The Yale PM320 3 Lever mortice sashlocks offer a standard level of security and are suitable for use on internal timber doors. The deadbolt is locked or unlocked by key from either side. These sashlocks also have a 13mm anti-saw deadbolt, and has been designed for use with door furniture. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Finish: Polished Chrome Case Size: 79mm x 101mm (3 in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.
The WS6 security door chain complies with the TS003:2012 DHF standard for door chains and limiters, and is Secured by Design approved. This door chain is simple to install and easy to use, holding the door in a slightly open position whilst restraining against a forced attack. Also helps you identify a caller before the door is fully released.This Yale YALVWS6CH can be fiited in less than 2 minutes so you get instant full protection and security. The WS6 is finished in Chrome and carries a 2 Year Guarantee.
The Yale PM552 5 lever mortice deadlocks offers a high level of security and are suitable for use on external timber doors. The deadbolt on the lock is locked or unlocked by key from either side. These deadlocks also have a 14mm anti-saw deadbolt and are recommended for use on a front door in conjunction with a Yale BS nightlatch. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Finish: Polished Brass Case Size: 80mm x 70mm (3 in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole)
The Yale PM236 2 lever bathroom mortice sashlock offers a standard level of security and are suitable for use on internal timber doors. The deadbolt is locked or unlocked NOT by key but using a separate handle set (not supplied) from either side. These sashlocks also have a 12.5mm deadbolt, and are suitable for use on bathroom doors or other internal doors where privacy is required. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Finish: Polished Brass Case Size: 67 x 102mm (2.5 in) Pack: Visi x 1 Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.
The Yale PM444 series security door bolts are concealed (mortice fixed) into the door with a bolt which throws into the door frame. Operated by using the key supplied giveing added securiy and extra protection to your home.The Yale YALP2PM444CH Door Security Bolts are finished in chrome, has a 2 year guarantee and is supplied with 1 x key Pack of Two
These Union 2294 2 lever mortice bathroom sashlocks are suitable for timber doors hinged on the left or right (up to a thickness of 54mm) and requiring turn and emergency release functions. They can be deadbolt locked or unlocked by separate turn (not supplied) from inside and also deadbolt unlocked by separate emergency release from outside (not supplied). The 11mm reversible latchbolt bolt is withdrawn by lever handle from either side and the two way action is suitable for lightweight knobs or sprung handles. Please note these locks are not suitable for unsprung lever handles. Case Steel, black powder coatFollower 8mm square, 5mm turn followerNot suitable for bolt through fixing A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Chrome Finish (Striking Plate Security box type, finished to match forend)Case Size: 76mm x 102mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Visi Pack
These Union 2294 2 lever mortice bathroom sashlocks are suitable for timber doors hinged on the left or right (up to a thickness of 54mm) and requiring turn and emergency release functions. They can be deadbolt locked or unlocked by separate turn (not supplied) from inside and also deadbolt unlocked by separate emergency release from outside (not supplied). The 11mm reversible latchbolt bolt is withdrawn by lever handle from either side and the two way action is suitable for lightweight knobs or sprung handles. Please note these locks are not suitable for unsprung lever handles. Case Steel, black powder coatFollower 8mm square, 5mm turn followerNot suitable for bolt through fixing A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Polished Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 76mm x 102mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Boxed
Union's StrongBOLT 5 Lever Mortice Sashlock feature an innovative, easily reversible radius latch that uses the Union SwitchLatch technology, meaning that no tools are required. This is both simple to use and time-saving. The sashlocks have a radius inner forend for ease of installation. They can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door. The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing. The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 20mm for secure positive deadlocking and additional resistance against attack. 2205S can be keyed alike with 2105S.Forend finish: Stainless steel. Case size: 68 x 109.6mm. Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
The Union 2200S StrongBOLT 5 lever mortice sashlock is ideal for timber doors hinged on the left or right and they are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the 20mm deadbolt for secure positive deadlocking and additional resistance against attack. 2200S features an anti-pick, anti-saw and anti-drill security, chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult. Supplied with covered escutcheon to match forend. The StrongBOLT series of locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and have been approved by the police Secured by Design initiative. They are also covered by a 10 Year guarantee. The radius inner forend for ease of installation, can be installed into many UK mortices without the need for additional carpentry or spoiling the edge of the door. The anti-pick and keyhole protection prevents forced entry by picking and the lock has hardened steel pins that provide resistance to attack from sawing. Case Steel, red powder coat.Forend Stainless steel or brass finish.Striking Plate Finished to match forend.Face Plate supplied with square face plate which covers a radius inner forend.Deadbolt With hardened steel rollers.Latch Bolt Reversible.Follower 8mm square.Rebate Kit 2200REB 13mm or 26mm.Keying Groups Supplied to differ or to pass/keyed alike.Supplied with 2 steel nickel plated keys.Key Blank Number KB430.
