The DEWALT DCS373 XR Metal Cutting Circular Saw has an extremely durable tool design with a steel shoe that has been designed to withstand rough job site conditions. An intelligent trigger allows total control over all applications. The lock off switch and electronic motor brake provide additional control and work safety. Fitted with a spindle lock for quick and easy blade change. The transparent front guard LED light and unique chemically treated glass window provide enhanced line of cut visibility. The saw has an ergonomic design and rubber grip increase comfort. Supplied as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,700/min.Max. Cutting Depth: @90° 43mmBlade: 140 x 20mm BoreWeight: 3.1kg
The DEWALT DCS371 Compact Bandsaw is ideally suited for cutting lengths of metal, including threaded rod, unistrut and steel pipework. It creates little or no sparks when cutting metal and provides smooth cuts leaving surfaces burr-free. The bandsaw is well balanced and easy to handle in all orientations including overhead. Bare Unit, No Battery or Charger Supplied. Supplied with: 1 x Variable Pitch Bi-Metal Blade 14/18 TPI, 1 x Hang Hook and 1 x TSTAK VI Heavy-Duty Ktibox. No Load Speed: 174/min.Cutting Capacity: 63mm.Size (HxL): 280 x 385mm.Weight: 3.9kg.
The DEWALT DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to its central motor position. With a four position blade clamp that allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. Ideal for wood and metal installation trimming and demolition cutting applications. Bare Unit, No Battery Or Charger Supplied. Specification No Load Speed: 0-2,900/Min. Stroke Length: 28.6mm.Capacity: Wood: 300mm, Steel Sections & Pipes: 100mm, PVC: 160mm.Length: 363mm. Height: 203mm.Weight: 2.3kg.
The DEWALT DCS365 Cordless XPS Mitre Saw is fitted with a double insulated 65mm fan cooled motor with replaceable brushes for maximum power in hard wood. The mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60° right and 0 and 50° left. It has a large dual sliding fence mechanism that gives maximum support in large material cuts at any angle or combination of angles. Horizontal rails create additional capacity for larger materials. The aluminium base construction provides stability to the saw while still retaining its portability. With mitre and bevel angle detents for quick and easy set up of the saw. DCS365M2: 2 x 18V 4.0Ah XR Li-ion BatteriesDCS365N: Bare Unit, No Battery or Charger Supplied Specification No Load Speed: 3,750/min.Blade: 184 x 16mm BoreCapacity (mm): 90°/90°: 250x50, 90°/45°: 250x35, 45°/90°: 176 x 50, 45°/45°: 176x35Mitre Cut (Right/Left): 48°/48°Bevel Capacity (Left): 48°Weight: 11.5kgThe DEWALT DCS365N Cordless XPS 184mm Mitre Saw is supplied as a Bare Unit, NO battery or charger supplied.
The DEWALT DCS365 Cordless XPS Mitre Saw is fitted with a double insulated 65mm fan cooled motor with replaceable brushes for maximum power in hard wood. The mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60° right and 0 and 50° left. It has a large dual sliding fence mechanism that gives maximum support in large material cuts at any angle or combination of angles. Horizontal rails create additional capacity for larger materials. The aluminium base construction provides stability to the saw while still retaining its portability. With mitre and bevel angle detents for quick and easy set up of the saw. DCS365M2: 2 x 18V 4.0Ah XR Li-ion BatteriesDCS365N: Bare Unit, No Battery or Charger Supplied Specification No Load Speed: 3,750/min.Blade: 184 x 16mm BoreCapacity (mm): 90°/90°: 250x50, 90°/45°: 250x35, 45°/90°: 176 x 50, 45°/45°: 176x35Mitre Cut (Right/Left): 48°/48°Bevel Capacity (Left): 48°Weight: 11.5kgThe DEWALT DCS365M2 Cordless XPS Mitre Saw is supplied with the following: 2 x 18V 4.0Ah XR Li-ion Batteries. 1 x Charger
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgThe DEWALT DCS355P1 XR Brushless Oscillating Multi-Tool is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x Multi-Voltage XR Charger1 x TSTAK™ Kitbox
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgDEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit. Supplied WITHOUT batteries or a charger.
