The Faithfull low tack, adhesive carpet protector film, made of tough polythene and designed to protect carpets without creating a trip hazard. It must be renewed every four weeks (not suitable for thick pile carpets). It provides protection against decorating spills, high foot traffic when moving house and is suitable for stair carpets. Simple and fast installation and removal Size: 600mm x 25m Roll.
This Faithfull dual rail, push-action Tile Cutter has a tungsten carbide cutting wheel, which is ideal for most types of tiles. It will cut tiles up to 300mm square, 210mm diagonal, and up to 10mm thick. This cutter features a solid chromed dual rail with a ball bearing sliding handle for a consistent and smooth cutting action, rubber bump stops, graduated angle guide, and rubber feet that provide a non-slip contact point. Replacement wheel available (FAITLCUT300W). How to use:Position the tile on the cutter, with the line of cut on central ridge.Score once only the whole length of the tile using even pressure pushing forward.To snap the tile, ensure wheel is clear of tile edge and bring handle down firmly. Specification: Tile Capacity: 300mmDiagonal: 210mmThickness: 10mm
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Brass.
Blackfriar Wood Primer provides the perfect foundation to painted surfaces. Its special solvent based formulation makes easy work of new and stripped surfaces, enabling you to overcoat with ease. Perfect for the pre-decoration of soft and hard woods. For interior and exterior use. Application method: brush, roller and spray. Coverage: 14m²/L/CoatTouch Dry: 2-4 hoursHard Dry: 3 daysRecoatable: 16 hoursThe Blackfriar BKFWPW250 Wood Primer comes in the following:Colour: White.Size: 250ml.
Faithfull trade quality woven Microfibre Roller Sleeves offer excellent results when used with emulsions and woodstains. They pick up paint easily and apply an even coat on smooth or semi-smooth surfaces. Suitable for use with a vast range of coverings including thinner paints, woodstains and coatings.1 x Faithfull Microfibre Roller Refill Long Pile 230 x 38mm (9 x 1.1/2in)
Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600° C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required. With no primer required prior to use and its quick drying properties, this paint saves valuable time. Hammerite High Heat Paint is impact resistant, durable and long lasting, making it an excellent choice for painting metal which is subject to high temperatures. Specification Size: 400ml Aerosol.Colour: Black.
PlastiKote Fast Dry Enamel Paint is a superior quality brush-on paint that comes in a handy 59ml bottle and is ideal for small project or craft uses. Fast Dry Enamel is a non-fading, long-lasting paint which is safe to use on children’s toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic, wicker and wood.Colour: Hot Pink.
PlastiKote Fast Dry Enamel Paint is a superior quality brush-on paint that comes in a handy 59ml bottle and is ideal for small project or craft uses. Fast Dry Enamel is a non-fading, long-lasting paint which is safe to use on children’s toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic, wicker and wood.Colour: Harbour Blue.
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Copper.
The Wagner SteamForce Plus Wallpaper Stripper uses the power of steam to easily remove wallpaper without chemical additives. The high working speed is particularly evident when removing stubborn wallpaper. It has a 3.7m long, heat-insulated hose to increase your reach and safety whilst working. Thanks to the cool-touch design and a well-thought-out valve system, you always work on the safe side. Its long steaming time allows large surfaces to be processed without breaks, tireless working is made possible thanks to the light and handy steamer plate. The small steamer plate included makes it easier to work in hard-to-reach places and ensures a professional result. Also included is a scraper which makes removing the wallpaper even easier. Supplied with: 2 x Steaming Plates: 280 x 200mm, 150 x 75mm and 1 x Scraper. Specification: Input Power: 2,000WTank: 4 litreMax. Run Time: 70 min.Hose Length: 3.7m
Professional quality heavy-duty dust sheet for domestic and trade use, made from 100% cotton twill with a polythene backing. Offers double protection, a cotton surface absorbs paint splashes while the poly backing prevents soak through. The Faithfull FAIDSPC128N Sheet Cotton Twill Poly has the following dimensions:Size: 3.6 x 2.8m (12ft x 9ft approx).
