A Faithfull small pocket sized damp and moisture meter that can be used to measure the moisture content in timber, paper, cardboard and hard materials such as mortar, concrete and plaster. The moisture content is displayed as a percentage reading on the LCD digital display that is equipped with a backlit function for use in dark environments. The meter can also be used to measure the ambient temperature and is compact, portable and easy to use. The meter is supplied in with a probe cover for safe storage when not in use. Features:Clear easy to read LCD display.Accurate moisture measurement.Works on hard and soft materials.Auto power-off.Low battery indication.4 x LR44 Batteries included. Probe cover for safe storage. SPECIFICATION: Measurement Range:Wood: 6-42%, Material: 0.2-2.0%, Temperature: 0-40°C.Resolution:Wood: 1%, Material: 0.1%, Temperature: 1°C/2°F.
This Faithfull versatile advanced electronic detector helps avoid costly mistakes caused by drilling into concealed power cables, gas or water pipes and removes any guesswork when securing fixtures, hanging pictures or fitting shelving by pinpointing a solid base for fixing. The detector can be used to detect and locate wooded studwork, metal and AC voltage, providing a clear indication of concealed objects using the LED and buzzer indicator system. A marking groove is also provided at the top of the detector so that the surface can be marked prior to any drilling, nailing or screwdriving. Features: Finds wood and metal studs.Finds and identifies a stud centre.Finds AC voltage and scans to trace live cables.Metal scanning to find nails, pipes, rebar and other hidden metal objects.LED and buzzer Indicators.9V 6F22 Alkaline battery included. Applications: This detector may be used to carry out the following operations:Detect metal pipes in concrete, behind ceilings, floors and walls.Detect wooden studwork behind ceilings and walls.Detect electrical box, exhaust vent, conduit, rebar, and ducting.Detect and trace live cable behind ceilings, floors and walls. Approximate detection depths: Stud mode: Wood stud of 30x30mm: ≤14mm.Metal mode: Iron pipe of dia. 25mm: ≤25mm.AC mode: Typical depth of 50mm for 90-250V at 50-60Hz.
The Faithfull Sound Level Meter is a compact digital tool for recording noise levels. It can be used to measure the sound level in all kinds of environments, such as factories, schools, offices, traffic, roads etc.Features include over-range indication, Max./Min. measurement mode, data hold, low battery indication, auto power-off and more. Sound level meters are instruments designed to react to the noise much like the human ear. The measurements taken by sound level meters are compared to known standards to identify whether the noise level could have a detrimental effect on humans located near the noise source.It is supplied with a removable wind noise reducing cap, batteries and user manual.Display: 4 digits LCD with backlightFrequency Weighting: AMeasuring Range: 30 dB - 130 dBFrequency Range: 30Hz~8kHzResolution: 0.1 dBAccuracy: ±1.5 dBOver-range Indicator: "OL" appears when the measured value is higher than the upper limit of the measuring range. "LO" appears when the measured value is lower than the lower limit of the measuring range.MAX./MIN. Measurement ModeTime Weighting: FAST mode and SLOW mode Microphone: Omni-directional Condenser MicrophoneOperating Altitude: <2000m above sea levelOperating Environment: 0-40°C, 20%-30%RHStorage Environment: -10°C to 50°C, <90%RHPower: 3 x 1.5V AAA batteries (supplied)Size: 160 x 54 x 32mmWeight: approx. 110g (including battery)
The Ridgid Micro CD-100 Combustible Gas Detector provides simple and quick readings to identify the presence of combustible gases. Detects Methane, Propane, Butane, Ethanol, Ammonia, Hydrogen and many other combustible gases. With adjustable sensitivity, even low-levels of gases can be detected. Ideal for ensuring proper gas line installations, checking for maintenance and repair needs or quickly pinpointing combustible gas leaks. The rugged ergonomic design makes it capable of withstanding jobsite rigour. Tri-Mode Detection™ provides visual, audible or vibration alert which can be adjusted for different environments. A 16 inch flexible probe allows location and detection of leak in hard-to-reach and confined spaces. Specifications: Detection range: 0- 6,400ppm (Methane).Alarm sensitivity: 40ppm (Methane).Calibration: Automatic.Power Source: 4 x AA batteries (included).Classifications: Class B, Division 1.