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgThe DEWALT DCS355M2 XR Brushless Oscillating Multi-Tool is supplied with: 2 x 18V 4.0Ah XR Li-ion Batteries1 x 43mm Fast Cut Wood Blade1 x 43mm Woods with Nails Blade1 x Rigid Scraper Blade1 x Semi Circle Blade1 x Carbide Grout Removal Blade1 x Wood Detail Blade1 x Sanding Pad25 x Assorted Sandpaper Sheets1 x Depth Control Straight Cut Guide1 x Dust Extraction Adpator1 x Universal Blade Adaptor1 x Multi-Voltage XR Charger1 x TSTAK™ Kitbox
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgThe DEWALT DCS355M1 XR Brushless Oscillating Tool is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x 43mm Fast Cut Wood Blade1 x 43mm Woods With Nails Blade1 x Rigid Scraper Blade1 x Semi Circle Blade1 x Carbide Grout Removal Blade1 x Wood Detail Blade1 x Sanding Pad25 x Assorted Sandpaper Sheets1 x Depth Control Straight Cut Guide1 x Dust Extraction Adaptor1 x Universal Blade Adaptor1 x Multi-Voltage XR Li-Ion Charger1 x TSTAK™ Kitbox
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgThe DEWALT DCS355M2 XR Brushless Oscillating Multi-Tool is supplied with: 2 x 2.0Ah XR Li-ion Batteries1 x 43mm Fast Cut Wood Blade1 x 43mm Wood with Nails Blade1 x Rigid Scraper Blade1 x Semi Circle Blade1 x Carbide Grout Removal Blade1 x Wood Detail Blade1 x Sanding Pad25 x Sheets Assorted Sanding Paper1 x Dust Extraction Adaptor1 x Depth Control Straight Cutting Guide1 x Universal Blade Adaptor1 x Multi-Voltage XR Charger1 x TSTAK™ Kitbox
The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. DCS355P1: 1 x 18V 5.0Ah Li-ion BatteryDCS355M2: 2 x 18V 4.0Ah Li-ion BatteriesDCS355M1: 1 x 18V 4.0Ah Li-ion BatteryDCS355D2: 2 x 18V 2.0Ah Li-ion BatteriesDCS355D1: 1 x 18V 2.0Ah Li-ion BatteryDCS355N: Bare Unit, No Battery or Charger Specification: No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kgDEWALT DCS355D1 XR Brushless Oscillating Multi-Tool is supplied with: 1 x 18V 2.0Ah Li-Ion Battery1 x Multi-Voltage XR Charger1 x TSTAK™ Kitbox
The DEWALT DCS350 XR Threaded Rod Cutter has been designed as a dedicated tool for cutting threaded rod. Cuts rods with a shearing force, minimising the risk of burring on a cut. There is no moving blade, no sparks and no metal chips. Accessories can be changed by using the on-board hexagon key and there is also an LED for visibilty in dark areas. Supplied with a Metric Cutting Die M6-M12. Bare Unit, No Battery or Charger Supplied. Specification Cutters: M6, M8, M10 & M12.Weight: 4.1kg.
The DEWALT DCS335 XR Brushless Body Grip Jigsaw has a 4-position pendulum action, allowing the user to control the aggressiveness or smoothness of the cut. Tool-free bevel adjustment and clamp lock for fast and secure adjustment. It has the same cutting capabilities as top handled jigsaws but is better for cutting in tight or confined spaces and cutting at unconventional angles. Ideal for professional carpenters, joiners and woodworkers. Bare Unit, No Battery or Charger Supplied. Specification: Strokes No Load: 1,000-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Aluminium 57mm
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. It's 3-position pendulum action controls the aggressiveness or smoothness of cuts. The tool free adjustable shoe with anti-scratch cover bevels 45°, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. It's modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris. DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries. DCS331N: Bare Unit, No Battery or Charger. Specification Strokes No Load: 0-3,000/min.Stroke Length: 26mm.Bevel Capacity: 45°.Capacity: Wood: 135mm, Metal: 10mm.The DEWALT DCS331N XR Premium Cordless Jigsaw 18 Volt is supplied as a Bare Unit, NO battery or charger supplied.