These Faithfull Tile Markers are suitable for marking ceramic surfaces prior to cutting and shaping. May also be used on glass, plastic and metal surfaces. The line can be easily rubbed off after use. The markers' easy-peel action means that no sharpening is required. However, these markers can be sharpened with a knife if a fine edge is required. WARNING: Always test the marker first on a spare tile as permanent marking may occur on certain natural or unglazed materials i.e. stone and porcelain. The pack contains one red and one black marker.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Supplied as an aerosol for easy application. Protects for up to 5 years.HMMSFBAERO Direct to Rust Metal Paint has the following specifications:Finish: Smooth.Colour: Blue.Size: 400ml aerosol.
Blackfriar Quick Drying (Duratough) Interior Varnish transforms interior wooden surfaces. Available in a range of natural shades, it provides a hardwearing, quick-drying finish. The varnish is suitable for all woods. It is resistant to heat, knocks and diluted acids. Water-based formulation.Blackfriar Quick Drying Duratough Interior Varnish Clear Matt 250ml
Rustins Quick Dry White Satin Paint is a hard-wearing, water-based paint suitable for interior and exterior use. Use on bare wood, hardboard, MDF, plaster, brickwork and cement. Excellent covering power. Low odour. Brushes can be cleaned with water.Rustins Quick Dry White Satin Paint. Size: 250ml
This Faithfull Roller Sleeve is manufactured in Europe to demanding standards. The woven pile offers the best paint holding properties and reduces any pile shedding to an absolute minimum. Medium pile rollers are for use with emulsion paints on smooth surfaces.The FAIRWMED112 Medium Woven Pile Roller Sleeve has the following specifications: Length: 228mm. Diameter: 38 mm.
The Vitrex 10 2961 Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.
Rustins Quick Dry MDF Sealer is a quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry MDF Sealer Clear. Size: 500 ml.
Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades. Available in 9 attractive shades. Application Method; Brush or Cloth. Coverage: 30m²/L/Coat.Touch Dry: 1-3 hours.Recoatable: 24 hours.The Blackfriar BKFWDRM250 Wood Dye comes in the following:Size: 250ml.Colour: Redwood Mahogany.
Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, so you can apply a second coat after just 4 hours, enabling you to finish the whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement. Application method: Brush or spray. Coverage: 14m²/L/CoatTouch Dry: 1-2 hoursHard Dry: 3 daysRecoatable: 4 hoursThe Blackfriar BKFWAP250 Quick Drying Acrylic Primer Undercoat comes in the following:Colour: White.Size: 250ml.
Blackfriar Quick Drying (Duratough) Interior Varnish transforms interior wooden surfaces. Available in a range of natural shades, it provides a hardwearing, quick-drying finish. The varnish is suitable for all woods. It is resistant to heat, knocks and diluted acids. Water-based formulation.Blackfriar Quick Drying Duratough Interior Varnish Clear Gloss 500ml
The Evo-Stik Instant Grab Wall Tile Adhesive is for Ceramic Tiles is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds. It has been tested to EN 12004. It is showerproof, the Thin-bed adhesive is Non-slip and suitable for fixing ceramic wall tiles to most types of sound interior surfaces, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles and glazed bricks. The colour off-white/buff and the coverage with a notched trowel is 1.2m² per litre, solid bed 0.3m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. Note that different trowels often apply the adhesive at different rates, usually greater than the above.Evo-Stik Instant Grab Wall Tile Adhesive has the following specification: Size: 10 Litre.
Blackfriar Matt Black Paint is perfect if you need a dead black matt surface. Its non-reflective finish makes it ideal for all interior surfaces such as old beams, panelling, decorative ironwork, stage scenery and darkrooms. It can be used on wood and metal. Application method: brush, roller and spray. Coverage: 14m²/L/CoatHard Dry: 16 hoursRecoatable: 16 hoursBlackfriar Matt Black Paint Size: 500ml
The Faithfull 15 litre plastic paint scuttle that can be used with all types of paint and wallpaper paste. Ribbed side assists in an even apptication on to the roller when used in painting applications. Strong wire handle. Size: 400 x 250mm.Capacity: 15 litres.