The Yale 85 series deadlocking standard nightlatch security locks are some of the most widely-used front door latches. They are key operated from the outside and lever handle operated from the inside. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The inside handle can also be deadlocked by a reverse turn of the key in the cylinder giving additional security (when deadlocked in this manner the latch cannot be opened from the inside only from the outside with the key) Supplied with 1109 Cylinder. The 85 series security nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door.This Yale 85DMGPB has a hardened Case Finish in Dark Metallic Grey and the Cylinder is finished in Polished Brass. The lock is covered by a 2 Year Guarantee and has a High Security Rating. Pack: Boxed
The Union 3G114 C-Series BS 5 Lever Mortice Deadlocks are suitable for use on timber doors hinged on the left or right with the keys being suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 20mm bolt throw. The 3G114 mortice deadlocks are supplied with one plain escutcheon and one escutcheon with a cover plate, finished to match the faceplate/strike. The 3G114 series locks are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. Case: Silver powder coatBox Strike Assembly: Painted to match forendDeadbolt: Brass, with hardened steel rollersKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit: B-3G114R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Visi packed.Forend Finish: Brass Case Size: 67mm x 77mm (2.5 in) Backset: 40mm This is the measurement from the edge of the door to the centre of the keyhole.
The UNION CE3F Fixed Size 3 Rack & Pinion Door Closer is CE marked in all 3 positions for timber and metal fire doors, the only door closer in its class to be so. Quick and easy to fit, with specific templates for each mounting position, eliminating incorrect installation. Will fit most of the popular UK door sizes, as it uses the same footprint and fixing dimensions it can be easily retro fitted with minimum effect. Its non-handed design provides maximum flexibility, reducing the amount of parts stocked. Its adjustable arm allows the CE3F to be easily installed and adjusted in multiple applications. Easy to set up, side mounted door speed and latch controls for convenient access, allowing easy and accurate set of the door opening and closing. Supplied with everything needed for installation. Comes with a 10 Year Guarantee.
The Yale PM444 series security door bolts are concealed (mortice fixed) into the door with a bolt which throws into the door frame. Operated by using the key supplied giveing added securiy and extra protection to your home.The Yale YALPM444WE Door Security Bolt is finished in white, has a 2 year guarantee and is supplied with 1 x key
The Yale PM562 British Standard 5 lever mortice deadlocks offer a very high level of security and are suitable for use on external timber doors. The deadbolt is locked or unlocked by key from either side. The PM562 series lock are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. These deadlocks also have a 20mm anti-saw deadbolt, an anti-drill case and have a 15 year guarantee. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.The Yale Locks YALPM562CH30 PM562 Hi-Security BS 5 Lever Mortice Dead Lock 68mm 2.5 inch comes in the following:Finish: Polished BrassCase Size: 81mm x 89mm (3 inch)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole
The Yale Y3 standard security nightlatch has been developed to offer customers a stylish contemporary lock combined with the performance and quality expected from Yale. It has a modern design and can be fitted as a replacement for the P77 traditional nightlatches with no additional chiselling required. The latch can be deadlocked by the snib button internally and the snib function enables the latch to be held back. This nightlatch is suitable for both left and right handed, inward opening doors and is supplied with the Yale 1109 cylinder and 2 Keys supplied (Key blank: B-KEY-1109) The Y3 nightlatches have a 60mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door. Supplied with 1109 external cylinder.This Yale Y3CHCH60 has a hardened case finished in Polished Chrome and the Cylinder is finished in Polished Chrome 60mm BacksetPack Type: VisiSupplied with 2 x keysSecurity Rating: Standard
UNION's basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality. The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike. The latch is made from nylon for a quieter closing action.Finish: Zinc plated.Case size: 79mm (3 inch).Backset: 57mm.