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. It's 3-position pendulum action controls the aggressiveness or smoothness of cuts. The tool free adjustable shoe with anti-scratch cover bevels 45°, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. It's modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris. DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries. DCS331N: Bare Unit, No Battery or Charger. Specification Strokes No Load: 0-3,000/min.Stroke Length: 26mm.Bevel Capacity: 45°.Capacity: Wood: 135mm, Metal: 10mm.The DEWALT DCS331M2 XR Premium Jigsaw 18V is supplied with: 2 x 18V 4.0Ah Li-ion Batteries.1 x Anti-Scratch Shoe Cover1 x Dust Port1 x Multi-Voltage Li-ion Charger1 x Heavy-Duty Kit Box
The DEWALT DCS310XR Compact Reciprocating Saw is part of the XR Lithium Ion range, designed for efficiency. It has an adjustable, 3-position pivoting handle, which provides the user with flexibility to work in confined spaces. Its compact, lightweight design, ergonomic handle and rubber overmould provide ultimate comfort. The saw has a lever action keyless blade clamp for quick and easy blade change and a parabolic switch profile which allows greater control of application. SpecificationsVoltage: 10.8V.Battery Capacity: 2.0 Ah.Power Output: 140 Watts.No Load Stroke Rate: 0-2,700/min.Stroke Length 14 mm.Length: 255 mm.Height: 230 mm.Weight: 1.4 kg.DEWALT DCS310D2 10.8 Volt Compact Pivot Reciprocating Saw with 2 x 2.0Ah Li-Ion
The DEWALT DCR020 Digital Radio is a compact and robust DAB(+)/FM jobsite radio and can be powered by mains or by DEWALT 10.8-18 Volt XR Li-Ion batteries. The Tech Box, on-board storage protects portable audio devices and is fitted with a 3.5mm auxiliary port and a USB port that allows devices to be charged (USB charging AC only). The radio has an integral roll cage that provides impact resistance for maximum durability and a 1.8m powercord with wrap-around storage. PLEASE NOTE: This unit is a radio only and NOT suitable for charging. Bare Unit, No Battery Supplied. Specification Radio Range: DAB(+)/FM.Input Power: Battery: 10.8-18v Li-Ion, DC: 230/240v.Length: 240mm.Height: 245mm.Weight: 2.8kg.
The DEWALT DCR017 DAB radio charger has a DAB+ and FM tuner to receive digital and analogue radio signals. It is also a multi-voltage XR charger (with charge indicator LED light) which accepts DEWALT 10.8 Volt, 14.4 Volt and 18 Volt XR Li-Ion batteries. It has two AC power outlets which offer more versatility for jobsite power, a tech Box which provides protection and storage for smaller items. It is also fitted with a USB port in the Tech Box for device charging (when the DCR017 is connected to mains). It also has a 3.5mm auxiliary port which allows for connection to portable audio devices. The blow moulded roll cage has 6 impact resistance points for maximum durability, twin sets of woofers and tweeters with ported bass for high fidelity audio and is supplied with a 2 metre power cord with wrap-around cord storage. Specification Radio Range: DAB (+) / FM.Input Power: Battery: 10.8-18v Li-Ion, DC: 230/240v.Charging Time: 45-120min.Length: 420mm.Height: 310mm.Weight: 5.9kg.DEWALT DCR017 XR DAB Radio & Charger 240 Version. Bare Unit, no battery supplied with this radio.
