The DEWALT DT9398 SDS Plus Drill Bit Set contains a selection of the most popular sizes. Made from superior carbide grade for long life and greater durability. The optimised flute design allows for efficient debris removal. Suitable for drilling in masonry and brick. Supplied in a plastic case with the following sizes: 3 x 5.5mm and 2 x 7mm.
The DEWALT DT70761 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 21 x HSS-G Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: T15, T20(x22), T25(x4), T30, T40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: T20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
The DEWALT DT70758 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Brad Point Bits: 3, 4, 5, 6, 8, 10, 12mm 6 x Extreme Flat Bits: 12, 14, 16, 20, 22, 25mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: TX15, TX20(x22), TX25(x4), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
The DEWALT DT70757 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x HSS-G Extreme Drill Bits: 3, 4, 5, 6, 8, 10, 12mm 2 x Flat Bits: 14, 20mm 4 x 25mm Phillips Bits: PH1(x2), PH2(x2)27 x 25mm Pozidriv Bits: PZ2(x25), PZ3(x2) 10 x 25mm TORX Bits: TX10(x3), TX20(x3), TX25(x2), TX30(x2)2 x 25mm Slotted Bits: 6, 8mm 1 x Nut Driver: 8mm 2 x Adaptors: 1/4in Hex to 1/4in Square, 1/4in to 3/8in
DEWALT Extreme Tri-Flute Spade Bits with 3 cutting edges for up to 6x faster cutting, combined with a tri-flute for optimum chip removal and less binding. There are 3 cutting spurs for cleaner and faster holes, the spurs also extend drilling life. Its full screw tip allows the bit to self-feed, for ease of use and pull through. Fitted with a quick-change shank, fits standard quick-change extensions and 1/4in hex bit adaptors. For use with corded and cordless drills. Suitable for drilling holes in wood up to 100mm deep. This 6 Piece Set contains the following sizes: 13, 16, 20, 22, 25 and 32mm.
The DEWALT DT70759 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Masonry Drill Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 12 x Extreme 2® HSS-G Drill Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH325 x 25mm Pozidriv Bits: PZ1, PZ2(x23), PZ39 x 25mm TORX Bits: TX15, TX20(x3), TX25(x3), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
The DEWALT DT70760 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Masonry Drill Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 12 x Extreme 2® HSS-G Drill Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 5 x SDS Plus Extreme 2® Masonry Drill Bits: 6 x 110, 6 x 160(x2), 8 x 160, 10 x 160mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: TX15, TX20(x22), TX25(x4), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
DEWALT Black & Gold HSS Drill Bits have a speed tip and a tough core for increased durability. The bits also incorporate a no-spin shank that eliminates the frustration of the bit spinning in the chuck. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 21 Piece Set contains the following sizes: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10 and 12mm.
DEWALT SDS Plus Extreme 2®Drill Bits are made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 10 Piece set contains the following sizes: 5 x 110mm, 6 x 110mm(x2), 6 x 160mm(x2), 7 x 160mm, 8 x 160mm, 9 x 160mm, 10 x 160mm and 12 x 160mm.
The DEWALT DT70756 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 21 x Extreme Metal Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 3 x 25mm Phillips Bits: PH1, PH2, PH34 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ32 x 25mm TORX Bits: TX20, TX25 1 x 50mm Pozidriv Bit: PZ2 2 x 89mm TORX Bits: TX20, TX25 1 x Magnetic Screw Guide1 x Magnetic Bit Holder
DEWALT Extreme Flat Wood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hardwood and softwood, chipboard and other man-made materials. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 9 Piece Set contains the following sizes: 12, 14, 16, 18, 20, 22, 25, 28 and 32mm.
The DEWALT DT70754 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 5 x SDS Plus Drill Bits: 5mm, 6mm, 6.5mm, 7mm, 8mm 7 x Masonry Drill Bits: 4mm, 5mm, 6mm(x2), 7mm, 8mm(x2) 3 x 25mm Phillips Bits: PH1, PH2, PH3 4 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ3
DEWALT SDS Plus XLR Full Head Carbide Drill Bits have a solid carbide tip that offers users the highest performance in the toughest applications. The 4-cutter geometry provides clean holes, high drilling speed and reduces the chance of jamming of the drill in reinforced concrete. Made from a superior hard metal alloy with an increased drill core structure for greater resistance to fracture. Optimised flute design allows for efficient debris removal. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 10 piece set contains the following sizes: 5 x 110mm, 6 x 110mm(x2), 6 x 160mm(x2), 6.5 x 160mm, 8 x 160mm(x2), 10 x 160mm and 12 x 160mm.
