The DEWALT DCN45RND2 XR Brushless Roofing Coil Nailer is supplied with: 2 x 18V 2.0Ah Li-ion Batteries*1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger1 x TSTAK™ Kitbox *500 nails per charge
The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).
DEWALT DCL077 Compact Task Light with a 360° handle enabling use in multiple orientations. There is also an integral tripod mount. It has 3 light settings, the most powerful produces 2,000 lumens with a natural daylight hue. Compatible with DEWALT 10.8V, 12V, 18V XR Li-ion batteries. Bare Unit - No Battery or Charger supplied. Specification: Light Output: 500/1,000/2,000 lumens.
The DEWALT DCG418T2 XR FlexVolt Grinder is supplied with: 2 x 54V 6.0Ah Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case
The DEWALT DCG418X2 XR FlexVolt Grinder is supplied with: 2 x 54V 9.0Ah Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case
DEWALT DCG406N XR Brushless Angle Grinder with paddle switch operation. An electronic brake stops the wheel quickly when the trigger is released, whilst an electronic clutch reduces the kickback reaction in the event of a pinch or stall. A mesh cover restricts dust being sucked through the motor, prolonging motor life. The ergonomic design includes a rubber overmould for increased grip and comfort. Its two-position side handle allows for greater comfort and control. Bare Unit - No Battery or Charger supplied. Specification: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.75kg.
The DEWALT TSTAK™ 2.0 Tower has been designed for convenient and easy access to tools. Made up of the following cases: 1 x TSTAK™ 2.0 Deep Toolbox has a removable, half-size, internal tote tray for easy access to key hand tools, fixings and power tool accessories. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK™ 2.0 Shallow Toolbox with front and top carry handles that allow the box to be carried in both orientations. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include a customisable foam insert that keeps power tools safe during transportation, heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK™ Toolbox III (Deep Drawer) made from 3mm polypropylene plastic. It has a heavy-duty ball bearing sliding drawer and is supplied with 8 removable storage cups with lids for excellent organisation. Its bi-material handle ensures user comfort. 1 x TSTAK™ V Clear Lid Organiser with 2 large and 5 small removable storage cups. Ideal for storing small parts and accessories. Its unique heavy-duty lid design locks all compartments in place for secure storage. 1 x TSTAK™ Carrier Base. It can be fitted quickly and easily onto the base of any TSTAK™ unit to allow easier transportation of tools and accessories. With 360° swivel wheels and a locking brake for maximum manoeuvrability. Compact and lightweight design for easy storage when not in use. All can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the boxes tracked via the DEWALT Tool Connect App. Total Load Capacity: 100kg
The DEWALT TSTAK™ 2.0 Combo Kit includes the TSTAK™ 2.0 Shallow Toolbox and TSTAK™ IV Shallow Drawer Unit. The shallow toolbox is ideal for storing cordless/corded power tools whilst the double shallow drawers provide organisation of small parts and accessories. The TSTAK™ 2.0 Shallow Toolbox has front and top carry handles that allow the box to be carried in both orientations. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. There is also a handy organiser compartment in the lid (not IP rated) providing easy access to fixings and small tools. Other features include a customisable foam insert that keeps power tools safe during transportation, heavy-duty metal front latches and a padlock eye for increased security. The TSTAK™ IV Shallow Drawer Toolbox has 2 heavy-duty ball bearing sliding drawers with adjustable dividers for excellent organisation. Both can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Dimensions (DxWxH): 320 x 440 x 340mmMax. Load: 30kg
The DEWALT TSTAK™ 2.0 Mobile Storage Box has an ergonomic, telescopic handle and durable 177mm (7in) wheels for easy transportation of heavy tools. Designed to carry and transport T-STAK® modules, giving the option of connecting and customising multiple units depending on what is required for a jobsite. The toolbox has a removable, half-size, internal tote tray for easy access to key hand tools, fixings and power tool accessories. A high-performance seal in the lid provides water and dust protection (IP54) to power and hand tools in the box. Other features include heavy-duty metal front latches and a padlock eye for increased security. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. Specification: Dimensions (DxWxH): 435 x 515 x 635mmMax. Load: 50kg
The DEWALT TSTAK™ 2.0 Deep Toolbox has a long, aluminium, top carry handle for easy and comfortable transportation. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. There is also a handy organiser compartment in the lid (not IP rated) providing easy access to fixings and small tools. Other features include a customisable foam insert that keeps power tools safe during transportation, heavy-duty metal front latches and a padlock eye for increased security. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. Specification: Dimensions (DxWxH): 330 x 440 x 325mmMax. Load: 30kg
DEWALT DS450 TOUGHSYSTEM™ 2.0 Mobile Storage with a detachable telescopic handle for easier storage and transportation. It also features durable 200mm (8in) PU wheels, ideal for use on difficult sites. The box lid has a high-performance seal, making it dust-tight and waterjet resistant (IP65) to withstand the most severe weather. With easy close, metal wire front latches for easy one-handed operation. A metal-reinforced padlock eye provides increased security. Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM™ modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM™ modules. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Specification: Depth: 685mm.Width: 554mm.
The DEWALT Typhoon T Shirt has a ribbed crew neck and set in sleeve to ensure maximum comfort, whilst a twin needled hem and cuff ensure durability. The DEWALT brand is displayed discreetly across the chest, with an integrated back neck hanger loop for convenient storage. Material Composition: 65% Polyester, 35% Cotton.1 x DEWALT Typhoon Charcoal Grey T Shirt XX Large (52in Chest)
The DEWALT Typhoon T Shirt has a ribbed crew neck and set in sleeve to ensure maximum comfort, whilst a twin needled hem and cuff ensure durability. The DEWALT brand is displayed discreetly across the chest, with an integrated back neck hanger loop for convenient storage. Material Composition: 65% Polyester, 35% Cotton.1 x DEWALT Typhoon Charcoal Grey T Shirt X Large (48in Chest)
The DEWALT Typhoon T Shirt has a ribbed crew neck and set in sleeve to ensure maximum comfort, whilst a twin needled hem and cuff ensure durability. The DEWALT brand is displayed discreetly across the chest, with an integrated back neck hanger loop for convenient storage. Material Composition: 65% Polyester, 35% Cotton.1 x DEWALT Typhoon Charcoal Grey T Shirt Medium (42in Chest)
The DEWALT Typhoon T Shirt has a ribbed crew neck and set in sleeve to ensure maximum comfort, whilst a twin needled hem and cuff ensure durability. The DEWALT brand is displayed discreetly across the chest, with an integrated back neck hanger loop for convenient storage. Material Composition: 65% Polyester, 35% Cotton.1 x DEWALT Typhoon Charcoal Grey T Shirt Large (46in Chest)
The DEWALT TSTAK™ Caddy has a tough, durable design made from 3mm polypropylene plastic. Stores up to 5 TOUGH CASE+ accessory cases and 4 small bulk storage cases (Tic Tac). The TSTAK™ interlocking storage system allows toolboxes to be interconnected and configured to meet the user's needs. Engineered plastic side clips to enable numerous boxes to be stacked and held securely together for transport.
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 32mmWorking Length: 280mmOverall Length: 380mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 32mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 26mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 24mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 22mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 20mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 16mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 14mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 12mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 10mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 8mmWorking Length: 100mmOverall Length: 200mm
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 6mmWorking Length: 100mmOverall Length: 200mm
