IRWIN Record 136/5 T-Bar Clamp is a robust clamp for heavy-duty work which offers the facility of permanent fixing to a workbench. T-bar section in cold drawn steel gives extra strength and resistance to bending. Extra long head with machined slides is extremely durable.The IRWIN Record 136/5 T Bar Clamp has the following specifications:Bar Length: 1200mm (48 inch).Capacity: 1050mm (42 inch).
IRWIN Record 136/5 T-Bar Clamp is a robust clamp for heavy-duty work which offers the facility of permanent fixing to a workbench. T-bar section in cold drawn steel gives extra strength and resistance to bending. Extra long head with machined slides is extremely durable.IRWIN Record 136/6 T Bar Clamp 135cm (54 in). Bar Length: 1350mm (54 in).Capacity: 1200mm (48 in).
IRWIN Vise-Grip Locking C Clamps reach into places where ordinary clamps cannot be used. Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.Visegrip Irwin 6SP Locking C Clamp Swivel Pad. Length: 150mm (6in).Throat Diameter: 32mm (1 1/4in).Capacity: 50mm (2in).
The Faithfull Spring Clamp is easy-to-use and cost effective. Made from durable engineering plastic and fitted with a bi-material handle for increased comfort and ease of use. Ideal for general-purpose clamping needs, from holding material whilst fixing, to simple tasks such as securing sheeting or tarpaulins.Pack of 4 Faithfull Spring Clamp 75mm (3in)
The Irwin Record 135 Series Heavy-Duty Sash Clamps have a bar section of 32 x 6mm (1.1/4 x 14in). The slide and head are guaranteed unbreakable and the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar. The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard-wearing rolled thread. Slides and heads are flat bottomed so that the clamp will stand without support.1 x Irwin Record 135/6 Heavy-Duty Sash Clamp - 1200mm (48in) Capacity.
The IRWIN Quick-Grip Hybrid Trigger Clamp combines the benefits of a one-handed bar clamp with the strength of a traditional F-clamp. Its 63.5mm throat depth allows you to clamp in hard to reach difficult areas. Glue resistant pads allow for easy clean up, they also help to prevent marking delicate work surfaces. Fitted with a rubber overmould grip for added comfort and control. Specification: Clamping Force: 136kg.1 x IRWIN Quick-Grip Hybrid Trigger Clamp 450mm.
IRWIN Vise-Grip 18DR locking C clamp has an exceptionally large throat width of 190mm (7.1/2in), which allows objects up to 10in wide to be gripped, depending on the jaw opening. Locking C Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Specification Length: 455mm (18in).Throat Depth: 250mm (10in).Capacity: 190mm (7.1/2in).
IRWIN Record 136/5 T-Bar Clamp is a robust clamp for heavy-duty work which offers the facility of permanent fixing to a workbench. T-bar section in cold drawn steel gives extra strength and resistance to bending. Extra long head with machined slides is extremely durable.IRWIN Record 136/7 T Bar Clamp 150cm (60 in). Bar Length: 1500mm (60 in).Capacity: 1350mm (54 in).
IRWIN Record Medium-Duty Forged G Clamp are a drop forged steel clamp and the slim section permits use in situations where space is limited. Particularly useful for the craftsman with smaller work, the boat builder and the handyman. Have a blue stove enamelled finish. Come in the following sizes: REC1192: 50mm.REC1193: 75mm.REC1194: 100mm.REC1196: 150mm.IRWIN Record Medium-Duty Forged G Clamp Size: 152mm (6 in)
The Stanley Tools FatMax® XL Trigger Clamp has an engineered resin body, that provides minimal distortion and movement, with a die cast ergonomic release trigger, for quick-release and class leading grip. It has a tough, heat treated steel I beam bar that provides long lasting strength and durability. Fitted with removable, soft jaw plates that are grooved for improved grip and a recess for bar and rounded materials. The jaw can be easily reversed, to become a spreader without the need for additional tools. The new FatMax XL Trigger Clamp is 24% stronger than the previous model, and holds a stronger force over a 24 hour period. Clamping Force: 270kg.The Stanley Tools FatMax® XL Trigger Clamp has the following specification: Size: 300mm (12in).Clamping Force: 270kg.
