The Bessey EZ360 One-Handed 360 Clamp is extremely versatile. Its innovative 360 turning mechanism allows you to adjust the handle position to the clamping task at hand. A 12-step latching mechanism securely holds the selected handle position. The large clamping surface helps to distribute the clamping force of up to 1,400N. They also feature removable protective caps which help to protect the work piece surface. It can be repositioned for spreading, without additional tools, thanks to a simple release mechanism via push-button on the top part.1 x Bessey EZ360 One-Handed 360 Clamp 150mm.
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH20 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 200mm.Throat Depth: 100mm.Rail: 19.5 x 9.5mm.Weight: 1.11kg.
Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand. Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold. The innovative DuoKlamp makes going from clamping to spreading amazingly easy. This allows you to switch the convenient one-handed clamp from clamping to spreading at any time. Simply turn the knob and youre done. So all you need to do is switch not convert. The DuoKlamp DUO clamping and spreading easily with just one hand! Change from clamping to spreading by switching, not converting.Handle with pump lever parallel to the rail.Convenient one-handed operation, with little effort required.All-round clamping in front of, behind and to the side of the rail. Your benefits at a glance:1 Reversing.Dont disassemble the clamp JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever. The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever.A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces.The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.The Bessey DUO168 has the following: Clamping force up to 1,200NOpening: 160mmThroat Depth: 85mmSpread: 75-235mmF Size: 9-170mmRail: 20 x 5mm Weight: 0.51kg
The Bessey VarioClippix XV Spring Clamps offer variable clamping force and are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self adjusting caps offer secure, non-marking clamping. Manufactured from robust, lightweight, reinforced nylon for ease of handling.The Bessey XV3-50 VarioClippix XV Spring Clamp has the following specification: Opening: 55mmThroat Depth: 37mmWeight: 0.07kg (approx)
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI125 has the following: Clamping force up to 1,200NOpening 250mmThroat depth 80mmRail 20 x 5mmWeight 0.35Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey G12H Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 120mm.Throat Depth: 60mm.Rail: 13.5 x 5.6mm.Weight: 0.49kg.
The Bessey Clippix XC Spring Clamps are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey XC2 Clippix XV Spring Clamp has the following specification: Opening: 25mmThroat Depth: 30mmWeight: 0.02kg
The Bessey Variable Screw Clamps offer flexibility with large clamping widths. They have tempered spindles which are particularly sturdy and wear-resistant. This considerably increases durability. The end fastenings on both sides can be loosened without tools, enabling rapid changeover of the sliding arm for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily. The U-shaped sliding arms are made from forged tempered steel which guarantees the highest level of safety and can withstand extremely large loads. They have heat-resistant pressure plates which can be tilted up to 35° for angled or sloping surfaces. Clamping force: Up to 6,500N.The SLV150M Variable Screw Clamp has the following specifications: Opening: 1500mm.Throat depth: 120mm.Rail: 28 x 11mm.Weight: 5.25kg.
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE100-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 1000mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 225/1130mmWeight: 3.45kg
The Bessey PS55 is an ideal clamp for clamping smooth surfaces such as ceramic, granite, Corian®, plastic boards, glass. There is a lever for compensating differences in height. Opening: 10-55mm. Width: 130mm.Length: 240-295mm. Weight: 1.55Kg.
The Bessey EZ360 One-Handed 360 Clamp is extremely versatile. Its innovative 360 turning mechanism allows you to adjust the handle position to the clamping task at hand. A 12-step latching mechanism securely holds the selected handle position. The large clamping surface helps to distribute the clamping force of up to 1,400N. They also feature removable protective caps which help to protect the work piece surface. It can be repositioned for spreading, without additional tools, thanks to a simple release mechanism via push-button on the top part.1 x Bessey EZ360 One-Handed 360 Clamp 300mm.
