The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 3.0mm.Working length: 33mm. Overall length: 61mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit.Single pack. Size: 13.0 x 151mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11.00mm.Working length: 94mm.Overall length: 142mm.
The Metabo HSS-R Drill Bits, roll-milled version with a cylindrical, type N, 118° cone-shaped tip and shell polished surface. Suitable for drilling in steel, non-ferrous metals, alloyed and non-alloyed cast steel. Up to 900 N/mm² tensile strength. Supplied in a handy metal case and contains the following: Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 & 10mm.
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 2.50mm.Working length: 30mm. Overall length: 57mm.
These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied pre packed with the following specification: Diameter: 2.0mm.Overall Length:Working Length:Pack Size: 2.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 17/64in.Working length: 69mm.Overall length: 109mm.
The Dormer Imperial A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Suitable for both hand and machine use. Made to DIN 338RN/BS328/ISO 235 standards.Tip diameter: 7/32in. Working length: 57mm.Overall length: 93mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit. Size 3.0 x 61mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 2.5 x 57mm.
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 4.0mm.Working length: 43mm. Overall length: 75mm.
The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135 degree non slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP150PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.5mm.Pack quantity: 3.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 4.0 x 75mm.
The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP300LS Pre Pack HSS Jobber Drills Long Series 3.0mm have the following specifications:Diameter: 3.0mm. Overall Length: 100mm. Pack quantity: 2.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 5.0 x 86mm.
The G & J Hall CONECUT® is a versatile hole-cutting tool for rapid drilling and enlarging holes in thin materials up to 2mm thick. Designed for industrial applications, the diameter of the hole increases as the CONECUT® is advanced into the material, providing infinitely variable sizes For use in sheet steel, non-ferrous metals, plastics, Formica and plywood The conical shape of the tool enables any size of hole to be drilled between the bottom and the top of the taper.When drilling metals always use a coolant. Conecut® applications:ElectricalHeatingVentilationPlumbingShop fitting installations etc.Auto body repairControl panelsSheet metalwork etc.MaintenanceThe Halls CC O CONECUT® High Speed Steel Sheet & Tube Drill Bit has the following specification: Size Range: 25- 40mm.Chuck: 3/8in/10mm.
The Halls High Speed Steel Step Drill for drilling holes in ferrous and non-ferrous materials up to 5mm thick.Size Range. 5, 7, 9,11,13mm.Shank. 1/4 Hexagon.
The G & J Hall CONECUT® is a versatile hole-cutting tool for rapid drilling and enlarging holes in thin materials up to 2mm thick. Designed for industrial applications, the diameter of the hole increases as the CONECUT® is advanced into the material, providing infinitely variable sizes For use in sheet steel, non-ferrous metals, plastics, Formica and plywood The conical shape of the tool enables any size of hole to be drilled between the bottom and the top of the taper.When drilling metals always use a coolant. Conecut® applications:ElectricalHeatingVentilationPlumbingShop fitting installations etc.Auto body repairControl panelsSheet metalwork etc.MaintenanceThe Halls CC O CONECUT® High Speed Steel Sheet & Tube Drill Bit has the following specification: Size Range: 3 - 14mm.Chuck: 1/4in/6.5mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 9.50mm.Working length: 81mm.Overall length: 125mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 15 mm HSS.Working length: 83mm.Overall length: 156mm.
The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds. Dormer A002 HSS-TiN Coated Jobber Drill 3.50mm. Pouch of 2. Tip Diameter: 3.50mm.Working Length: 39mm.Overall Length: 70mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 14.50mm.Working length: 114mm.Overall length: 169mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 16 mm HSS.Working length: 84mm.Overall length: 157mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 5.30mm.Working length: 52mm.Overall length: 86mm.
The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds. Dormer A002 HSS-TiN Coated Jobber Drill 4.50mm Pouch of 2 Tip Diameter: 4.50mm.Working Length: 47mm.Overall Length: 80mm.
The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes. Special split-point ensures easy starting and accurate drill location.
Dormer A094 HSS TiN Coated Metric jobber drills in round plastic 'Select-A Drill' case with each size embossed for ease of identification.No.413: 13 Drills 1.5 to 6.5mm by 0.5mm. Set Contains: 1.5, 2.0, 2.5, 3.0, 3.3, 3.5, 4.0, 4.2, 4.5, 5.0, 5.5, 6.0 and 6.5mm drills.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 1mm.Working Length: 12mm.Overall Length: 34mm. Pack of 2.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 7.0mm.Working length: 69mm.Overall length: 109mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 3.50mm.Working length: 39mm.Overall length: 70mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 3.50mmWorking length: 39mm.Overall length: 70mm.
The Halls MC High Speed Steel Step Drill provides an easy way to cut the hole size you want. Each tool cuts parallel hole sizes. For use on sheet metal to stated maximum thickness.Size range.4,6,8,10,12,14,16,18,20mm.Maximum Material Thickness. 4mm.Shank to fit size. 10mm. When drilling metals always use a coolant.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 12.0mm.Working length: 101mm.Overall length: 151mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 6.10mm.Working length: 63mm.Overall length: 101mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 4.20mmWorking length: 43mm.Overall length: 75mm.