The IRWIN® Quick-Grip® Mini Bar Clamps have a revolutionary design and are fast and easy-to-operate. The high-tech resin body is sturdy and temperature resistant, and the 70kg clamping hold load makes for a perfect lightweight 3rd hand. The clamps have non-marking, stay-on pads that protect the work surface. Ideal for smaller jobs and applications in tight working areas. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.1 x IRWIN® Quick-Grip® Mini Bar Clamp 300mm (12in)
IRWIN Record Heavy-Duty 120 Series G Clamps are the strongest Record clamps, recommended particularly for metal working and fabrication work where a very high clamping force is demanded. They have a drop-forged steel frame for strength and durability with a swivel shoe which helps clamping on uneven surfaces. The twin-start ACME cold rolled thread for faster operation and the fused steel handle will bend before the clamp can be overstressed. A popular general purpose clamp for heavy-duty applications, for use in wood and metal working and other trades . Avalible in the following sizes: REC1203: 75mmREC1204: 100mmREC1206: 150mmREC1208:200mmREC12010: 250mmREC12012: 300mmIRWIN Record Heavy-Duty 120 Series G-Clamp Size: 305mm (12 in). Throat depth: 117mm (4 5/8 in).
The IRWIN® Quick-Grip® Xtreme Pressure Clamps can be operated with a single hand and offer a clamping force of 250kg. A tool-free, Quick-Change™ function allows the jaws to be reversed to perform a spreading action. Features longer length jaws with a unique swivelling action to keep constant pressure on uneven surfaces. They also have a bar rest to allow to be placed larger items, in the clamping jaws hands-free. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.1 x IRWIN® Quick-Grip® Xtreme Pressure Clamp 150mm (6in)
The Faithfull G Clamp is made from malleable SG iron, making it suitable for a wide variety of metalworking and woodworking applications. Accurately machined spindles provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion.1 x Faithfull Medium-Duty G Clamp 50mm (2in)
IRWIN QUICK-GRIP® Quick-Change™ Medium-Duty Bar Clamps can be converted from a clamp to spreader in seconds, with a clamping hold load of 136kg. The lockable swivel jaw enables uneven surfaces to be clamped and it is fitted with square XP-style protective pads to protect the work surface from damage. Enhance your clamps with a wide range of QUICK-GRIP® Clamp Accessories.1 x Irwin Quick-Grip®Quick-Change™ Medium-Duty Bar Clamp 150mm (6in)
The Stanley Tools FatMax® Clutch Lock F Clamps have a cast iron body which gives them strength and durability. Fitted with a stock lock to avoid any unexpected movements. The cold rolled steel reduces any bending or give, whilst the ergonomic handle makes it easy to grip and use. They even have soft soles/grips to avoid any marking or damage on the material/work surface.The Stanley Tools FatMax® Clutch Lock F Clamp has the following specification: Clamp Depth: 80mm.Clamp Capacity: 600mm.Clamping Force: 635kg.
This unique clamp is specially designed for closing gaps between floorboards before securing them in position. Extremely robust and compact, the clamps are standard equipment for professional flooring contractors, and they are designed to provide a long and reliable service life. The smooth operating bevel gears are fully enclosed in a solid grey iron casing for protection against dust and dirt. Features include strong spring loaded malleable iron cams, a high quality steel main screw and drop handle, and easy portability. Used in pairs, these clamps are easy to operate. When they are pushed down onto the joist, the spring loaded cams adjust automatically to create a positive grip on any joist between 38mm and 89mm (11/2 to 31/2) inches wide. The handle is then rotated to wind the shoe out against the floorboard until it is pushed fully home against the adjoining board and nailed before releasing the clamp.
The IRWIN QUICK-GRIP® Clamps have a high-tech resin construction which provides strength and durability. They are ideally suited for crafts which require simple and convenient light clamping.1 x IRWIN QUICK-GRIP® Spring Clamp 50mm (2in)
The Roughneck heavy-duty plastic hand clips have a robust nylon construction.The pivoting soft jaw pads protect workpieces and the hand clips feature a powerful spring mechanism.The Roughneck ROU38331 heavy-duty plastic hand clip has the following dimensions: 25mm (1 inch)
The Stanley Tools Hand Clamps have deep, wide jaws for maximum clamping capacity and versatility. With a large trigger that automatically opens the clamp on release. Swivel shaped jaws keep the material fixed, even awkward shapes. The handles have a soft-grip design that provides increased comfort and reduced fatigue when tightening.The Stanley Tools Hand Clamp has the following specifications: Press Capacity: 50mm.Jaw Depth: 55mm.
