The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills.Diameter: 27mm
The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.The Irwin IRW10502581 HSS Pro TiN Coated Drill Bit comes in the following:Size: 4.0 x 75mm
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size 3.5 x 70mm.PVC Tube.
The G & J Hall CONECUT® is a versatile hole-cutting tool for rapid drilling and enlarging holes in thin materials up to 2mm thick. Designed for industrial applications, the diameter of the hole increases as the CONECUT® is advanced into the material, providing infinitely variable sizes For use in sheet steel, non-ferrous metals, plastics, Formica and plywood The conical shape of the tool enables any size of hole to be drilled between the bottom and the top of the taper.When drilling metals always use a coolant. Conecut® applications:ElectricalHeatingVentilationPlumbingShop fitting installations etc.Auto body repairControl panelsSheet metalwork etc.MaintenanceThe Halls CC O CONECUT® High Speed Steel Sheet & Tube Drill Bit has the following specification: Size Range: 4 - 30.5mm.Chuck: 3/8in/10mm.
The Hall Bradrad® precision tools drill and deburr in material thicknesses up to 10mm. Designed for industrial applications, each step produces accurate, parallel holes with a small clearance on the nominal diameter. It positively deburrs the entry side as the hole is drilled, and if the work can be reversed, both sides. 'S’ Type Bradrad® drills are used to machine a wide variety of materials and for many different applications. No pilot drill is required, and good quality deburred holes are produced with minimum fuss using a bench drill or light pedestal drilling machine.Each Bradrad® has eleven different drilling diameters. When drilling metals always use a coolant.The Halls Bradrad® Tool has the following specification: Drill Sizes: 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, & 38mm.Shank: 3/8in (10mm).
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill (2). Size 6.5 x 101mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 16.0mm.Total length: 600mm.Working length: 540mm.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 18.0mm.Total length: 400mm.Working Length: 300mm.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills.Specifications:Diameter: 9.0mm.Total length: 130mm.Working Length: 80mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size: 7.5 x 109mm.PVC Tube.
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502776 Auger drill bit has the following dimensions:Drillbit diameter: 26.0mmTotal length: 191mmWorking Length: 126mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502772 Auger drill bit has the following dimensions:Drillbit diameter: 24.0mmTotal length: 191mmWorking Length: 126mm
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit.Specifications:Diameter: 26.0mm.Total length: 460mm.Working length: 400mm.
Starrett BI Metal Cordless Smooth Cutting Hole Saws (CSC Hole Saws) are constructed of hardened heat and abrasion resisting high speed steel teeth with a tough alloy body and cap, giving exceptional strength, durability and shatter resistance. Designed for use with battery operated power tools, our CSC Hole Saws will cut twice as many holes as the equivalent standard hole saw per battery charge. Advantages:The perfect tool for on site work with battery operated power tools.Ideal for cutting stainless, tool and mild steel sheeting plus plasterboard, wood and thin plasticsComplete assembly - there is no requirement to purchase a separate arbor and pilot drill.Constant pitch teeth provide exceptionally smooth cuts. Pitch 8 teeth per 25mm/inch.Safety stop at the base of the hole saw prevents drilling beyond maximum cutting depth.25mm
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The Vitrex 10 2772 Diamond Tile Drill Self Adhesive Kit System offers both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Includes water delivery and collection cups for clean drilling and effective cooling for the drilling surface. Use for drilling holes to install shower heads or large pipe work. Suitable for all hard tile types. Bit size: 35mm. Contents: 1 x Drill Guide.1 x Diamond Drill.1 x Set of Adhesive Pads.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0278 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 73mm (2.7/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0256 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 59mm (2.5/16in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0258 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 67mm (2.5/8in).
Starrett BI Metal Cordless Smooth Cutting Hole Saws (CSC Hole Saws) are constructed of hardened heat and abrasion resisting high speed steel teeth with a tough alloy body and cap, giving exceptional strength, durability and shatter resistance. Designed for use with battery operated power tools, our CSC Hole Saws will cut twice as many holes as the equivalent standard hole saw per battery charge. Advantages:The perfect tool for on site work with battery operated power tools.Ideal for cutting stainless, tool and mild steel sheeting plus plasterboard, wood and thin plasticsComplete assembly - there is no requirement to purchase a separate arbor and pilot drill.Constant pitch teeth provide exceptionally smooth cuts. Pitch 8 teeth per 25mm/inch.Safety stop at the base of the hole saw prevents drilling beyond maximum cutting depth.Size 19mm
The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 18 mm.Length : 165 mm.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 3.3mm.Working Length: 36mm.Overall Length: 65mm.Pack Quantity: 2.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 9.0mm.Working Length: 78mm. Overall Length: 125mm.Pack Quantity: 10.
