The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 3.0mm.Working length: 33mm. Overall length: 61mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit.Single pack. Size: 13.0 x 151mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11.00mm.Working length: 94mm.Overall length: 142mm.
The Metabo HSS-R Drill Bits, roll-milled version with a cylindrical, type N, 118° cone-shaped tip and shell polished surface. Suitable for drilling in steel, non-ferrous metals, alloyed and non-alloyed cast steel. Up to 900 N/mm² tensile strength. Supplied in a handy metal case and contains the following: Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 & 10mm.
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 2.50mm.Working length: 30mm. Overall length: 57mm.
These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied pre packed with the following specification: Diameter: 2.0mm.Overall Length:Working Length:Pack Size: 2.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 17/64in.Working length: 69mm.Overall length: 109mm.
The Dormer Imperial A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Suitable for both hand and machine use. Made to DIN 338RN/BS328/ISO 235 standards.Tip diameter: 7/32in. Working length: 57mm.Overall length: 93mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit. Size 3.0 x 61mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 2.5 x 57mm.
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 4.0mm.Working length: 43mm. Overall length: 75mm.
The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135 degree non slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP150PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.5mm.Pack quantity: 3.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 4.0 x 75mm.
The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP300LS Pre Pack HSS Jobber Drills Long Series 3.0mm have the following specifications:Diameter: 3.0mm. Overall Length: 100mm. Pack quantity: 2.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 5.0 x 86mm.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 4.8mm.Working Length: 4.6mm. Overall Length: 88mm. Pack Quantity: 10.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 5.0mm.Working Length: 46mm.Overall Length: 86mm.Pack Quantity: 1.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 3.0mm.Working Length: 33mm.Overall Length: 61mm.Pack Quantity: 2.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 8.0mm.Working Length: 72mm.Overall Length: 117mm.Pack Quantity: 1.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 6.0mm.Working Length: 57mm. Overall Length: 93mm.Pack Quantity: 1.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 9.0mmWorking length: 81mm.Overall length: 125mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.The Irwin IRW10502388 HSS Pro Drill Bit comes in the following:Size: 5.5 x 93mm.PVC Tube.
The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 6.0mm.Total length: 93mm.Working Length: 57mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size: 2.0 x 49mm.PVC Tube.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill (2). Size 7.0 x 109mm.
The Irwin HSS Pro Drillbits are made from high performance, high speed steel. They have an 118° split point shape for increased performance and very good centring. The drillbits ensure precision starting, with no need to pre-punch or pilot drill. They penetrate the material quickly, requiring little effort and feed pressure. Manufactured to DIN 338 standards. DIN 338 drillbits are suitable for many trade and industrial applications in alloyed and un-alloyed steel, non-ferrous metal, cast iron and plastics.The Irwin HSS Reduced Shank Pro Drill Bit has the following specification: Diameter: 12.0mm.Working length: 101mm.Total length: 151mm.Shank diameter: 10mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloy steels. They have 5% cobalt for higher heat and abrasion resistance and a heavy-duty web construction for strength and durability. The 135° split point begins drilling immediately, minimising bit walk and they are manufactured to DIN 338 Standards.The IRW10502524 HSS Cobalt Drillbits are supplied in a pack of 10. Specifications:Diameter: 4.5mm.Total length: 80mm.Working length: 47mm.
HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish. The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing. They have a ground flute for maximum accuracy and fast chip removal. The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials. They are perfect for drilling low carbon steel, soft metals, wood and plastics. They are manufactured to DIN 340 standards and have a cylindrical shank.The Irwin HSS Long Pro Drill Bits come in a bulk pack of 10. Specification: Diameter: 6.5mm.Total length:150mm.Working length: 100mm.
HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish. The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing. They have a ground flute for maximum accuracy and fast chip removal. The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials. They are perfect for drilling low carbon steel, soft metals, wood and plastics. They are manufactured to DIN 340 standards and have a cylindrical shank.The Irwin HSS Long Pro Drill Bits come in a bulk pack of 5. Specification: Size: 12.0mm.
The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 7.0mm.Total length: 109mm.Working Length: 69mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size 3.5 x 70mm.PVC Tube.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 6.0 x 93mm.
DEWALT HSS Jobber Drill Bits are a general purpose metal drill bit. Manufactured from High Speed Steel to DIN338, using a hot roll forging process, with a steam tempered black finish. They have a cylindrical ground right hand cutting helix and a 118° point angle. DT5911: 10 Piece: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10mmDT5912: 13 Piece: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.8, 5, 5.5, 6, 6.5mmThe DEWALT DT5912 HSS-R Jobber Drill Bit Set is supplied in a plastic carry case, with the following sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.8, 5, 5.5, 6, 6.5mm
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 3.5mm.Working Length: 39mm.Overall Length: 70mm.Pack Quantity: 2.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 8.5mm.Working Length: 72mm.Overall Length: 117mm.Pack Quantity: 1.