The Ridgid DM-100 Micro Digital Multimeter is a True RMS and AutoRanging unit, which provides accurate and fast measurements in all applications. It features 11 different electrical functions ranging from AC/DC Voltage and Current (1,000 volt) to temperature measurements. The multimeter has a double moulded water-resistant (1m) IP67 housing. It is also drop-proof and perfectly suitable for use in the harshest job site conditions. An extra large backlit LCD display provides easy and clear readings. The DM-100 is rated for industrial use (CAT III-1000V and IV-600V). Supplied in a soft carrying case with double-moulded test leads, Type K temperature probe and a 9V battery. Functions and Range: Voltage AC/DC: 400.0mV - 1,000V.Current AC/DC: 400.0µA - 10A.Resistance: 400.0 - 40.00M.Capacitance: 4.000nF - 200.0µF.Frequency: 9.999Hz - 9.999MHz.Duty Cycle: 0.1% - 99.9%.Diode Check: 1.5V.Continuity Test: 150.Temperature: -20°C - 760°C. Specifications: Power Source: 9V battery (included).Display: 4000 Count Backlit LCD.Overload Protection: CAT III and IV1,000V/600V.Fuses: 0.5A and 10A - 1,000V.Insulation: Class II, double moulded.IP Rating: IP-67 water-resistant (1m).Polarity Indication: Yes, automatic.Auto Power-Off: Yes, after 15 minutes.AutoRanging: Yes.Manual Ranging: Yes.True RMS: Yes.
The RIDGID® Micro IR-200 Non-Contact Infrared Thermometer provides simple, quick and accurate surface temperature readings at the push of a button. Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Ultra-Sharp Dual Class II Lasers easily identify the surface area being measured. Has a 30 to 1 Distance To Spot Ratio, this allows you to take more accurate measurements from a farther distance. With adjustable emissivity to accurately measure the temperature of virtually any surface. Uses audible and visual, high and low alarms to quickly alert user to temperatures outside of the ranges that are set. It has a bright backlit display which can be toggled on in poorly lit areas and can be mounted on a tripod for repeatable, precise temperature measurements. Specification Temperature Range: -50 to 1200°C (-58 to 2192°F),Distance To Spot Ratio: 30 to 1.Response Time: <150ms.Temperature Display: Current Temperature & MAX Temperature.Measurement Units: Fahrenheit & Celsius.Power Source: 1 x 9 Volt Battery (Included).Weight: 0.20kg.
The Stanley S160 Stud Sensor detects wood studs up to 25mm in depth and metal studs up to 38mm in depth. It also detects the presence of AC live wire within a 15-45cm radius and up to 50mm depth. Single button for simple operation. An audible alert provides clear notification of stud detection whilst directional LED lights provide visual guidance to stud location. Auto-calibration helps to avoid missed studs due to incorrect initial calibration. With a slim profile design for easy storage and portability. A centre marking channel allows for accurate stud markings. Ideal for locating studs to enable tasks such as TV mounting, hanging pictures and shelves. Specification: Max. Detection Depth: Wood Stud 25mm, Metal Stud 38mmInput Power: 2 x AAA batteries (supplied)
The Stanley Intelli Tools FatMax® Basic Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. A manual function and range switch allows you to select different functions/ranges. A 'Hold' button allows you to hold the last measured reading. It has a 3.5in LCD display and is encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 2M ohmContinuity: <30 ohm
The Stanley Intelli Tools FatMax® LED Voltage Tester uses an LED display to show the measured value immediately, polarity is also indicated. The durable body is IP54 rated, meaning it is resistant to debris/water. Specification: Voltage: AC/DC 400V
The Stanley Intelli Tools Digital Infrared Thermometer is accurate to within 3° with a wavelength between 630-660nm and a temperature range of -38°C to +520°C. This large range allows users to effectively complete their desired tasks. With a high contrast, back lit display for visibility in all light conditions and an IP20 casing that provides protection against dust, increasing its working life. Features thermal leak detection, from a reference temperature (green screen). Scanning an area will show a red screen for high temperature and blue screen for low temperature. Its 8:1 spot ratio allows for users to measure a 32cm circle from 2.5m distance. Emissivity 0,95, covers all thermal radiation emission of most materials. Powered by 2 x AA batteries which are supplied.