The IRWIN® Quick-Grip® Xtreme Pressure Clamps can be operated with a single hand and offer a clamping force of 250kg. A tool-free, Quick-Change™ function allows the jaws to be reversed to perform a spreading action. Features longer length jaws with a unique swivelling action to keep constant pressure on uneven surfaces. They also have a bar rest to allow to be placed larger items, in the clamping jaws hands-free. Enhance your clamps with a wide range of Quick-Grip® Clamp Accessories.1 x IRWIN® Quick-Grip® Xtreme Pressure Clamp 600mm (24in)
The Faithfull Bar Clamp & Spreader is made from heavy-duty ABS plastic with a high-tensile steel bar. Easy-to-use, single handed operation. Cushion gripped jaw pads help to protect the workpiece from damage. Tool-free head release allows the clamp to be quickly turned into a spreader, with a trigger operation to release the force, freeing it for adjustment.This Faithfull Bar Clamp & Spreader has the following specification: Clamp Capacity: 300mm (12in)Spreader Capacity: 480mm (19in)Clamping Force: 70kg
The Faithfull Bar Clamp & Spreader is made from heavy-duty ABS plastic with a high-tensile steel bar. Easy-to-use, single handed operation. Cushion gripped jaw pads help to protect the workpiece from damage. Tool-free head release allows the clamp to be quickly turned into a spreader, with a trigger operation to release the force, freeing it for adjustment.This Faithfull Bar Clamp & Spreader has the following specification: Clamp Capacity: 450mm (18in)Spreader Capacity: 710mm (28in)Clamping Force: 230kg
The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable.The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure.The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications.1 x Faithfull Heavy-Duty G Clamp 300mm (12in)
The Roughneck Spring Clamps have a robust steel construction. The soft jaw pads protect workpieces and the hand clamps feature a powerful spring mechanism.The Roughneck ROU38353 spring clamp has the following dimensions:75mm (3 inch)
The BlueSpot Locking C-Clamp is manufactured from nickel-plated steel for increased durability. With a quick-release function for easy deployment. The jaws have flat faces mounted on a swivel pad for increased precision and stability with uneven workpieces. Specification: Length: 280mm (11in)
The Stanley Metal Spring Clamp has injection moulded jaw pads to prevent marring or damage to the work surface. The stamped metal construction provides strength, whilst the cold-formed spring provides long life. The clamp has ergonomically designed handle pads that fit securely and will not slip.Opening: 25mm (1in).Pack of 1.
The IRWIN QUICK-GRIP® HANDI-CLAMP® features a strong ratcheting mechanism that provides a variable clamping pressure of 20kg (44 lbs). The quick-release trigger allows for fast and easy positioning and release. They are manufactured from a durable glass reinforced material and feature non-marking pads to prevent damage to the workpiece when under compression. The ideal clamp for jobs in the workshop, house and garden. Specially designed jaws hold odd-shaped workpieces.1 x IRWIN QUICK-GRIP® HANDI-CLAMP® 50mm (2in)
Faithfull heavy-duty clamps manufactured from a high quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a Black Oxide coating with powder coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.
The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable.The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure.The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications.1 x Faithfull Heavy-Duty G Clamp 75mm (3in)
The Faithfull Heavy-Duty Lever Clamp with 120kg of gripping force and a heavy-duty ABS plastic and high-tensile steel bar. Tool-free head release allows the clamp to be quickly turned into a spreader, with a lever operation for speed of clamping or spreading. Dual handed fast operation.This Faithfull Heavy-Duty Lever Clamp has the following specification: Capacity: 250mmThroat Depth: 80mmClamping Force: 120kg
The Faithfull Upright Clamp is designed to be the helping hand when working alone. It will securely hold doors, sheet materials, studs for interior wood framing, and many other applications where the material requires support. The clamp gives the user the ability to easily mark-out, route-out, plane, and drill without the difficult job of keeping the material in place with a single hand. Its strong grip will hold materials up to a width of 55mm (2 ¼in) making it ideal for working on FD30 and FD60 fire doors. Simply push the grip out of its holder, and securely lock onto the side of the object. This can be done with a hand, or foot, depending on the application it is used for. The sturdy base can be used on table-tops and floors, with the added benefit of support screw holes that can secure the base in place when used with heavy objects. It can also be secured to an additional base (NOT supplied) for extra stability. Specification: Capacity: 15 – 55mm.
The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable.The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure.The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications.1 x Faithfull Heavy-Duty G Clamp 250mm (10in)
The IRWIN QUICK-GRIP® HANDI-CLAMP® features a strong ratcheting mechanism that provides a variable clamping pressure of 20kg (44 lbs). The quick-release trigger allows for fast and easy positioning and release. They are manufactured from a durable glass reinforced material and feature non-marking pads to prevent damage to the workpiece when under compression. The ideal clamp for jobs in the workshop, house and garden. Specially designed jaws hold odd-shaped workpieces.1 x IRWIN QUICK-GRIP® HANDI-CLAMP® 38mm (1.1/2in)
