The Faithfull Double Ended Scriber is a dual use scriber has a knife edge at one end and is pointed at the opposite end. The knife edge is ideal for scoring wood, plastics and laminates. It is also called a striking knife. Length: 165mm (6.1/2in).
The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.01mm (0.005in).Jaws: 60mm.
The Faithfull Digital Calipers are made from hardened stainless steel, this electronic digital caliper provides precision readings through a clear liquid crystal display. Its many features include a fine adjustment roller which allows precise measurements to be taken quickly and easily. The digital section button enables readings to be displayed in either metric or imperial format. The four-way measurement function provides a choice of readings in external, internal, depth and step modes. The strong plastic storage case enables the caliper to be kept in a dust and damp free environment. Specifications: Measuring range: 0-150mm / 0-6inResolution: 0.01mm / 0.0005inAccuracy: ±0.03mm / 0.001inRepeatability: 0.01mm / 0.0005inMax measuring speed: 1.5m/sec, 60in/secMeasuring system: Linear capacitive measuring systemDisplay: LCD displayCharacter Height: 6.35mmWorking temperature: 5-40°C, 41-104°FData output: Serial output for interface with computer or printerBattery: 1.55V, LR44Auto power off: 5 minutes
The Moore & Wright DFC Series Digital Calipers are fitted with an extra large, easy-to-read display. The calipers have a high measuring speed of 120in per second and you can read/convert measurements in inch, metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
The Faithfull Die Holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder-coated, with each end knurled for a comfortable non-slip grip.Size: 50.8mm (2 in)
The Faithfull Depth Gauge is a versatile tool that allows the angle and depth to be measured simultaneously. The protractor features deep etched graduations 0 - 180° in opposite directions permitting the reading of both the direct and supplementary angles. The rule is graduated in both imperial and metric dimensions up to 150mm (6in) and a knurled thumb nut allows the rule to be locked at the chosen angle. Blade Length: 150mm (6in).Graduations: 0.5mm or 64ths.
Faithfull Deep Pot Magnets have a steel outer shell with a highly magnetic front face and an M6 threaded hole in the back. They are made from alnico to provide high-resistance to corrosion and operate at temperatures up to 220°C. The magnets offer high-holding forces on parts with a clean surface and are suitable for many applications. They are ideal for incorporating into jigs and fixtures.Diameter: 27.0mmHeight: 25.4mmPull Power: 5.0kgHole Thread: M6
Faithfull Deep Pot Magnets have a steel outer shell with a highly magnetic front face and an M6 threaded hole in the back. They are made from alnico to provide high-resistance to corrosion and operate at temperatures up to 220°C. The magnets offer high-holding forces on parts with a clean surface and are suitable for many applications. They are ideal for incorporating into jigs and fixtures.Diameter: 20.5mmHeight: 19.5mmPull Power: 4.0kgHole Thread: M6
The Faithfull Centre Squares (Finders) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Squares (Finders) is supplied in a box.Bar Capacity: 75mm.
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 3mm (1/8in).Length: 100mm (4in).
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 2.5mm (3/32in).Length: 100mm (4in).
The Faithfull Fixed joint Jenny Calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range: 150mm (6in).
The Faithfull Internal Spring Calipers, have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 75mm (3 in)
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 6mm x 1.0 Length. 1 1/2 x Diameter.
The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (Square, Protractor and Centre) that can be attached to the stainless steel ruler, allowing versatile measurements and marking on various types of workpieces. The stainless steel rule has engraved graduations; one side metric, one side imperial and hardened and ground slide ways. Range: 180°.Length: 300mm (12in).
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.Tip Diameter: 2.5mm (3/32in).Length: 100mm (4in).
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Supplied with a tapping drill.Kit 4.0mm x 0.7Length 1 1/2 x Diameter
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 2mm (5/64 in).
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Supplied with a tapping drill.Kit 10mm x 1.5Length 1 1/2 X Diameter
Recoil Inserts are made from high quality stainless steel wire, with a diamond shaped cross section wound to the shape of a spring thread. The insert, which is larger in diameter than the tapped hole, is compressed during installation then allowed to spring back permanently anchoring the insert in the tapped hole. Because of its larger diameter the recoil insert has a greater contact area and is normally stronger than the original thread.Size. M4.0 x 0.70 Pitch.Length. 1 1/2 X Diameter
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Kit 12.0mm x 1.75Length 1 1/2 x Diameter
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Supplied with a tapping drill.Kit 9mm x 1.25Length 1 1/2 X Diameter
This hollow punch is made from carbon steel. It has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather.