Blackfriars Polyurethane Varnish transforms interior woodwork and gives a tough and durable finish. It gives wooden surfaces new life and enhances the natural shades of wooden floors and furniture. Resistant to knocks, heat and diluted acids. Application Method: Brush and Roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.The Blackfriars BKFPCGV250 Polyurethane Varnish P99 comes in the following:Colour: Clear Gloss Size: 250ml
Blackfriars Polyurethane Varnish transforms interior woodwork and gives a tough and durable finish. It gives wooden surfaces new life and enhances the natural shades of wooden floors and furniture. Resistant to knocks, heat and diluted acids. Application Method: Brush and Roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.Blackfriars Polyurethane Varnish P101 Clear Matt 500ml
Rustins Quick Dry Masonry Paint is a high quality, acrylic paint which is suitable for dry exterior masonry surfaces. To apply, use a large brush and apply evenly. The surface area must be clean, dry, free from dust and other contaminants likely to affect adhesion. No primer is required if fresh mortar has been applied to pointing. Do not use on damp surfaces. One coat is usually sufficient. Drying time: approx 30 mins, depending on temperature and humidity.Re-coat: 4 hours.Coverage: 14m² per 1 litre.Colour: Matt White.Size: 500ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN500 is supplied in the following:Container type: Tin.Volume: 500ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN25L is supplied in the following:Container type: Tin.Volume: 2.5 litres.
Zinsser's Cover Stain® is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.On interior surfaces, Cover Stain® dries quickly and has great hiding power, providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.Cover Stain® is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money. On exterior surfaces, Cover Stain® has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood panelling and trim, where few oil-based primers can succeed. It resists cracking and peeling and is compatible with all decorative top coats. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, pad or roller. Application information: Coverage: 9.8m² per Litre. Touch dry: 35 minutes. Hard dry: 4 - 7 days. Recoatable: 2 hours.Zinser CSP25L Cover Stain® is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
Zinsser CoversUp™ Aerosol is a low odour vertical aerosol that is a stain killer and ceiling touch-up paint in one. It seals water damaged ceilings and sprays vertically for ease of use. It’s perfect for touch up when you don’t want to repaint the entire ceiling due to spot damage. Zinsser’s stain blocking primer technology is incorporated into this new generation product that offers a flat white finish that matches most new acoustical ceiling tiles and white ceiling paints. CoversUp™ is an odourless solvent based formula with only a brief odour from propellants that diminishes quickly. Specification Size: 400ml.Colour: White.
Polycell Damp Seal has been specially formulated to seal patches of penetrating damp on interior walls and ceilings in just one coat, preventing them from showing through and spoiling decorations. Damp Seal has a matt white finish that can be over painted or wallpapered if required. - Prevents damp from showing through and spoiling decoration.- Seals patches of penetrating damp on interior walls and ceilings in just one coat.- Touch dry in 4 hours (depending on conditions).- For plaster, cement and stone.- Use indoors.Size: 500ml.
This set comprises 6 round pattern fitch brushes with pure white bristle - useful for re-touching and detail work. The Faithfull FAIPBFITRPK comes in the following sizes: 2, 4, 6, 8, 10 and 12mm.
The Faithfull Heavy-Duty Metal Scraper has a heavy-duty 100mm blade and is ideal for the removal of ceramic tiles. The reversible blade features 2 sharp bevelled edges and is made from fine ground and heat-treated, high-carbon steel.The blade can be mounted with the bevel side facing upwards for use on cement and hard surfaces, or bevel down for use on wood and softer materials. In addition it can be mounted with the blunt side edge facing forwards to knock off adhesive and other surface imperfections.Blade Width: 100mm (4in)Total Length: 530mm (21in)
The Vitrex 10 3402 NDE Torque Master Power Tile Cutter with a diamond cutting blade has a Hi-Torque gear for maximum cutting performance, and a splash guard with a variable height adjustment. Uses a 110 x 22mm diamond blade with continuous rim for extra clean cut, and has a fully adjustable mitre guide with unique ratchet mechanism. Has a double extension built-in for larger tiles, giving the machine greater versatility. The integral measuring guide and quick release rip guide allows for perfect straight cuts. The flip-up table allows for 22.5° and 45° mitres. Has a no mess water re-circulation system that keeps the work area clean and tidy, and the quick release splash guard allows for plunge cuts. Specification Input Power: 450 Watt.No Load Speed: 4,600/min.Blade Size: 110mm.Cutting Depth: @90°: 25mm, @45°: 17mm.Weight: 6kg.