The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.Finish: Polished BrassCase Size: 76mmBackset: 57mmBoxed
The UNION FastLatch, is a range of push fit latches and privacy bolts for residential applications. The FastLatch Easy Fit Bolt is for use with an emergency release or bathroom turn with a 5mm square spindle. Bolt through fixings centres 38mm. Three times faster to fit than a standard latch. Minimal skill level required to install and the side ribs provide a secure fit, no visible fixings. It has an attractive, modern design which suites with other door furniture, providing a stylish interior finish. Rigorously tested to 800,000 closing cycles, to ensure excellent reliability, so you can rely on FastLatch for decades of use. Bolt through fixing holes to allow a more secure fixing of door furniture over time reducing wear and tear on the door. Supplied with both round and square corner strikes, so the correct option can be tailored to either new frame preparation or provide a retrofit solution. Also supplied with a splinter guard to hide frame preparation resulting in a professional finish. Choice of 3 high-quality finishes: Polished Brass, Polished Chrome and Satin Nickel.Available in 60mm (2.5in) and 73mm (3in) sizes. Comes with a 5 year guarantee.This UNION FastLatch Easy Fit Bolt has the following specifications: Finish: Polished BrassCase Size: 60mmBackset Size: 44mm
The Yale 82 deadbolt nightlatch front door lock has a deadbolt operation only with no intermediate latching action and it is opened by a key from the outside and a turn handle operation from inside. The 82 deadbolt nightlatch has a 60mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass. This Yale 82DMGPB has a hardened Case Finish in Dark Metallic Grey and the Cylinder is finished in Polished Brass. The lock is covered by a 2 Year Guarantee and has a standard Security Rating.
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass Finish (Striking Plate Security box type, finished to match forend) Case Size: 76mm x 102mm (3in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Visi
UNION's basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality. The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike. The latch is made from nylon for a quieter closing action.Finish: Polished Brass.Case size: 65mm (2.5 inch).Backset: 45mm.
Yale Doormaster™ Adjustable is a high-security lock designed to replace up to 90% of PVCu door locks with top and bottom hooks or bolts, a 35mm backset, and a 16mm faceplate. Its adjustable design utilises the latest patented technology from Yale to ensure the lock is installer friendly, making it the ideal choice where a higher level of security on a PVCu door is required. 3 hooks ensure high security and anti-separation. Adjustable rollers create a weather tight seal to protect the interior of a house from the elements. The Yale Doormaster™ Adjustable is supplied with pre-assembled keeps using the patented 'Uni-packer' system for fast, easy, and reliable installation. Tested to Police Approved Secured By Design standard and PAS 24 door set capable. 10 year guarantee.
Yale's maximum security BS1 nightlatches are British Standard approved to ensure the highest level of security for timber external doors. They are Kitemarked to BS 3621:2007 and are recommended by insurance companies. These security nightlatches have been approved by the Police Secured by Design initiative. The Yale lock is key operated from the outside and both key and lever handle operation from the inside with the internal handle being lockable for increased security. The latch automatically deadlocks on closing the door and the snib function enables the latch to be held back. The lock uses a 6 pin high performance cylinder, and has a 20mm bolt which is anti-carding. It also has a 15 year guarantee. The BS1 nightlatches have a 60mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a glass panelled door Case Width: 90mmCase Height: 90mm Case Depth: 33mmThis Yale PBS1CH has a hardened case finished in polished chrome and the cylinder is also finished in Polished ChromeSupplied with 2 x keys
Union 2200R Rebate sets used to convert a 2200 Union StrongBOLT mortice lock into a full rebated lock. To suit: minimum door thickness 44mm.Size: 13mm 0.5in Finish: Satin ChromeBoxed
The Union 2177 3 lever mortice deadlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side, and has a 12.5mm anti-saw deadbolt. The striking plate is finished to match the forend. Deadbolt Brass, with hardened steel rollersRebate Kit 2969 (13mm, 19mm or 25mm)Keying Groups May be supplied to pass, differ and keyed alike with 2077, 2157, 2277 and 2477Supplied with 2 steel nickel plated keysKeying 100 standard differs (numbers from M101M to M200M) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Polished Brass (Striking Plate Security box type, finished to match forend) Case Size: 77.5mm x 70mm (3 in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Pack: Boxed
Yale's high security P2 double security nightlatches are suitable for timber external doors and are ideal for glass panelled doors. The lock is key operated from the outside and both key and lever handle operation from the inside. The internal handle is lockable for increased security. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The lock uses a 6 pin high performance cylinder, and has a 20mm bolt which is anti-carding. It also has a 2 year guarantee. The P2 double security nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door. Supplied with 1109 external cylinder. Case Width: 60mmCase Height: 88mmCase Depth: 30mm.Yale P2CHNL has a hardened case finished in Polished ChromeSupplied with 2 x keysSecurity Rating: High
The Union 2201 5 lever sashlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The 12.5mm anti-saw deadbolt is locked or unlocked by the key from either side with the latch bolt withdrawn by a lever handle from either side. The latchbolt is easily reversible from outside of case. The 2201 is supplied with covered escutcheon to match forend with the striking plate finished to match forend. The lock is also pierced to accept bolt through furniture. Deadbolt Brass, with hardened steel rollersRebate Kit 2989 (13, 19 or 25mm sizes)Keying 600 standard differs (keys are not numbered for security purposes) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Satin Chrome (Striking Plate Security box type, finished to match forend)Case Size: 77.5mm x 108mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Visi Pack
The Union 2177 3 lever mortice deadlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side, and has a 12.5mm anti-saw deadbolt. The striking plate is finished to match the forend. Deadbolt Brass, with hardened steel rollersRebate Kit 2969 (13mm, 19mm or 25mm)Keying Groups May be supplied to pass, differ and keyed alike with 2077, 2157, 2277 and 2477Supplied with 2 steel nickel plated keysKeying 100 standard differs (numbers from M101M to M200M) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Satin Chrome (Striking Plate Security box type, finished to match forend)Case Size: 77.5mm x 70mm (3 in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Pack: Boxed
UNION's basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality. The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike. The latch is made from nylon for a quieter closing action.Finish: Zinc plated.Case size: 65mm (2.5 inch).Backset: 45mm.
