This DEWALT SDS Max Chisel Set is made of the highest quality. The quartet of chisels are produced from toughened steel with microprocessor controlled heat treatment for a long-life.Suitable for use with all SDS Max drills with roto-stop.This 2 piece set contains: 1 xFlat Chisel 25 x 400mm. 1 x Point Chisel 400mm.
TheDEWALT DT70784 Accessory Set is perfect to use both on site or at home.Supplied in a TOUGH CASEand, this is part of a connectable case system TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 32 x 25mm Phillips Screwdriver Bits: PH1, PH2(x30), PH3. 32 x 25mm Pozi Screwdriver Bits: PZ1, PZ2(x30), PZ3. 10 x 25mm TORX Screwdriver Bits: T10, T15(x2), T20(x2), T25(x2), T30(x2), T40. 1 x 50mm Phillips Screwdriver Bit: PH2. 1 x 50mm Pozi Screwdriver Bit: PZ2. 6 x HSS-G Black and Gold Metal Drill Bits: 2, 3, 4, 5, 6, 8mm. 7 x Brad Point Drill Bits: 3, 4, 5, 6, 8, 10, 12mm. 2 x 152mm Flat Drill Bits: 22, 25mm. 2 x Socket Adaptors: 1/4in hex - 1/4in square, 1/4inhex - 3/8in square. 4 x Socket Wrenches: 6, 8, 10, 13mm. 1 x Countersink Drill. 1 x Handle Clamp. 1 x Bit Holder with Guide.
TheDEWALT DT70762 Mixed Drill and Bit Setis supplied in a TOUGH CASEand, this is part of a connectable case system TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 5 x Flat Bits (Length: 152mm): 18, 20, 22, 25, 32mm. 6 x Black and Gold HSS Metal Drill Bits: 2, 3, 4, 5, 6, 8mm. 5 x SDS Plus Masonry Drill Bits (Length: 160mm): 5.5, 6.0, 7.0, 8.0, 10.0mm. 6 x 25mm Phillips Screwdriver Bits: PH1, PH2(x4), PH3. 48 x 25mm Pozi Screwdriver Bits: PZ1(x4), PZ2(x40), PZ3(x4). 10 x 25mm TORX Screwdriver Bits: T10, T15, T20(x4), T25(x2), T30, T40. 2 x 50mm Pozi Screwdriver Bits: PZ2. 2 x Nut Setters: 8, 10mm. 1 x Compact Magnetic Drive Guide.
DEWALT DT70747T FlexTORQ Screwdriving Set.Extreme FlexTORQ screwdriver bits are designed to withstand the high forces of today's impact drivers. This significantly reduces the instances of failure when fixing large screws in place.Supplied in a TOUGH CASEand, this is part of a connectable case system TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 1 x 25mmm Phillips Bit: PH2. 4 x 25mm Pozi Screwdriver Bits: PZ1, PZ2(x2), PZ3. 17 x 25mm TORX Screwdriver Bits: T15(x2), T20(x8), T25(x5), T30(x2). 1 x 57mm Phillips Screwdriver Bit: PH2. 1 x 57mm Pozi Screwdriver Bit: PZ2. 5 x 57mm TORX Screwdriver Bits: T10, T20(x2), T25, T30. 1 x 89mm TORX Screwdriver Bit: T20. 1 x 10mm Cleanable Nut Setter. 1 x Magnetic Bit Holder With Torsion Zone.
The DEWALT DT70711 Extreme 2 Metal Drill Drive Set is supplied in a TOUGH CASEand, this is part of a connectable case system which is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 6 x Extreme 2 Metal Drill Bits: 2, 3, 4, 5, 6, 8mm. 3 x 25mm Phillips Screwdriver Bits: PH2(x3). 5 x 25mm Pozi Screwdriver Bits: PZ2(x4), PZ3. 1 x 50mm Phillips Screwdriver Bits: PH2. 2 x 50mm Pozi Screwdriver Bits: PZ2(x2). 1 x Magnetic Bit Holder. 1 x Magnetic Drive Guide.
