SW1-PF-T
_Push-Fit base for quick and secure fitting of alarm
_High performance optical sensor detects slow smouldering fires
_Hardwire Interconnect up to 12 smoke, heat and CO2 alarms
_Large central test and silence button
_5 Year Warranty
Mains powered with 1 x 9V backup battery. Thermistor heat sensor - detects the increase in temperature rather than smoke. Provides advanced class A2 detection to protect the most dangerous room in the home. Push2Fit base included - save time and money on installations. Positioning: Kitchen |Boiler Room | Laundry Room | Loft | Garage BS EN 14604: 2005 certified. For grade D installations (as per BS5839-6: 2013) Sounds a loud 85dB alarm (3 meters) and includes low battery warning feature
_Easy to install with a Push-Fit base included
_Thermistor heat sensor - designed to detect rate of increase in temperature
_Interconnect up to 50 alarms with the RF Interlink Base RF-BW-T or hardwire interconnect up to 12 SW1, HW1 or CW1 alarms.
_Test/Silence button feature
_5 Year Warranty
Normally installed in locations where there is a high risk of false alarm caused by routine use, e.g. Kitchen, Garage, Loft and Boiler Rooms. These locations are often overlooked when in fact they are the riskiest places for fires to start. Heat Alarms should always be used in conjunction with Smoke Alarms, they will not provide adequate protection on their own.
_Class A1 heat alarm with fixed point trigger temperature 54¡C - 65¡C and featuring unique Thermostek heat sensing detection. Sealed for life 10 year Panasonic battery
_Large central test and silence button. Stylish, low profile design. Sounder output 85dB(A) at 3m (minimum)
_Suitable for Grade F1 installations (BS 5839-6). Normally used in Kitchen, Garage, Loft, Boiler Room locations. Manufactured to BS 5446-2:2003, Kitemark KM 677057
_SmartRF ready/ Can be interlinked wirelessly with up to 50 alarms from same range by adding the FS1521W2-T Smart RF Radio Module (sold separately). 5 year manufacturers warranty
_Dimensions: 132mm diameter x 60mm deep
The Fireangel FA3820 is a 10 year Carbon Monoxide Alarm that's supplied with a sealed, tamper-proof battery. The advanced electrochemical sensor has been designed to accurately measure low levels of carbon monoxide within your home. The unit has been designed to either be wall mounted, using the two small screws provided, or left portable to be positioned where required. When left portable you're able to take away with you on holiday, ensuring you're protected at all times. The test button on the FireAngel FA3820 carbon monoxide detector has been designed to be easily located and pressed to make testing simple. The FA3820 detector is suitable for private and rented homes in England, Wales, Scotland and Ireland. As the battery is sealed within the unit it is compliant with the Scottish Fire & CO laws from February 2022. Carbon Monoxide is an incredibly poisonous gas which is emitted when fuel burning appliances burn incompletely. Carbon monoxide cannot be smelt, tasted or seen, and can be deadly - the only way to be alerted to CO is with an audible CO alarm. Common sources of CO include: Oil and gas boilers Portable generators Oil or solid fuel cookers Gas or paraffin heaters Barbecues Clogged chimneys Wood or gas fireplaces Cigarette smoke Gas appliances Any fossil fuel-burning appliance FireAngel are proud to support the carbon monoxide awareness campaign - Project SHOUT.
_Advanced electrochemical sensor detects dangerous levels of Carbon Monoxide ( CO ) in your home and alerts you with a clear, loud alarm
_As well as being calibrated and rigorously tested in-house the alarm has been third party approved through the British Standards Institute (BSI) and is Kitemark certified
_The unit has been designed to either be wall mounted or left portable so you can take it on holiday for protection on the go. It's also suitable for caravans, motor caravans and boats
_The device offers maximum protection for homes & rented properties as it is supplied with a sealed, tamper-proof battery which will last the lifetime of the alarm
_Pressing the large test button in the event of a low battery warning will activate our sleep easy feature which silences the low battery chirp for 8 hours
_Suitable for homes in England, Scotland and Wales, including rented properties
_The FA3820 detector holds a CE & UKCA mark and has been designed to conform to the standards - BS EN 50291-1: 2008 and EN 50291-2: 2019
A Carbon Monoxide alarm designed to accurately measure low levels of CO using enhanced electro-chemical technology and ensures a secure and speedy connection of the alarm to the the base unit with easy to installPush2Fitbase. Ideal for use in the home and provides early warning of the presence of CO using it's LED display and alarm. Its large central test button makes weekly testing easy for those that are less able. Hardwired & Wireless Interconnection TheCW1-PFcan hardwire interconnect with up to 12 Smoke (SW1), Heat (HW1) & Carbon Monoxide (CW1) units ensuring that when one device sounds, all other connected devices will sound. This device can also connect wirelessly with the FireAngel RF Interlink Base (RF-BW-T) and include up to 50 alarms on a single network with automatic ID coding. The alarms are extremely simple to link, taking approximately 5 minutes to link each device. Order today at our great prices, and enjoy our superb customer service! If youÕre not sure about quantities, sizes or have any other questions, our sales team will be more than happy to help. Give them a call now on 01424 220384.
_Replaceable 9V battery back-up
_Easy to install Push2Fit base
_Easy to use, large, concave central button - ideally suited to the less able
_Interconnect up to 50 alarms with the RF Interlink Base RF-BW-T or hardwire interconnect up to 12 alarms
_Enhanced Electro-Chemical Technology
