The DEWALT DCH832N XR FlexVolt SDS Max Chipping Hammer has been designed to tackle a variety of demolition jobs, and ngineered for fast chipping on hard concrete. The brushless motor can handle a wide variety of applications, while maintaining a consistent speed under load with constant-speed electronics. Built for comfortable operation, the 54V XR FlexVolt anti vibration system helps reduce vibration felt by the user through the handles. This highly maneuverable, 6.5kg midweight tool can be used for horizontal chipping in upper or lower wall areas, and concrete surface preparation applications. The hammer has Wireless Tool Control compatible, allowing the tool to be wirelessly paired with another Wireless Tool Control enabled device, for automatic activation and shut down via the app. Comes as a Bare Unit, NO battery or charger supplied. Specification: Impact Rate: 0-2,900/bpm.Impact Energy: 10.5 joules.Weight: 6.5kg.
The Makita DHP482 LXT Combi Drill features an all-metal gear construction for high transmission durability. Its variable 2-speed, reversible motor features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions. It also features twin LED job lights with pre-glow and after-glow functions.Ideal for the professional or DIY enthusiast. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 & Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm.The Makita DHP482Z Combi Drill features an all-metal gear construction for high transmission durability.Its variable 2-speed, reversible motor features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions.It also features twin LED job lights with pre-glow and after-glow functions. Ideal for the professional or DIY enthusiast. It comes as a 18V bare unit, NO battery or charger included. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 & Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm.
The DEWALT DCD996 XR Brushless Combi Drill has a tough 3-speed all-metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the user's masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark workspaces. The grip design provides greater application control and maximum comfort. Specification: Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Masonry 16mm, Steel 15mm, Wood 55mmWeight: 2.1kgThe DEWALT DCD996N XR Brushless Combi Drill is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCH273 XR Brushless SDS Plus Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. The hammer comes with a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Fitted with an electronic clutch for consistently high torque and improved durability, and ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. Specifications: Modes: Rotary, SDS Hammer, Chisel only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joules.Capacity: Wood 26mm, Metal 13mm, Masonry 24mm.Weight: 3.1kg.The DEWALT DCH273H2T XR Brushless SDS Plus 3 Mode Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. The hammer comes with a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Fitted with an electronic clutch for consistently high torque and improved durability, and ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm.Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. It is supplied with the following specifications: 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Multi-Voltage XR Li-ion Charger.1 x Belt Hook.1 x Multi-Position Side Handle.1 x TSTAK Heavy-duty Kitbox.
The Makita DHR202RF SDS Plus LXT Rotary Hammer Drill is capable of drilling through steel, wood and masonry with ease. The chisel can rotate a full 360° with 40 different locking positions. With 3-modes of operation: Rotary drilling, Hammer drilling or Chiseling. Fitted with high comfort grips for maximum user comfort and a conveniently located push-button for forward and reverse. Fitted with an LED job light with afterglow and a one-touch sliding chuck for easy bit changes. The 22 minute charge time with the air-cooled Makstar Optimum Charging System. Lithium-ion’s 40% weight saving means 18V power can be obtained by a battery that weighs the same as a 12V NiMH battery. They have a greater life span than their NiMH or NiCad counterparts giving 430% greater run time. Specification: No Load Speed: 0-1,100/min.Impact Rate: 0-4,000/bpmImpact Energy: 2.0 joulesCapacity: Concrete 20mm, Steel 13mm, Wood 26mm Weight: 3.2kgThis Makita DHR202Z SDS Plus Rotary Hammer comes as a bare unit, NO battery or charger supplied.
Makita DDF458Z LXT Drill Driver with enhanced dust and drip-proof performance is ideal for use in outdoor applications or harsh environments. Its single sleeve keyless chuck allows for easy bit installation/removal, even with one hand. There is also a twin LED job light with pre-glow and afterglow functions. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 400/0-2,000/min.Max. Torque: 91Nm.Torque Settings: 21 + Drill.Capacity: Steel 13mm, Wood 65mm.Weight: 2.1kg.
The Einhell TC-ID 18 Li - Solo Hammer Drill for drilling and impact drilling. Speed electronics ensure the tool can be adjusted to the particular material and application. A continuous operation lock and reverse function make work even easier. Its rugged 13mm quick-change drill chuck allows for easy tool change. The ergonomic soft grip handle helps to reduce user fatigue. It can also be used with a drill stand, 43mm shaft. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This hammer drill comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Adjustable Metal Drill Stop and 1 x Additional Side Handle. Specifications: Chuck: 13mm.No Load Speed: 0-2,600/min.Impact Rate: 41,600/bpm.Drilling Capacity: Concrete 13mm, Metal 10mm, Wood 25mm.Weight: 1.6kg.
The Makita DDA351 LXT Angle Drill is fitted with a keyless chuck and a high power 4-pole motor for excellent drilling performance. Conveniently located push button for forward and reverse actions and a large trigger with high comfort grips for decreased user fatigue in prolonged use. There is also an LED job light with afterglow. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed: 0-1,800/min.Max. Torque: 13.7NmCapacity: Wood: 25mm, Steel: 10mmWeight: 1.8kg