DEWALT SDS-Plus Drill Bits are suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. The 2 flute helix has been specially developed for efficient removal of dust. There is also an optimised carbide tip drill head with 2 cutting edges. This 8 piece Set contains the following sizes:6mm(x2), 7mm(x2), 8mm(x2), 10mm(x2) Specification: Overall Length: 160mm Working Length: 92mm
The DEWALT DCW620H2 1/2in Plunge Router has a powerful and efficient brushless motor, giving extended run-time and providing long service life. Variable speed settings make it ideal for a wide range of available cutters/materials. Maintains constant speed under increased loads. Doesn’t slow down in tough applications so maintains quality of surface finish. It offers a deep plunge capacity (70mm), giving you the ability to complete applications requiring deeper plunge. A plunge lock lever provides accuracy and consistency. Quickly lock plunge when applying force to the router. The trigger depth lock eliminates downward force during depth lock operation. Lock depth with one touch trigger. The guide bush centring system provides greater accuracy when using bush guided jigs and fixtures. Ensuring concentricity of cutter and bush. Over moulded handles reduce user fatigue and increase comfort. It also features an ergonomic trigger switch with lock-on/lock-off. This makes it easy to start/stop the unit and to lock-on if required for extended applications. Its compact, lightweight design, only 3.5kg (without battery), increases control/manoeuvrability and reduces fatigue during longer applications. Compatible with common guide bushes. Users are able to easily source many key bush sizes and use existing systems. Specifications: Collet Capacity: 12mm, 1/2in, 8mm, 1/4in, 6mm. No Load Speed: 11,000-23,000/min. Plunge Depth: 70mm. Weight: 3.5kg (exc. battery). Supplied with: 2 x 18V 5.0Ah POWERSTACK™ Slide Batteries, 1 x DCB1104 Charger, 2 x Collets (1/4inand 1/2in), 1 x1/2in Collet, 1 x30mm Guide Bush, 1 x Side Fence, 1 x Cantering Cone, 2 x Sub-bases (Guide Bush and Larger Aperture), 1 x Under Base Dust Chute and 1 x Deep TSTAK™.
The DEWALT DCN694 XR Metal Connector Nailer is a cordless gas free solution for working with timber frame metal connector brackets. Powered by a powerful brushless motor and DEWALT 18V XR battery technology. Rapid Cycle Sequential mode offers all of the speed of 'bump' mode, for use in areas where only Sequential tools can be used. Its two speeds allows for firing all lengths of nails. Its versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The ergonomic tool design allows the nailer to fit easily between a 400mm centre stud. With increased visibility and durability along with protection for work-surfaces from the non-mar contact-trip. The hole alignment pin finds the hole quickly and positions the tool securely to ensure you hit the hole every time. Tool free stall/jam clearance minimises user down time. Dry fire lockout also ensures the tool is protected from firing without nails in the magazine. The user can engage contact trip lock-off and prevent accidental discharge of fastener. Supplied with a reversable belt/rafter hook for increased portability and versatility on the job-site. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Nail Diameter: 3.4-4mm. Nail length: 35mm. Magazine Capacity: 27 nails. Weight: 3.6kg.
The DEWALT DCK2062P2TTwin Pack, contains the following: 1 x 18V DCD709 XR Compact Hammer Drill Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. 15 position adjustable torque control provides consistent screw driving into a variety of materials. The 65Nm torque allows you to achieve tough applications. There is also a foot LED with delay feature for better workpiece illumination. Chuck: 13mm. No Load Speed: 0-450/0-1,650/min. Impact Rate: 0-7,650/0-28,050/min. Max Torque: 65Nm. Capacity: Wood 30mm, Steel 13mm, Masonry 13mm. 1 x 18V DCF809 XR Impact Driver with an efficient brushless motor delivering high performance, extends tool life and allows for a much shorter design. Delivers 190Nm of torque for the toughest of applications and extended runtime. Fitted with a 'Drop and Load' bit holder for one-handed operation. Bit Holder: 6.35mm (1/4in). No Load Speed: 0-2,800/min. Impact Rate: 0-3,200/bpm. Max Torque: 190Nm. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion. Charging Current: 4.0 A. Also supplied with:2 x 18V 5.0Ah Batteries and 1 x TSTAK Carry Case.
