Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90 D = 12.7 mmC = 9.5 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90 D = 15.9 mmC = 25 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90 D = 12.7 mmC = 50 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90 D = 18.2 mmC = 50 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 50 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90 D = 6.3 mmC = 25.4 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank. Angle A = 90° D = 6.3 mmC = 12.7 mm
Three piece handled file set for metalwork applications. These files will give a good professional finish to any work piece.The blade is high carbon steel for strength and durability and the bi-material handle has a hang hole for convenient storage. 1 of each 8in flat, half-round and three-square.
The Roughneck Flat File is double cut on both sides and single cut on both edges. Made from high carbon steel with an ergonomic soft grip handle for user comfort.1 x Roughneck Flat File 250mm (10in)
The Roughneck Flat File is double cut on both sides and single cut on both edges. Made from high carbon steel with an ergonomic soft grip handle for user comfort.1 x Roughneck Flat File 200mm (8in)
For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut flat bastardTanged.
For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut flat bastardTanged.
For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut flat bastardTanged.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF14.Size. 100 x 6mm (4 X 1/4 in)Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
This Faithfull Tile File has a tungsten carbide grit coating. It features a flat and a curved face, making it ideal for both straight and contoured shaping on ceramic tiles and marble. The file is fitted with a soft grip handle for user comfort. Length: 150mm (6in)
These Faithfull Drill Saw Rasps can be used to drill pilot holes in material and then can be used as a saw to cut shapes. They can also be used to enlarge existing holes. This set consists of:1 x metal drill saw rasp 6.5 x 90 mm. 1 x wood drill saw rasp 6.5 x 90 mm.
Faithfull stabilisers for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use. Pack of 2.
Faithfull setting device for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use.
The Faithfull FAIPROEXTB9 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and are 230mm (9in) in size.
The Faithfull FAIPROEXTB18 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and 460mm (18in) in size.
External corner profiles provide the answer to fast and accurate bricklaying by removing the need to raise corners first. Brick profiles may be used after three courses of bricks have been laid and allowed to set overnight. Once the profiles have been attached to the brickwork and set up, they provide an accurate and firm corner post from which a building line may be run. Building profiles are easy to set up, simple to use and are supplied complete with all the fitments needed to help you lay bricks quickly and accurately. The profile's design also allows easy access to the brickwork for pointing and rubbing in to be completed as work progresses for greater productivity. The galvanised steel construction is simple to set up and remove and can be adjusted using wing nuts. The Faithfull FAIPROEXT profile pack comes complete with all fittings and full instructions including:2 x External steel profiles2 x 225mm (9in) retaining bolts2 x 350mm (14in) retaining bolts2 x 450mm (18in) retaining bolts4 x Clamping brackets2 x Line holders1 x Setting device2 x Stabilisers4 x Wing nuts
Diamond needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.They are often used by engineers and model makers where precision is required.Each set contains six files fitted with comfortable soft-grip handles, the files have a working length of 50mm, blade length of 100mm and an overall length of 150mm. Diamond files are suitable for use on metal and plastic. Six different file profiles as follows: Half round, round, flat taper, square, flat, three square.
These Faithful files and rasp are fitted with a soft grip, non-slip handles with integral hanging holes for storage. The set contains 5 files and 1 rasp in a handy roll up storage wallet. Comprising: 250mm (10 in) Engineer's hand bastard cut file.200mm (8 in) Engineer's hand second cut file.Designed for deburring and the filing of sharp corners, internal shoulders and is ideal for use on flat surfaces. 200mm (8 in) Half-round second cut file.Designed for deburring and filing of large holes and flat surfaces. 250mm (10 in) Round second cut file.Designed for the filing of concave surfaces. 150mm (6 in) Three-square second cut file.Designed for the filing of internal angles and flat surfaces. 250mm (10 in) Half-round cabinet rasp.Specifically designed for use with wood, plywood, wallboard, hard plastics and many soft materials.