The Stanley S110 Stud Sensor detects wood and metal studs up to 19mm in depth. It also detects the presence of AC live wire within a 15-45cm radius and up to 50mm depth. Single button for simple operation. An audible alert provides clear notification of stud detection whilst directional LED lights provide visual guidance to stud location. Auto-calibration helps to avoid missed studs due to incorrect initial calibration. With a slim profile design for easy storage and portability. A centre marking channel allows for accurate stud markings. Ideal for locating studs to enable tasks such as TV mounting, hanging pictures and shelves. Specification: Max. Detection Depth: Wood / Metal Stud 19mmInput Power: 2 x AAA batteries (supplied)
The Stanley Intelli Level Moisture Meter gives a % moisture reading based on electrical resistance across two pins. LCD screen with dual measurement bar graph. Measures moisture in wood: 6-44%, and other building materials: 0.2-2%. Powered by 3 x Cell Batteries (supplied).
The Faithfull Voltage Detector Stick is a non-contact AC voltage detector for detecting 5-1000V AC voltage. It is ideal for testing sockets and wires, and for detecting break points in a live wire.When AC voltage is detected, the indicator LED will flash red and the built-in buzzer will sound short beeps. The rotary power switch can be used to adjust the unit's detection sensitivity and an illumination function is provided for use in dark places. The detector's LED will flash red periodically to indicate there is sufficient battery power left. The casing features a pocket clip to help keep the unit close to hand.Supplied with batteries and user manual. Specification: Voltage Detecting Range: 5-1000V ACFrequency Range: 50~400HzSafety Category: CAT IV 1000VPower: 2 x 1.5V AAA batteries (supplied)Size: 154 x 32 x 28mmWeight: approx. 50g (including batteries)
The Stanley Intelli Tools FatMax® Wall Plug Tester quickly checks the status of UK wall plugs. The LED lights clearly indicate a range of wiring conditions such as correct, missing earth and live earth reverse etc. This unit will not detect earth neutral reverse. Designed to Safety Standard EN 61010.
The Black & Decker TLD100 Thermal Leak Detector will help to identify both hot and cold draughts around your home. It has a large LED display thats show the temperature in either Fahrenheit or Celsius. The detector automatically switches between shining a blue light for cooler leaks, or a red one for hotter targets. Powered by a single 9V alkaline battery that sits neatly into the handle where the switch is located. Allows you to make your home more comfortable and energy efficient. Ideal for those concerned about the effects of global warming.
The Stanley Intelli Tools FatMax® Non-Contact Voltage Detector can be used to detect voltage or non-contact metals up to 20mm. Allows you to check voltage in a circuit without contact. The integrated sensitivity adjustment allows you to narrow down the search area of live voltage. Specification: AC Voltage Range: 20-1000VMetal Detecting Distance: <20mmSafety Rating: CAT III 600V & CAT II 1000V
The Arctic Hayes 3 In 1 Thermometer is a pipe, infrared and stem thermometer, all in 1 instrument. Select measurement in °C or °F with a response time less than 1 second. The clamp opens to a max of 1in (25mm) approx. Other features include: max/min record, data hold & automatic power off function. Specification IR Temp. Range Temperature Range: -35°C to +260°C/-31°F to 500°F.IR Temperature Resolution: 0.1°C/°F.Optical Resolution 1:1 Distance to Spot Size.Thermistor Temperature Range: -40°C to +260°C/-40°F to 500°F.Resolution: 0.1°C/°FBasic Accuracy: 2% of Readings.
The Stanley Intelli Tools FatMax® Smart Clamp Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. AC current is measured through the clamp, any other measurements are done through cables like a normal digital multimeter. The Smart Function automatically detects the correct measurement. A 'Hold' function allows you to hold a value for a few seconds. It has a 3.5in LCD display with a dual display option, allowing you to keep 2 values on the screen at the same time. Encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 10M ohmFrequency: 3 kHzContinuity: <40 ohm
This Faithfull Battery Tester is simple and easy to use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 batteries and 1.5V button cells and folds down for easy storage. Features: Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE:The tester is activated by the battery being checked. Keep test time as short as possible to avoid unneccessary battery drain.
