The DEWALT DWE490 230mm Angle Grinder has an abrasion protected motor for increased durability. The two position side handle allows the user to optimise the handle position to give maximum comfort. The grinder has a brush window for quick brush replacement and a spindle lock for quick wheel changes. Supplied with: 1 x Protective Guard, 1 x Side Handle, 1 x Inner & Outer Disc Flanges and 1 x Spanner. Specification Input Power: 2,000 Watt. No Load Speed: 6,600/min.Max. Disc Diameter: 230mm.Spindle Thread: M14.Length: 490mm.Height: 151mm.Weight: 5.2kg.
The DEWALT Surface Grinding Shroud allows the collection of harmfull dust during surface grinding applications. It attaches directly to 115mm or 125mm DEWALT Grinders with a keyless clamp. The shroud's sliding section allows access to corners and surfacing to edges. It is AIRLOCK compatable for a quick, locking attachment to a vacuum hose.
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206-LX 115mm Mini Grinder 1010W 110 Volt Version.
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to the button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti-vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206K-LX115mm Mini Grinder With Kitbox 1010 Watt 110 Volt Version
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to the button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti-vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206K-GB 115mm Mini Grinder With Kit box 1010 Watt 240 Volt Version
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206-GB 115mm Mini Grinder 1010 Watt 240 Volt Version.
The DEWALT DWE315KT corded Multi Tool has a powerful 300 Watt motor and superior ergonomics to offer comfortable use. For ease of use, it features quick accessory change and adjustment, requiring no Hex Key. The variable speed trigger provides ultimate control. It is supplied with a tough, durable T-STAK Kit box, and a 37-piece accessory set that contains: 1 x Oscillating Wood with Nails Blade.1 x Oscillating Fastcut Wood Blade.1 x Oscillating Wood Detail Blade.1 x Oscillating Semi Circle Wood Blade.1 x Oscillating Semi Circle Grout Removal Blade.1 x Oscillating Rigid Scraper.1 x Oscillating Sanding Plate.25 x Sanding Sheets (Assorted Grades).1 x Universal Adaptor.2 x Hex Keys: 3mm and 5mm.1 x Dust Extraction Adaptor.1 x Depth stop / straight cut guide.1 x T-Stak Kit Box. Specifications: Input Power: 300 Watt.No Load Speed: 0-22,000/min.Weight: 1.5kg.DEWALT DWE315KT Multi-Tool Quick Change Kit & TSTAK 300 Watt 240 Volt Version.
The DEWALT DWE315B Corded Multi-Tool is fitted with a powerful motor and a variable speed trigger for complete control. For ease of use, it features quick accessory change and adjustment, no hex key required. The body features superior ergonomics, the soft comfort grip helps to reduce user fatigue whilst improving control. It is supplied with a 37 piece accessory set that contains: 1 x Rigid Scraper1 x Sanding Plate25 x Sanding Sheets (Assorted Grades)1 x Universal Adaptor2 x Hex Keys: 3mm and 5mm1 x Dust Extraction Adaptor1 x Depth Stop/Straight Cut Guide1 x Tool Bag Specification: Input Power: 300WNo Load Speed: 0-22,000/min.Weight: 1.5kg
The DEWALT DW305PK Reciprocating Saw is fitted with a motor that has been specifically designed for heavy-duty applications, a 4 position blade clamp allows for flush cutting and increased versatility. It has a 29mm stroke length, the DWE305PK delivers excellent cutting performance. There is a lever-action keyless blade clamp for quick and easy blade changing. The saw is ideal for plumbers, electricians, heating, HVAC , and builders. Supplied with a heavy-duty carrying case. Specification Input Power: 1,100 Watt.No Load Speed: 0-2,800/min. Stroke Length: 29mm.Capacity: Wood: 280mm, Steel Sections & Pipes: 100mm, PVC: 130mm.Length: 435mm.Height: 178mm.Weight: 3.5kg.The DEWALT DW305PKL Reciprocating Saw 1100 Watt 110 Volt Version.