The DEWALT DCW200 XR Brushless 1/4 Sheet Palm Sander utilises cordless technology for more user freedom. Its brushless motor offers superb run time and durability. A dust-sealed switch and dust-sealed bearings provide prolonged product life. A textured anti-slip top and body grip provide ultimate comfort and control during use. Fitted with a hook & loop platen that provides faster paper changes, better dust extraction and increase sanding efficiency. Paper clamps are also provided for conventional abrasives. The Airlock dust port allows for a secure connection between the tool and dust extractor, keeping the working area clean and free from debris. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Bare Unit - No Battery or Charger supplied. Specification: Oscillating Speed: 8,000-13,500/min.Paper Size: 140 x 115mm.Pad Size: 108 x 115mm.
DEWALT Flat Drill Bits are made from high-quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hardwood and softwood, chipboard and other man-made materials. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 8 Piece Set contains the following sizes: 12, 16, 18, 20, 22, 25, 28 and 32mm.
DEWALT Black & Gold HSS Drill Bits have a speed tip and a tough core for increased durability. The bits also incorporate a no-spin shank that eliminates the frustration of the bit spinning in the chuck. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 14 Piece Set contains the following sizes: 1, 1.5(x2), 2(x2), 2.5, 3(x2), 3.5, 4(x2), 5, 6 and 8mm.
The DEWALT DT20421 PCD Circular Saw Blade has been designed for use with the DEWALT DCS571 Compact Circular Saw. With 4 PCD (Polycrystalline Diamond) teeth, longer-lasting than TCT teeth, and creates less dust than other blades. Suitable for cutting: fibre cement, Marley Eternit, HardieBacker®, Trespa®, laminated flooring, melamine, soft and hardwoods, MDF, plywood and chipboard. Specification: Diameter x Bore: 115 x 9.5mm.Teeth: 4.
The DEWALT DCS579NT XR FlexVolt Circular Saw is supplied with the following: 1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x TSTAK™ VI Case Bare Unit - No Battery or Charger supplied.
The DEWALT DT20420 TCT Construction Circular Saw Blade has been designed for use with the DEWALT DCS571 Compact Circular Saw. Made from construction grade carbide with ultra-sharp, impact-resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. An anti-kickback shoulder provides additional safety. Specification: Diameter x Bore: 115 x 9.5mm.Teeth: 24.
The DEWALT DCS727T2 XR FlexVolt Cordless Mitre Saw is supplied with: 2 x 54V 2.0Ah XR Li-ion Batteries1 x Saw Blade 250 x 30mm Bore1 x Charger DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54V batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18V products and offering increased run time.
The DEWALT DCS571 XR Brushless Compact Circular Saw delivers extended run time, reliability and durability. It features a cast gearbox for repetitive, accurate cuts and an intelligent trigger for total control over all applications. Keyless bevel angle and depth of cut adjustment with an easy to read scale allow for maximum cordless versatility. The lock off switch and electronic motor brake provide additional control and work safety. Fitted with an ergonomic handle set with rubber overmould for optimal user comfort. There is also a spindle lock for quick and easy blade change. Supplied with a thin kerf 115mm, 24 tooth carbide tipped blade that allows for efficient run time and a fast, smooth cut finish. Bare Unit, No Battery or Charger supplied. Specification: No Load Speed: 4,500/min.Blade (Ø x Bore): 115 x 9.5mmBevel Capacity: 0-45°Max. Depth of Cut at 90°: 38mmWeight: 2.5kg
The DEWALT DCS572 XR Circular Saw has a powerful brushless motor for extended run time and service life. With a tool-free, variable adjustment bevel angle from 0° to 57° and a depth level scale for precise cutting depth setting. The additional handle and an electronic brake provide safe 2-handed work. Its stable block construction provides low vibration running and increased service life. A spindle lock allows for quick, easy blade change. Ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. Bare Unit, No Battery or Charger. Specification: No Load Speed: 5,500/minMax. Cutting Depth: @90º 58mm, @45° 44mmBlade: 184mm, 16mm BoreBevel Capacity: 57°Weight: 3.6kg
The DEWALT DCS579T2 XR FlexVolt Circular Saw comes with the following: 2 x 54V 6.0Ah Li-ion Batteries1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x 18-54V DCB118 XR FlexVolt Multi-Voltage Fast Charger1 x TSTAK™ VI Case
The DEWALT DCS578X2 XR FlexVolt Circular Saw is supplied with the following: 2 x 54V 9.0Ah Li-ion Batteries1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x 18-54V DCB118 XR FlexVolt Multi-Voltage Fast Charger1 x TSTAK™ VI Case
The DEWALT DCS578T2 XR FlexVolt Circular Saw is supplied with the following: 2 x 54V 6.0Ah Li-ion Batteries1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x 18-54V DCB118 XR FlexVolt Multi-Voltage Fast Charger1 x TSTAK™ VI Case