The DEWALT DCF860 E2T XR Impact Driver has a brushless motor which delivers high performance, extends tool life and allows for a much shorter design. Fitted with a Drop and Load bit holder for easy, one-handed operation. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode. Supplied with: 2 x 18V 1.7Ah POWERSTACK Li-ion Batteries, 1 x Charger and 1 x TSTAK Kitbox. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all of the 18V XR tools you already have. Specifications: Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,800/0-2,800/0-3,800/min. Impact Rate: 0-4,400/bpm. Max. Torque: 282Nm. Weight: 1.09kg (without battery). * Regarding 50% more power: vs DCB183 battery, not in application. ** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery.
The DEWALT DCE6820 XR Water Tank provides water based dust suppression when cutting concrete or masonry with cutting or drilling equipment. For use with cutoff saws as well as core drills with water delivery systems. It also functions as a portable water source, suitable for a variety of applications. The easy to use control panel allows you to turn on the water supply with the flip of a switch. No manual pumping. Fitted with a durable, ink-resistant, braided hose and adjustable nozzle. This spray nozzle and quick connect adaptor provides cleaning capabilities and quick connection to core drills, cut off saws and other tools. A translucent tank allows you to easily view liquid level and avoid over-filling. Easy to fill and clean thanks to its wide mouth opening. The large cap helps prevent spills and tether keeps cap attached to the tank. The water tank has two handles so users can comfortably move the water tank around the jobsite manually. It can also be stacked onto a TSTAK case for easier transportation. Compatible with the Wireless Tool Control system.This allows for automatic water delivery as soon as you start drilling or cutting. Shortly after you stop, the water delivery also stops automatically. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Tank Capacity: 15 litres. Hose Length: 3m.
This DEWALT DCD805P2T XR BL G3 Combi is supplied with: 1 x Magnetic Bit Holder. 1 x Belt Hook. 2 x 18V 5.0Ah Li-ion Batteries 1 x Multi-Volt Charger. 1 x TSTAK Carry Case. The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improves the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. Specifications: Chuck: 13mm. No Load Speed: 0-650/2,000/min. Impact Rate: 34,000/bpm. Max. Torque: 90Nm. Capacity: Steel 13mm, Masonry 13mm, Wood 55mm. 2 x 18V 5.0Ah Li-ion Batteries
The DEWALT DCD1007 Hammer Drill has a brushless motor which delivers enhanced efficiency as well as durability. Delivers precise control via a variable speed trigger. The 3-speed transmission and electronic torque control lets you customise the performance, so you always get the right setting for drilling and screwdriving. Its compact design incorporates a comfortable and ergonomic grip design. The Perform and Protect E-Clutch system which will shut down the tool if it detects any kind of bind up situation. This protects the tool from overloading. There is also a handy LED work light, enabling work in any lighting condition. Supplied with: 1 x Side Handle. 2 x 18V 5.0Ah POWERSTACK™ Li-ion Batteries. 1 x DCB1104 Battery Charger. 1 x TSTAK Case. Specifications: Chuck: 13mm.No Load Speed: 0-450/0-1200/0-2000/min. Impact Rate: 0-8,500/0-2,210/0-38,250/bpm.Max. Torque: 169Nm.Capacity: Steel 12.7mm, Masonry 12.7mm, Wood 38mm.Weight: 1.87kg (without battery).