The DEWALT 100 Metre DW03101 Laser Distance Measure calculates area and volume with automatic calculations that make job estimates quick and easy. It has an additional triangular area function. The integrated inclinometer can be used as a digital level to calculate continuous height and indirect horizontal distances. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isn’t accessible for linear measurement. The laser distance measure has a large 3-line backlit display which helps to improve screen visibility in both dim and bright conditions. It features a memory unit that stores last 20 measurements. A multifunctional end piece folds at 90 degrees for edge measurements and extends 180 degrees for measurements from corners. Durable design with over-molded housing, which has been 6 ft (2m) drop tested, and is IP65 water/debris resistant. Specification Accuracy: ±1mm.Operating Range: 100m (330ft).Power Supply: 2 x 1.5 Volt LR03 (AAA-size) ;Batteries (supplied).
DEWALT DW03050 50 Metre Laser Distance Measure 50M calculates area and volume with automatic calculations that make job estimates quick and easy. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isn’t accessible for linear measurement. The laser distance measure features a memory unit that stores the last 5 measurements, and a 2-Line backlit display helps improve screen visibility in both dim and bright conditions. It has a durable design with over-molded housing, which has been 6 ft (2m) drop tested, and is IP65 water/debris resistant. Specification Accuracy: ±1.5mm.Operating Range: 50m (165ft).Power Supply: 2 x 1.5 Volt LR03 (AAA-size) Batteries (supplied).
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3137 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3135 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3133 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3127 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 5.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3117 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 240.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3115 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3113 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 10.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3105 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 5.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3107 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 240.Pack quantity: 5.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3103 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 5.
The DEWALT DT99593 FlexVolt XR HSS Wood Blades have been specially designed for fast cutting of hard wood, soft wood, hardboard, plasterboard, fibreboard and logs with a medium finish. DO NOT USE on masonry, concrete or metal. Their extreme runtime design enhances durability doubling the blades life span. Compatible with the DEWALT FlexVolt Alligator Saw 54 Volt. Can also be used with other DEWALT Models: DWE397, DWE398 & DWE399.
The DEWALT DT99591 FlexVolt XR Poroton Blades are well suited to the cutting of standard class 12 clay blocks as well as various other materials such as general masonry, concrete and block. Their extreme runtime design enhances durability doubling the blades life span. Compatible with the DEWALT FlexVolt Alligator Saw 54 Volt. Can also be used with other DEWALT Models: DWE397, DWE398 & DWE399.
The DEWALT DT99551 FlexVolt XR Reciprocating Blade 8 Piece Set contains a selection of bi-metal blades, that are coated in a special Toughcoat finish which reduces the build up of heat, improving cutting performance and speed up to twice as much as market competitors. Suitable for applications such as cutting woods, particle boards, metals, piping, plastics, PVCs and more. Contains the following: 3 x DT99554 FlexVolt Xtreme Runtime Wood Reciprocating Blades 152mm 4/6 TPI. 1 x DT99555 FlexVolt Xtreme Runtime Wood Reciprocating Blades 230mm 4/6 TPI. 3 x DT99553 FlexVolt Xtreme Runtime Metal Reciprocating Blades 152mm 14/18 TPI. 1 x DT99552 FlexVolt Xtreme Runtime Metal Reciprocating Blade 203mm 14/18 TPI. 1 x ToughCase Blade Carry Case.
The DEWALT DT99550 FlexVolt XR Reciprocating Saw Blade Set 13 Piece contains a mixture of blade types for a wide range of cutting jobs and is supplied in a hassle-free, re-usable storage case that quickly and easily adjusts to suit the blade lengths. Contains 4/6 TPI and 14/18 TPI blades, each comes in 2 lengths suitable for their purpose. The 4/6 TPI saw blades come in lengths 152mm and 230mm for wood cutting and the 14/18 TPI saw blades come in 152mm and 203mm for metal cutting. The blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. These blades are suitable for cutting applications in wood, particle board, metal, piping, plastic, PVC and more. Part of the DEWALT FlexVolt XR Series of accessories Contains the following: 2 x DT99555 FlexVolt XR Reciprocating Wood Saw Blades 230mm 4/6 TPI. 2 x DT99552 FlexVolt XR Reciprocating Metal Saw Blades 203mm 14/18 TPI. 4 x DT99553 FlexVolt XR Reciprocating Metal Saw Blades 152mm 14/18 TPI. 5 x DT99554 FlexVolt XR Reciprocating Wood Saw Blades 152mm 4/6 TPI. 1 x Blade Carry Case.
The DEWALT DT9398 SDS Plus Drill Bit Set Display contains 12 x SDS Plus Drill Bit Sets. Each set contains 5 pieces (3 x 5.5mm and 2 x 7mm). The bits are suitable for drilling in masonry and brick.