The DEWALT DCR011-XJ 10.8V / 18V / 54V Bluetooth® Speaker produces high-fidelity audio out of the high-quality speakers. The bass port maximises bass and range, and the Bluetooth® carries a range of up to 30m. You can stream audio from a mobile or plug-in directly with an aux cable. The carry handle and hang system, along with an over moulded side bumper and a metal speaker grill, gives the DCR011-XJ Bluetooth® Speaker portability and durability for transport and use on the site. The DCR011-XJ is compatible with DEWALT's full range of 10.8V, 18V and 54V batteries and is the perfect speaker for any site, job or tradesman. Bare Unit, No Battery Supplied.
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580P2 XR Brushless Planer is supplied with the following: 2 x 18 Volt 5.0Ah Li-Ion Batteries2 x Tungsten Carbide Tipped Reversible Blades1 x Hex Wrench1 x Torx Key1 x Guide Fence1 x Blade Alignment Plate1 x DWV9390 Dust Bag1 x Multi-Voltage XR Charger1 x Heavy-Duty TSTAK Kitbox
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580N XR Brushless Planer is supplied as a Bare Unit, No Battery or Charger Supplied.
The DEWALT DCN701 XR Electrician's Stapler allows you to work without the need for hoses or cables. It has been specially designed for electricians. Mechanical rather than gas operation offers consistent performance at temperatures between -15°C and 50°C for minimal cleaning/service requirements. Dry fire lockout ensures that the tool is protected from firing without staples in the magazine. With class leading vibration and sound figures, for superb user protection. DCN701D2: 2 x 18V 2.0Ah Li-ion BatteriesDCN701N: Bare Unit, No Battery or Charger Specification: Magazine Capacity: 35 StaplesStaple Diameter: 1mmStaple Length: 25.4mmMagazine Angle: 0°Weight: 2.1kgThe DEWALT DCN701N XR Electrician's Stapler is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCN701 XR Electrician's Stapler allows you to work without the need for hoses or cables. It has been specially designed for electricians. Mechanical rather than gas operation offers consistent performance at temperatures between -15°C and 50°C for minimal cleaning/service requirements. Dry fire lockout ensures that the tool is protected from firing without staples in the magazine. With class leading vibration and sound figures, for superb user protection. DCN701D2: 2 x 18V 2.0Ah Li-ion BatteriesDCN701N: Bare Unit, No Battery or Charger Specification: Magazine Capacity: 35 StaplesStaple Diameter: 1mmStaple Length: 25.4mmMagazine Angle: 0°Weight: 2.1kgThe DEWALT DCN701D2 XR Electrician's Stapler is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Multi-Voltage Charger1 x TSTAK VI Carry Case
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specification Input Power: 18 Volt.Nail Diameter: 2.8-3.3mm.Nail length: 50-90mm.Magazine Capacity: up to 55 nails.Firing mode: Bump and Sequential.Weight: 4.1kg.DEWALT DCN692P2 Cordless XR First Fix Nailer is supplied with the following: 2 x 18 Volt 5.0Ah XR Li-Ion Batteries.1 x Reversible Belt Hook.1 x Non-Mar Tip.1 x Multi-Voltage XR Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specification Input Power: 18 Volt.Nail Diameter: 2.8-3.3mm.Nail length: 50-90mm.Magazine Capacity: up to 55 nails.Firing mode: Bump and Sequential.Weight: 4.1kg.DEWALT DCN692N Cordless XR 2 Speed Framing Nailer Bare unit, NO battery or charger supplied.