Pack of 1000 DEWALT Drywall Collated Coarse Thread Screws 3.5 x 55mm. The DEWALT Drywall Collated Coarse Thread Screws come with a bugle head which countersinks into plaster sheet without tearing the top layer and will set slightly below the surface for a neat finish. The curved surface under the head gently forms the base material without crushing. A constant and sharp needle point allows for fast and easy installation. Black phosphate finish for better corrosion resistance. The screws are collated into a strip, specifically designed for easy and jam-free installation. Suitable for DeWALT , Powers, HILTI, Makita, Senco and most other competitor screwdrivers. 3.5 x 55mm (Pack 1000)f
Pack of 1000 DEWALT Drywall Collated Coarse Thread Screws 3.5 x 45mm. The DEWALT Drywall Collated Coarse Thread Screws come with a bugle head which countersinks into plaster sheet without tearing the top layer and will set slightly below the surface for a neat finish. The curved surface under the head gently forms the base material without crushing. A constant and sharp needle point allows for fast and easy installation. Black phosphate finish for better corrosion resistance. The screws are collated into a strip, specifically designed for easy and jam-free installation. Suitable for DeWALT , Powers, HILTI, Makita, Senco and most other competitor screwdrivers. 3.5 x 45mm (Pack 1000)
Pack of 1000 DEWALT Drywall Collated Coarse Thread Screws 3.5 x 38mm. The DEWALT Drywall Collated Coarse Thread Screws come with a bugle head which countersinks into plaster sheet without tearing the top layer and will set slightly below the surface for a neat finish. The curved surface under the head gently forms the base material without crushing. A constant and sharp needle point allows for fast and easy installation. Black phosphate finish for better corrosion resistance. The screws are collated into a strip, specifically designed for easy and jam-free installation. Suitable for DeWALT , Powers, HILTI, Makita, Senco and most other competitor screwdrivers. 3.5 x 38mm (Pack 1000)
Pack of 1000 DEWALT Drywall Collated Coarse Thread Screws 3.5 x 35mm. The DEWALT Drywall Collated Coarse Thread Screws come with a bugle head which countersinks into plaster sheet without tearing the top layer and will set slightly below the surface for a neat finish. The curved surface under the head gently forms the base material without crushing. A constant and sharp needle point allows for fast and easy installation. Black phosphate finish for better corrosion resistance. The screws are collated into a strip, specifically designed for easy and jam-free installation. Suitable for DeWALT , Powers, HILTI, Makita, Senco and most other competitor screwdrivers. 3.5 x 35mm (Pack 1000)
The DEWALT Galvanised Metal Connector Twist Nails are made from non-alloy steel in accordance with EN10016, ensuring their strength and durability. They feature a spiral shank which provides a strong hold and reduces the risk of nail pull-out. Ideal for a variety of applications, from construction to woodworking. Compatible with the DEWALT DCN694N XR Brushless Metal Connector Nailer. Specifications: Size: 3.4 x 35mm. Pack Qty.: 1,000.
The DEWALT TOUGHSYSTEM 2.0 DXL Worktop allows you to create a workstation. Add width to your reinforced work surface using integrated screw holes to mount 2 x 4 beams or integrate plywood to create an on-site task worktop. Integrated slots allow you to hang your power tools and accessories from each side. Simply add to any stack ofTOUGHSYSTEM 2.0 DXL Drawers or any TOUGHSYSTEM 2.0 module (sold separately).
The DEWALT TOUGHSYSTEM 2.0 DXL Dolly has been designed to withstand the rigours of on-site use. Its durable structure features an impact-resistant body reinforced with integrated steel bars. Its 4 large caster wheels (150mm Ø) offer 360° movement. This allows you to roll over tough terrain and harsh environments with ease. The 360° movement enables ease of use in tight spaces and near sharp corners. The 2 integrated side handles make it easy to lift if needed Compatiable with all DXL modules as well as any TOUGHSYSTEM modules. Specification: Max. Load 200kg.