The Yale 85 series deadlocking standard nightlatch security locks are some of the most widely-used front door latches. They are key operated from the outside and lever handle operated from the inside. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The inside handle can also be deadlocked by a reverse turn of the key in the cylinder giving additional security (when deadlocked in this manner the latch cannot be opened from the inside only from the outside with the key) Supplied with 1109 Cylinder. The 85 series security nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door.This Yale P85DMGSC has a hardened Case Finish in Dark Metallic Grey and the Cylinder is Finished in Satin Chrome. The lock is covered by a 2 Year Guarantee and has a High Security Rating. Pack: Boxed
The Yale 89 series deadlocking standard nightlatch security locks are some of the most widely-used front door latches. They are key operated from the outside and lever handle operated from the inside. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The inside handle can also be deadlocked by a reverse turn of the key in the cylinder giving additional security (when deadlocked in this manner the latch cannot be opened from the inside, only from the outside with the key). Supplied with 1109 Cylinder. The 89 series security nightlatches have a 60mm backset, this is the measurement from the edge of the door to the centre of the keyhole.This Yale 89DMGPB has a hardened Case Finish in Dark Metalic Grey and the Cylinder is Finished in Polished Brass. The lock is covered by a 2 Year Guarantee and has a High Security Rating.Pack: Boxed
Union's StrongBOLT 5 Lever Mortice Deadlocks have a radius inner forend for ease of installation. They can be installed in many UK mortices without the need for additional carpentry or spoiling the edge of the door. The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing. The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 20mm for secure positive deadlocking and additional resistance against attack. 2105S can be keyed alike with 2205S.Forend finish: Stainless steel.Case size: 81 x 89mm.Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole.
The Union StrongBOLT Mortice Bathroom Locks feature an easily reversible radius latch that uses the unique UNION SwitchLatch technology, meaning that the latch can be reversed without the need for tools. The anti-rattle adjustable strike enables on site fine tuning. The plastic splinter guard and radius inner forend allows easy installation and a professional finish. The lock has a chamfered bolt design to increase its performance under side load testing and makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and hardened steel pins provide resistance to attack from sawing. The 14mm deadbolt provides secure positive deadlocking and additional resistance against attack. It can be locked or unlocked by the cylinder from either sideThe Union Mortice Bathroom locks can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.Forend finish: Polished brass. Case size: 68 x 109.6mm. Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.Finish: Silver EnamelCase Size: 64mmBackset: 44.5mmBoxed
Union's StrongBOLT 5 Lever Mortice Sashlock feature an innovative, easily reversible radius latch that uses the Union SwitchLatch technology, meaning that no tools are required. This is both simple to use and time-saving. The sashlocks have a radius inner forend for ease of installation. They can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door. The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing. The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 20mm for secure positive deadlocking and additional resistance against attack. 2205S can be keyed alike with 2105S.Forend finish: Polished brass. Case size: 81 x 109.6mm. Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
Union's StrongBOLT 3 Lever Mortice Deadlocks have plastic splinter guards for easy installation and a professional finish. In addition, the radius inner forend aids ease of installation. They can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door. The chamfered bolt design increases the performance of the lock under side load testing and also makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and the hardened steel pins provide resistance to attack from sawing. The deadbolt can be locked or unlocked by the key from either side. This deadbolt measures 14mm for secure positive deadlocking and additional resistance against attack. 2103S can be keyed alike with 2203S.Forend finish: Stainless steel.Case size: 68mm x 89mm.Backset: 45mm. This is the measurement from the edge of the door to the centre of the keyhole.