The DEWALT Extreme Diamond Cutting Blade has a 3 x 12mm diamond segment with an aggressive cut pattern giving faster cuts and longer blade life. With an optimised wheel edge design for better debris removal. For cutting through concrete and masonry materials, wet or dry conditions. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw.This DEWALT Extreme Wet & Dry Use Diamond Blade has the following specification: Diameter: 125mmBore Size: 22.23mmSegment Height: 12mmSegment Thickness: 2.6mmMax. rpm: 12,250/min.
Bandsaw Blade for general purpose rips and cross-cuts in wood and wood composites.The specially hardened teeth maintain an ultra sharp edge giving an excellent finish to the work.To fit DEWALT DW738 and DW739 Bandsaws. Blade Length: 2,095mm.Blade Width: 12.0mm.Tooth Pitch: 4.2mm.
The DEWALT DT7507 9 Piece 1/2in Drive Impact Socket Set is manufactured to highest standards to ensure application durability. With black oxide finish and laser marking. Contains the following: 8 x 1/2in Impact Sockets: 10, 13, 15, 17, 19, 22, 24 & 27mm.1 x 1/4in to 1/2in Adaptor.
The DEWALT DT7506 Impact Socket Set is manufactured to highest standards to ensure application durability. The sockets have a black oxide finish with lasered markings, making it easy to locate the correct size quickly. Supplied in a handy carry case, contains the following: 16 x Impact Sockets: 6, 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20, 21, 22, 24, 27mm1 x 1/4in to 1/2in Adaptor
The DEWALT DT71517T-QZ Right Angle Torsion Drill Attachment is durable and has a compact design that allows it to fit in tight spaces where work is difficult to perform and is perfect for driving screws and drilling holes at awkward angles. It is ideal for cordless drills and accepts standard 1/4in hex shank accessories. Torsion bits have a Flexible Torsion Zone that absorbs torque peaks and reduces breakage. Includes the following: 3 x 25mm Pozidriv Bits: PZ2.2 x 25mm Phillips Bits: PH2.4 x 25mm Torx Bits: T10, T15, T20 & T25.
The DEWALT DT70706 Drill Drive Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 2 x 25mm Phillips Bits: PH2(x2)7 x 25mm Pozi Bits: PZ2(x5) & PZ3(x2)6 x 25mm TORX Bits: T10, T15, T20, T25(x2) & T30 1 x 50mm Phillips Bit: PH22 x 50mm Pozi Bits: PZ2 & PZ31 x 50mm TORX Bit: T25 4 x Metal Drill Bits: 3, 4, 5 & 6mm 1 x Socket Driver 10mm1 x Compact Magnetic Drive Guide Plus a Thermal Mug Supplied as a Display of 4.
The DEWALT DT70621T Tic-Tac Bits With Holder Display contains: 21 x Extreme Impact Torsion PZ2 25mm Tic Tac Boxes. Each Tic Tac contains 25 Impact Torsion Pozi Bits. They have a 15° torsion zone that allows the screw driver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. 21 x Magnetic Bit Holders.
The DEWALT DT70619T Impact Right Angle Drill Attachment allows access to tight spaces, for drilling and screwing in corners and at difficult angles. Fitted with a magnetic bit holder and supplied with a selection of DEWALT impact torsion bits. 8 x 25mm Impact Torsion Bits: PH2(2), PZ2(2), T10, T15, T20 and T25.
DEWALT DW23700 professional Circular Saw with a high power, durable motor delivers excellent power even at maximum depth of cut. It has optimum balance for safe, fatigue-free operation, an additional handle for safe two-handed work. It also has a steel shoe for added durability, a stable block construction for low vibration running and long service life, protection hood for sawdust extraction, spindle lock for ease of blade change and variable adjustment of the mitre angle to 45° for added versatility. Supplied with: 1 x Precision 24 Tooth TCT Saw Blade, 1 x Rip Fence and 1 x Blade Spanner. Specification Input Power: 1,750 Watt.No Load Speed: 4,700/min.Max Cutting Depth:@90°: 86mm, @45°: 62mm.Blade: 235x30mm Bore, 24 Tooth TCT.Bevel Capacity: 45 °. Weight: 8.2kg.DEWALT DW23700 Circular Saw 235mm 86mm DOC 110 Volt.