The DEWALT TOUGHSYSTEM 2.0 DXL Shallow Drawer Unit has been designed to withstand the rigours of on-site use. Its durable structure features an impact-resistant body reinforced with integrated steel bars. A weather seal, protects the contents against water and dust. Metal ball-bearing slides allow the drawers to open smoothly and an automatic quick-latching mechanism keeps them closed. Protect tools and equipment from theft with the integrated metal bar enabling the drawer to be secured using a padlock (not included). Fitted with side metal racks acting as handles for easy transportation or allowing you to hang power tools or accessories, for quick accessibility on the job. Auto stacking latches allow for easy connection with any DXL modules as well as any TOUGHSYSTEM module, including half width units. Supplied with a number of dividers to organise your tools and accessories with ease. Specifications: Drawer Dimensions: 645 x 470 x 60mm. Volume: 42.8 Litre. Max. Load: 25kg (12.5kg per drawer).
The DEWALT TOUGHSYSTEM 2.0 DXL Deep Drawer Unit has been designed to withstand the rigours of on-site use. Its durable structure features an impact-resistant body reinforced with integrated steel bars. A weather seal protects the contents against water and dust. Metal ball-bearing slides allow the drawer to open smoothly and an automatic quick-latching mechanism keeps them closed. Protect tools and equipment from theft with the integrated metal bar enabling the drawer to be secured using a padlock (not included). Fitted with side metal racks acting as handles for easy transportation or to allow you to hang power tools or accessories, for quick accessibility on the job. Auto stacking latches allow for easy connection with any DXL modules as well as any TOUGHSYSTEM module, including half width units. Supplied with a number of dividers to organise your tools and accessories with ease. Specifications: Drawer Dimensions: 645 x 470 x 145mm. Volume: 47 Litre. Max. Load: 25kg.
The DEWALT TSTAK™ Soft Bag is made from durable 1200 denier polyester fabric with double stitching and steel reinforced rivets for additional strength and durability. An injected plastic base provides protection on wet floors. Other features include ergonomic carry handles, padded shoulder strap and a zip compartment for securely storing valuables.TSTAK™ System Compatible, can be connected to other TSTAK™ storage modules. Specifications: Dimensions: 30 x 45 x 25cm. Max. Load: 30kg.
The DEWALT DW055PL Pocket Laser Distance Measure has a compact design which easily fits into a pocket, so its always easy to reach. One button design allows for simple operation. The black screen with white digits/letters provides better visibility in brighter conditions. It calculates distance in Metric and Imperial. Powered by a 3.7V lithium-ion battery providing up to 1000 measurements per charge. Easy recharging via USB port, it takes 2.5 hours to fully charge from empty. Specifications: Accuracy: 6 plusmn;mm/m @ 10m.Operating Range: 16m.
DEWALT SDS Plus XLR Full Head Carbide Drill Bits have a solid carbide tip which offers users the highest performance in the toughest applications. The 4-cutter geometry provides clean holes, high drilling speed and reduces the chance of jamming of the drill in reinforced concrete. Made from a superior hard metal alloy with an increased drill core structure for greater resistance to fracture. Optimised flute design allows for efficient debris removal. This DEWALT XSDS Plus XLR Full Head Carbide Drill Bit has the following dimensions: Diameter: 6.0mm.Working Length: 100mm.Overall Length: 160mm.Pack Quantity: 1.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 13.0mm Black Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 12.0mm Black Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 11.0mm Black And Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 10.0mm Black Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 9.5Mm Black And Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 9.0mm Black And Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. 1 x DEWALT 8.5mm Black And Gold Hex Drill Bit HSS.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 8.0mm.Length: 117mm.Working Length: 79mm.Pack Qty.: 1.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 7.5mm.Length: 114mm.Working Length: 76mm.Pack Qty.: 1.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 7mm.Length: 111mm.Working Length: 73mm.Pack Qty.: 1.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 6.5mm.Length: 105mm.Working Length: 67mm.Pack Qty.: 1.
