The Everbuild Instant Nails is a high strength, solvent-free, gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications. Dries white and may be overpainted if required. Instant Nails should be at room temperature when you begin using the product. If Instant Nails has been stored in cool conditions it should be placed in a warm room/bucket of warm water before use to gently heat up to working temperature. Do NOT apply Instant Nails at temperatures below +4°C.
Arrow T72 Professional wire & cable staple gun, Shoots large insulated staples for Non-Metalic sheathed cable. 12/2, 14/2 and other wire up to 1/2in (12.5mm) wide. Fires: T72 Insulated Staples.
For use with Arrow T72 staple gun. The exclusive design of the gun along with the insulated staples allow safe and secure installation of all types of wiring up to 12.5 mm / 1/2inT72HW Insulated staples (box 300) 5 mm x 12 mm
The Arrow T59 Insulated Staples are for use with the Arrow T59. Ideal for tacking bell wire, etc.Arrow T59 Insulated Staples have the following specification: Size: 6 x 8mm.Colour: Clear.Quantity: Box 300.
Monel staples have a rustproof finish and are recommended for their durability and resistance to corrosion. Totally waterproof and can be used under water. For use with T50, T55, T50PBN, HT50P, HTX50, ETFX50, ETF50PBN, CT50K, 5700 and 8000.The Arrow ARRT5038MS T50M 506m Monel staples come in the following:Box quantity: 1000Size: 10mm - 3/8 inch
The Arrow T50™ Series top quality 0.050 wire staples for T50, T55, T50PBN, HT50P (up to 12mm only), HTX50, ETFX50, ETF50PBN, CT50K, 5700 and 8000.The Arrow ARRT5014S T50 Staples Box contains top quality 0.050 wire staples for use with T50 and T55 tackers: These stapes can be used for window screens & shades, shelf papers and closet linings with the following specifications:Size: 1/4 inch / 6mmQty: 1250 staples
Arrow T18 wire cable tacker with all steel construction, the chrome finish resists wear and tear. The grooved driving blade and grooved guide ensures perfect stapling with jam resistant mechanism and a short span easy compression handle. Designed to accommodate smaller wires and cables up to 5mm diameter, suitable for telephone, intercom and burglar alarm wiring. The T18 takes 3/16 x 3/8 leg (ARRT1838) & 3/16 x 7/16 leg crown staples (ARRT18716)
The DEWALT Darlington Trainers have a lightweight synthetic upper with a padded collar and tongue for all-day wearer comfort. The product has a removable comfort footbed and the outsole is made from EVA and rubber, as used in sports technology footwear. They are fitted with a steel toecap that has been tested to 200 joules and an anti-scuff toecap for protection when kneeling and working. EN Test: CE EN ISO 20345-2011Safety Rating: SBSlip Rating: SRA1 x Pair of DEWALT Darlington Safety Trainers UK 10 Euro 44
Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. Gorilla Glue has an open working time of 20 minutes. The glue is brown in colour, but dries a tan colour, and is totally waterproof. Gorilla Glue is incredibly strong, bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and more. Once dried the product is sandable, stainable, paintable and can also take a varnish. Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues. This glue is unaffected by extreme hot and cold and will not break down when exposed to rain and snow. The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs. Originally used as a commercial adhesive for hard-to-glue materials. Once something is glued it will not come undone - it is set to survive years after the repair.The GRGGG60 Gorilla glue comes in the following: Size: 60ml
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 5 x 100mm.Box quantity: 100.
The Rawplug Nylon Self-Drill Plasterboard Fixings require no drilling, simply pierce plaster and screw home. The nylon insulates against accidental electrical contact with a choice of panhead or countersink screws, flush fit finish. The Screw and fixture can be removed and re-used. (e.g. When decorating).Maximum Fixture Thickness: 12mmPack of 12.
These ForgeFix traditional slotted, twin thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative applications and in applications where the screw may come in to contact with the elements avoiding corrosion. Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Raised head screws have both countersunk and raised structure, which is designed for aesthetic purposes on all types of ironmongery and lighting applications. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Raised Head ST Solid Brass 1.1/2 x 8 Box 200
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 3/4 x 6 Box 200
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 5/8 x 6 Box 200
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 1/2 x 6 Box 200
These Panel Pins are ideal for lightweight and decorative tasks. For corrosion resistance, the pins are sheradised. The shape of the pins helps to reduce splitting in hard or brittle timber. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings. Sheradisation is the process of choice for fixings or fasteners that require long-term corrosion resistance. The sheradised finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses into the surface of the fastener or fixing to form a sacrificial corrosion protective Zinc /Iron alloy coating which dramatically increases the nails' durability.Panel Pin Sheradised 30mm Bag Weight 500g
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 6.0 x 120mm.Box quantity: 100.
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 1.1/4 x 8 Box 200
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M10 x 100 Bag 10