Increasingly high clamping pressures, with larger throat depths and wider openings. These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis. Used in steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy.Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle. The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.The Bessey SG50M has the following: Clamping force up to 12,000NTightening torque: 40NmOpening 500mmThroat depth 140mmRail 34 x 13mmWeight 3.40Kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE150-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 1500mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/1610mmWeight: 4.28kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH16 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 160mm.Throat Depth: 80mm.Rail: 16 x 7.5mm.Weight: 0.64kg.
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE80-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 800mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/930mmWeight: 3.1kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey G25H has the following: Clamping force up to 8,000NOpening: 250mmThroat Depth: 120mmRail: 22 x 10.5mm
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G20Z2K has the following:Clamping force up to 5,000NOpening 200mmThroat depth 100mmRail 19.5 x 9.5mmWeight 0.85Kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE60-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 600mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/730mmWeight: 2.76kg
The one-handed clamp EHZ - full power with just one hand This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand e.g. for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes. Not only does the one-handed clamp allow you to hold or fix in place with just one hand, it also allows you to clamp just as powerfully as ever. That means you save both manpower and time. Clamp and fix in place quickly and simply with just one hand. Your benefits at a glance: 1 Parallel handle with pump lever.The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 2 Rapid move button.This button allows you to move the sliding arm at any time, quickly and with minimum effort. 3 Plastic pressure caps The removable plastic caps provide a nonmarring soft-touch for use with wood and finished metal surfaces. 4 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.The Bessey EHZ602K has the following: Clamping force of up to 5,000NOpening: 600mmThroat Depth: 100mmRail: 19.5 x 9.5mm
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G40Z2K has the following:Clamping force up to 5,000NOpening 400mmThroat depth 120mmRail 25 x 12mmWeight 2.00Kg
The BESSEY GearKlamp GK offers the perfect solution for conveniently clamping work even in the tightest spaces. BESSEY's patented design separates the handle from the spindle and positions it around the rail. The GearKlamp's force is transferred due to the concealed internal gear mechanism in the sliding jaw. The V-grooves on the upper section securely hold round, pointed and angular components. Its design is more compact than classic screw clamps, lever clamps and one-handed clamps. Fitted with a 2-component soft grip handle that offers superb comfort and a quick-release button for fast adjustment and release. A swivel pressure plate and protective caps protect the work piece.This BESSEY GearKlamp GK Transmission Clamp has the following specification: Opening: 300mmThroat Depth: 60mmClamping Force: 2,000NRail Section: Width: 25mm, Thickness: 12mmWeight: 0.73kg (Approx.)
The QCG series of clamps feature a small, shaped handle incorporating an easy access release mechanism, enabling improved access into confined spaces. The head is reversible and is fitted with non-marking V groove pads. Maximum clamping force 125 Kg.Maximum Clamping:- 300 mm Maximum Depth:- 70 mm
The QCG series of clamps feature a small, shaped handle incorporating an easy access release mechanism, enabling improved access into confined spaces. The head is reversible and is fitted with non-marking V groove pads. Maximum clamping force 125 Kg.Maximum Clamping:- 150 mm Maximum Depth:- 70 mm
Often copied, never equalled: the original malleable cast iron screw clamps from BESSEY the classic screw clamps dating back to 1936. Unmistakable, thanks to their unique high-quality profiled rail and their characteristic malleable cast iron arms, serrated for reinforcement. The integrated BESSEY anti-slip system additionally ensures maximum safety. This is why the original BESSEY malleable cast iron screw clamps have proved so successful for so many years. And so ideal for all applications where powerful, rigid clamping is required. Try them out for yourself! Your benefits at a glance:1 Integrated BESSEY anti-slip system.Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. 2 Reinforced malleable cast iron arms.The characteristic high-quality malleable cast iron fixed and sliding arms, which are serrated for reinforcement, allow powerful, rigid clamping. The powder coating provides additional protection against corrosion. 3 High-quality profiled rail.The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. 4 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. Noticeably more comfortable.The Bessey TG20-2K Malleable Cast Iron Screwclamp has the following specification: Clamping Force: up to 6,000N.Opening 200mm.Throat Depth: 100mm.Rail: 27 x 7mm.Weight: 1.05kg.
Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 300mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.72kg.
The Bessey EZ360 One-Handed 360 Clamp is extremely versatile. Its innovative 360 turning mechanism allows you to adjust the handle position to the clamping task at hand. A 12-step latching mechanism securely holds the selected handle position. The large clamping surface helps to distribute the clamping force of up to 1,400N. They also feature removable protective caps which help to protect the work piece surface. It can be repositioned for spreading, without additional tools, thanks to a simple release mechanism via push-button on the top part.1 x Bessey EZ360 One-Handed 360 Clamp 600mm.
The one-handed clamp EHZ - full power with just one hand This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand e.g. for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes. Not only does the one-handed clamp allow you to hold or fix in place with just one hand, it also allows you to clamp just as powerfully as ever. That means you save both manpower and time. Clamp and fix in place quickly and simply with just one hand. Your benefits at a glance: 1 Parallel handle with pump lever.The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 2 Rapid move button.This button allows you to move the sliding arm at any time, quickly and with minimum effort. 3 Plastic pressure caps The removable plastic caps provide a nonmarring soft-touch for use with wood and finished metal surfaces. 4 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.The Bessey EHZ302K has the following: Clamping force of up to 5,000NOpening: 300mmThroat Depth: 100mm Rail: 19.5 x 9.5mm
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G25Z2K has the following: Clamping force up to 5,000NOpening 250mmThroat depth 120mmRail 22 x 10.5mmWeight 1.25Kg
The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast.Capacity: 75mm (3in) Throat depth: 32mm (1.1/4in)
The Roughneck TurboClamp™ One-Handed Speed Clamp is suitable for one-handed operation and is ideal for clamping workpieces in the home, workshop or in industry. This clamp operates in the same way as a mastic gun by using the lever and has an instant single handed release. Comes with plastic pad for protecting the workpiece being clamped.1 x Roughneck TurboClamp™ One-Handed Speed Clamp 150mm (6in)
Faithfull Butt Welding Clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring minimal grinding after completion. The clamps are simple to use for assembling and fabricating. Ideal for use when welding patch repairs in floors, wings, door skins or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels. Using the clamps to assemble the workpiece: Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp, with the toggle bar underneath. Tighten the wing nut to pull the toggle bar up locking the two sheets together side by side. Once the two sections have been tack welded together, the wing nut can be slackened and the toggle bar removed, the clamp can then be lifted from the job prior to final welding.
Faithfull Spring Clamps are made from high strength engineering plastic with a durable long-life spring. They are easy to use with a contoured grip for one handed operation. The clamp heads will self-adjust to suit the thickness of the material being clamped. Ideal for all of your general-purpose clamping needs, from holding material whilst fixing, to simple tasks such as securing sheeting or tarpaulins. This8 Piece Set contains: 4 x 2in (50mm) Spring Clamps, Clamping Capacity: 12kg. 4 x 3in (75mm) Spring Clamps, Clamping Capacity: 15kg.
The Faithfull G Clamp is made from malleable SG iron, making it suitable for a wide variety of metalworking and woodworking applications. Accurately machined spindles provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion.1 x Faithfull Medium-Duty G Clamp 75mm (3in)
The IRWIN QUICK-GRIP® HANDI-CLAMP® features a strong ratcheting mechanism that provides a variable clamping pressure of 20kg (44 lbs). The quick-release trigger allows for fast and easy positioning and release. They are manufactured from a durable glass reinforced material and feature non-marking pads to prevent damage to the workpiece when under compression. The ideal clamp for jobs in the workshop, house and garden. Specially designed jaws hold odd-shaped workpieces.1 x IRWIN QUICK-GRIP® HANDI-CLAMP® 100mm (4in)
