Discover Faithfull Tools – Your Trusted Source for Premium DIY & Professional Tools
Faithfull Tools specialize in providing high-quality hand tools, power tools, and accessories for DIY enthusiasts and professionals alike. Whether you’re tackling home improvement projects or managing large-scale construction, our durable and reliable tools ensure precision and performance. Shop now for unbeatable deals, free shipping, and top-rated customer service. Trust Faithfull Tools for all your tool needs and take your projects to the next level with ease.
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges. It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage. Imperial and Metric markings.Length: 300mm (12 in).
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges. It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage. Imperial and Metric markings.Length: 1m (39 in)
The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. They are adjustable to working heights ranging from 1.6m (63in) to 2.9m (114in). The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. PLEASE NOTE that these props are for lightweight temporary support only and MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Maximum working load 60Kg (132lb) Vertical Maximum working load 20Kg (44lb) at 45deg Supplied with sturdy carry bag
This Faithfull Automatic Wire Stripper is a highly efficient wire stripping plier that clamps and strips insulated cable (1-3.2mm diameter) in one quick action. The high performance steel blades have five pre-set cable diameters and are hardened to 53HRC, providing a long working life. An adjustable cable length guide allows the pliers to be set between 5 to 32mm to make repetitive stripping tasks quick and accurate. Cable capacity: 1-3.2mm.Adjustable length: 5-32mm.
The Faithfull FAIPINKEY adjustable pin key is for use with locknuts on angle grinders when fitting or removing abrasive discs. It is a fully adjustable pin wrench from 15 to 52mm with a pin diameter 4mm. The stepped spanner handle can be used to undo nuts from 10 to 19mm. The FAIPINKEY is an ideal replacement pin wrench for most angle grinders, bench grinders, mitre saws and circular saws.
This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened Chrome-Vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. Ball end keys allow angle entry to 25º. Works in hard to reach areas. Faster insertion and removal. The handy storage caddy ensures that the key set can be safely stored in pockets and toolboxes. The key sizes are clearly shown on the caddy. Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm.
This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened Chrome-Vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. Ball end keys allow angle entry to 25º. Works in hard to reach areas. Faster insertion and removal. The handy storage caddy ensures that the key set can be safely stored in pockets and toolboxes. The key sizes are clearly shown on the caddy. Imperial Sizes. 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8in AF
This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened Chrome-Vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. Ball end keys allow angle entry to 25º. Works in hard to reach areas. Faster insertion and removal. Supplied in an ergonomic double layer, open out storage caddy which allows easy access to the smaller keys. Each key has a dedicated and clearly marked space for easy identification and is safely stored and ready for use. Metric Sizes: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10mm
The Faithfull Auto Start Power Torch is a powerful gas torch designed primarily for use in plumbing and soldering applications. The gas torch has an automatic piezo ignition and a fine flame adjustment valve with an instant FLARESAFE function, making the torch safe to use at any angle immediately after start up. The workstation neck is designed for hands free operation. Suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges - Part nos. FAI GZ350, FAI GZ170 (not included). Supplied with a stability base. Specifications: Max operating temperature: 1,400°C.Optimum power output: 1,450 Watt.Gas consumption: 104 g/h.EN417 Connection.
This Faithfull Digging Bar is manufactured from high-grade heat-treated steel bar with one diamond point and one bent chisel point (2in). The bent chisel, or slate bar can be used for breaking rocks or as a lever for moving heavy objects.
This Faithfull Battery Tester is simple and easy to use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 batteries and 1.5V button cells and folds down for easy storage. Features: Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE:The tester is activated by the battery being checked. Keep test time as short as possible to avoid unneccessary battery drain.
This Faithfull Roofing Square is designed to provide carpenters with a quick and accurate way to mark out for many building projects and is widely used when constructing roof rafters. It is manufactured from aluminium and has graduations marked with degree measurements, which helps to simplify material layout and timber cutting. Quick, accurate and able to calculate hips, valleys and angles on roofs making it a truly flexible square.
