Needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.They are often used by engineers and model makers where precision is required.Each set contains six files fitted with comfortable soft-grip handles, the files have a working length of 65mm, blade length of 100mm and an overall length of 150mm. Suitable for use on metal and plastic. Six different file profiles as follows:Half round, round, flat taper, square, flat, three square.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 300-350mm (12-14in) files.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 200mm (8in) files.
The Faithfull File Handle is made from hardwood with a metal ferrule to prevent the handle splitting. File handles should always be used with tanged files for the prevention of personal injury, supplied with a pre-drilled pilot hole that should be drilled to the correct size for the file tangThis Faithfull Hardwood File Handle fits 150mm (6in) files.
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).The FAIFIRSC8 Engineers' File has the following specifications: Cut: Round Second. Blade Length: 200mm (8 in). Blade Width: 8mm (5/16 in).
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).The FAIFIRSC6 Engineers' File has the following specifications: Cut: Round Second. Blade Length: 150mm (6in). Blade Width: 6mm (1/4in).
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).The FAIFIRSC12 engineers' file has the following specifications:Cut: round second. Blade Length: 300mm (12in). Blade Width: 10mm (3/8in).
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).Cut round second Blade Length: 250mm (10in)Blade Width: 9mm (5/16in)
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Type: HandCut: Second CutBlade Length: 200mm (8in)Blade Width: 20mm (3/4in)
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHSC6 Engineers' File has the following specifications: Type: Hand. Cut: Second Cut. Blade Length: 150mm (6in). Blade Width: 16mm (5/8in).
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHSC12 hand file has the following specifications:Cut: Second Cut. Blade Length: 300mm (12in). Blade Width: 25mm (1in).
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHSC10 hand file has the following specifications: Cut: Second Cut. Blade Length: 250mm (10in). Blade Width: 23mm (15/16in).
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC12 half round engineers file has the following specifications:Length: 300mm (12in). Blade Width: 29mm (1.1/8in).
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHB12 hand file has the following specifications:Cut: Bastard. Blade Length: 300mm (12in). Blade Width: 27mm (1.1/16in).
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHB10 hand file has the following specifications:Cut: Bastard. Blade Length: 250mm (10in). Blade Width: 24mm (15/16in).
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 2 smooth. Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 0 (bastard).Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 2 (smooth).Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 0 (bastard). Type: round needle file.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: round bastard.Tanged.
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 18 teeth per 10mmSize 200mm (8in)Tanged
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 14 teeth per 10mmSize 300mm (12in)Tanged
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 16 teeth per 10mmSize 250mm (10in)Tanged
Conical edges and surfaces which taper to a point. Flat uncut back, surfaces double cut, thin edge single cut. For fine filing and polishing jobs.Size: 16cm.Cut: 2 (smooth).Type: Knife needle file.
The Bahco HRFM-10 Filemaster with an ERGO™ handle suitable for use on ferrous and non-ferrous metals, plastics, laminates and hard woods. The half round HRFM10 variant tapers towards the point and has milled, curved teeth. The concave back is uncut. Size: 250mm (10in).
Set of 6 needle files in snapshut plastic wallet with hanging hole. 1 of each of the following :Hand, flat, half round, round, three square and square, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (6).
Bahco Handled Round File 1-230 is fitted with a ERGO™ handle. These files are perfect for filing circular openings or concave surfaces. Tapered towards the point, 8in files are semi-pointed and double cut. Second Cut: Approx. 36 teeth per 25mm (Medium).Bastard Cut: Approx. 26 teeth per 25mm (Coarse).Bahco Handled Round Second Cut File1-230-08-2-2 Size: 200mm (8in).Cut: Round Second Cut.
Bahco Handled Round File 1-230 is fitted with a ERGO™ handle. These files are perfect for filing circular openings or concave surfaces. Tapered towards the point, 8in files are semi-pointed and double cut. Second Cut: Approx. 36 teeth per 25mm (Medium).Bastard Cut: Approx. 26 teeth per 25mm (Coarse).Bahco Handled Round Bastard File 1-230-08-1-2 Size: 200mm (8in).Cut: Round Bastard File.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Second Cut File 1-210-08-2-2 Size: 200mm (8in).Cut: Half Round Second Cut.
Bahco Handled Three-Square Second Cut File 1-170 with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. It has an equilateral triangle, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot. Size: 200mm (8in).Cut: Second Cut.
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Second Cut: Approx 36 teeth per 25mm (Medium).
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Ideal for filing grooves, rectangular holes, internal corners and fine adjustment of cutting tools. 6 inch square handled second cut file.