The Stanley Intelli Tools FatMax® Smart Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. The Smart Function automatically detects the correct measurement. A 'Hold' function allows you to hold a value for a few seconds. It has a 3.5in LCD display with a dual display option, allowing you to keep 2 values on the screen at the same time. Encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 10M ohmFrequency: 3 kHzContinuity: <40 ohm
A Faithfull high-precision digital electronic thermometer, for use in both industrial and domestic applications where accurate temperature readings are required. Ideal for use in laboratories for temperature testing and monitoring and essential for use when preparing cooked foods such as meat, poultry, infant milk and many other foods when accurate temperature readings are necessary. This thermometer can be set for either Celsius or Fahrenheit measurement, maximum or minimum readings and has a useful data hold facility. The easy-clean stainless steel probe features a sharp point with a Slimline design allowing effortless penetration of meats and provides a fast response time when taking readings. The large LCD digital display is easy to read and has an automatic power off function when not in use. The thermometer is supplied in with a probe cover for safe storage when not in use. Features:Clear easy-to-read LCD display.Celsius or Fahrenheit readout.Data hold facility.Stainless Steel slimline easy clean probe.1.5V LR44 battery included.Pocket size.Automatic power off function.Probe cover for safe storage. SPECIFICATION:Measuring Range (Probe): Celsius Temperature: -40°C to 250°C.Fahrenheit Temperature: -40°F to 482°F.Operating Temperature: 0°C (32°F) to 50°C (122°F).
This Faithfull pH Meter is easy-to-use and an essential instrument for both the professional and keen gardening enthusiast, providing a quick no fuss method of measuring the pH (acidity and alkalinity) value of soil. Knowing the pH value is very important and directly influences the health of plants. Using this meter to provide an accurate reading will allow the pH level to be adjusted accordingly to best suit the plants being grown prior to planting. The meter can also be used to help identify the best growing environment and area for growing outdoor plants, shrubs, vegetables and trees and for improving and modifying soil in gardens. Features:Analogue needle Acid-Alkaline indicator.Accurate pH soil reading in 60 seconds.Ideal for fruit and vegetables.No batteries required. To change soil pH:A .To increase the pH value, lime should be added. Lime is a compound of calcium or calcium and magnesium. Applied in the form of ground agricultural limestone, burnt lime or hydrated lime for the quickest result.B. To decrease the pH value use either aluminium sulphate or sulphur. Aluminium sulphate is the quickest acting as it will increase the acidity as soon as it dissolves into the soil.Quantities of additives will vary depending on the type of soil. Consult a gardening book or professional gardener if further advice is needed.
It is important to regularly check for possible electromagnetic leaks from Microwave ovens. Excessive leakage can be a problem and of particular danger to expectant mothers. This Faithfull detector can be used to verify any leak from Microwave ovens and other sources within a few minutes. The detector's analogue display will clearly show if an electromagnetic field leak is present. The Green sector indicates that the product is safe, the Red sector warns that a leak is present which could be harmful to humans. The detector may also be used to check other items that generate an electromagnetic field such as Mobile Phones and Cameras. Features:Analogue needle indicator.Easy read SAFE and CAUTION warning.Compact and easy-to-use.Frequency range: 3MHz to 3GHz.No battery required.Use on Microwave ovens, Mobile phone and Cameras. Applications:This detector may be used to:Detect leaks from electrical items generating an electromagnetic field when in operation.Frequency range covered by this detector is: 3MHz to 3GHz. Specifications: Frequency range: 3MHz to 3GHz.Working Temperature: 0°C to 40°C.Size: 45 x 100 x 22mm.Weight: Approx. 38g.
The Faithfull Socket Polarity Tester tests sockets quickly and easily. It can be used to determine whether socket wiring is correct or incorrect. Used in conjunction with the coding table provided, the 3 combined lamps indicate the state of the socket's wiring condition. The compact and durable design is easy to operate and read. Just plug into a socket for automatic detection. Specification: Socket Type: UK 240V 3-PinNominal Voltage: 240VFrequency Range: 50~60HzOperating Temperature: 0°C to 40°CDimensions: 71 x 62 x 62mmWeight: approx. 63g
