is a fast setting, extra strong wood adhesive is ideal for interior use. Dries to a clear finish that can be sanded, painted or stained. Resin wood glue is suitable for all types of wood and will set stronger than the wood itself. No mess, clog-free nozzle and twist to seal cap, all designed in a handy anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 250ml.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 1X.Adjustment: 30 - 40mm.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: OO.Adjustment: 13 - 20mm.
Rapid No. 13 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres.Type: 13 (galvanised steel).Size: 4mm leg lengthQuantity: 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R11, R54, E-TAC, CSN140 and ESN114 tackers.
Rapid No. 53 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The fine wire makes the fixed staple almost invisible, ideal for fabrics, decoration, small construction and light repair.Type: 53 (galvanised)Size: 8mm leg length.Quantity: 5,000. For use with the Rapid R53, R253, Hobby Staple gun, Hobby Staple gun dual, R453, MS4.1, Compacta, R153, R353, MS610, MS853, Alu 753, ESN530, R553, Hobby Electric and PS6-16 tackers.
Rapid No. 13 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres.Type: 13 (galvanised steel).Size: 14mm leg lengthQuantity: 5,000. For use with the Rapid R83,R30,R33, MS813, ESN113 and R213 tackers.
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.The kit includes an interchangeable nosepiece and a selection of 1/8, 5/32 and 3/16in rivets.
Rapid No. 606 precision cut, narrow crown staples are made from high performance galvanised steel and act like a double brad. They are resin coated for best results when used in wood and are ideal for flooring, partitioning, wallboard and frames.Type: 606 (galvanised)Size: 18mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.
Powerful, no compromise staple guns for 6-14mm staples. Designed for demanding professional applications and precision operations (tested to 100,000 fixings). 40% easier to operate thanks to a patented easy to squeeze trigger with 3-step force adjuster. All steel casing and wear parts inside. Made in Sweden. 5 Year Guarantee.Fires No.13 6-14mm fine wire staples.
The Rapid R28 and R36 Heavy-Duty Cable Tackers are suitable for diverse, demanding professional jobs and precision operations. Specially designed for low voltage cables up to 4.5mm and 6mm diameter. 40% easier to operate thanks to a patented easy to squeeze trigger with a 3-step force adjuster. All steel casing and wear parts inside. Made in Sweden. R28 Fires: No. 28 Cable Staples: 9-11mmR36 Fires: No. 36 Cable Staples: 10-14mmThe Rapid R36 stapler is ideal for securing low voltage cables (below 50V) up to 6mm diameter. Fires Cable Staples No. 36 10mm to 14mm.