The DEWALT DCN682 Cordless XR Brushless Floor Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance. Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. DCN682D2: 2 x 18 Volt 2.0Ah Li-ion BatteriesDCN682N: Bare Unit, No Battery or Charger Specifcation: Nail Length: 12-38mm.Nail Diameter: 1.25mm (18Ga).Magazine Capacity: 110 Nails.Magazine Angle: 0°.Weight: 2.9kg.The DEWALT DCN682N XR Brushless 18G Floor Stapler is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCN681 Cordless XR Brushless Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance. Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. DCN681D2: 2 x 18 Volt 2.0Ah Li-ion BatteriesDCN681N: Bare Unit, No Battery or Charger Specifcation: Nail Length: 12-38mm.Nail Diameter: 1.25mm (18Ga).Magazine Capacity: 110 Nails.Magazine Angle: 0°.Weight: 2.6kg.The DEWALT DCN681N XR Brushless 18G Narrow Crown Stapler is supplied as a bare unit, no battery or charger.
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660P2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 5.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.DEWALT DCN660N XR Brushless Second Fix Nailer 18 Volt Bare Unit, No Battery or Charger Supplied.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660D2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 2.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCMW564 Cordless XR Lawn Mower has a brushless motor for less maintenance, more power and lower noise levels. The 51cm metal deck provides additional durability and a 48cm cutting capacity to cover a wide area. The handle is ergonomic in design and ensures easy and comfortable steering. Also fitted with a bottom roller allowing easy and free flowing movement across the ground. There is a power actuation button for easy 'turn on/off' function and a secondary safety switch for added safety. Fitted with a 55L heavy-duty mesh fabric grass collection bag.DCMW564P2: 2 x 18V 5.0Ah Li-ion BatteriesDCMW564RN: Bare Unit, No Battery or ChargerSpecification:Cutting Width: 48cmCutting Height Adjustment: 5 Stages: 25, 38, 57, 74, 86mmGrassbox Capacity: 55LThe DEWALT DCMW564RN XR Brushless Lawnmower is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCMW564 Cordless XR Lawn Mower has a brushless motor for less maintenance, more power and lower noise levels. The 51cm metal deck provides additional durability and a 48cm cutting capacity to cover a wide area. The handle is ergonomic in design and ensures easy and comfortable steering. Also fitted with a bottom roller allowing easy and free flowing movement across the ground. There is a power actuation button for easy 'turn on/off' function and a secondary safety switch for added safety. Fitted with a 55L heavy-duty mesh fabric grass collection bag.DCMW564P2: 2 x 18V 5.0Ah Li-ion BatteriesDCMW564RN: Bare Unit, No Battery or ChargerSpecification:Cutting Width: 48cmCutting Height Adjustment: 5 Stages: 25, 38, 57, 74, 86mmGrassbox Capacity: 55LThe DEWALT DCMW564P2 XR Brushless Lawnmower is supplied with:2 x 18V 5.0Ah Li-ion Batteries1 x DCB115 Charger
The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder. The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up. DCMPS567P1: 1 x 18V 5.0Ah Li-ion BatteryDCMPS567N: Bare Unit, No Battery or Charger Specification: Chain Speed: 6.5 m/sBar Length: 20cmOil Tank Capacity: 115mlWeight: 3.8kgThe DEWALT DCMPS567P1 XR Brushless Pole Saw is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x 20cm Bar and Chain1 x XR Multi-Voltage Charger
The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder. The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up. DCMPS567P1: 1 x 18V 5.0Ah Li-ion BatteryDCMPS567N: Bare Unit, No Battery or Charger Specification: Chain Speed: 6.5 m/sBar Length: 20cmOil Tank Capacity: 115mlWeight: 3.8kgThe DEWALT DCMPS567N XR Brushless Pole Saw is supplied as a Bare Unit, No Battery or Charger supplied.
The DEWALT DCM575 FlexVolt XR Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting. The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain. DCM575X1: 1 x 18/54 Volt 9.0/3.0Ah Li-Ion Battery.DCM575N: Bare Unit, No Battery or Charger. Specification Bar Length: 40cm.Chain Speed: 15m/s. Oil Tank Capacity: 110-120ml.Weight: 5.68kg.The DEWALT DCM575X1 FlexVolt XR Chainsaw is supplied with: 1 x 18/54 Volt 9.0/3.0Ah Li-Ion Battery1 x 8 Amp Li-Ion Charger DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
