Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 225mm (9in)
Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place.
Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time.
By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe.
• Connects two 15mm pipes quickly and securely
• Install or demount in seconds by hand
• Easier to install in confined spaces – no hot works or tools required
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0415W
Warranty (years) 50
Diameter (mm) 15
Pack Size 2
Fitting Type Coupler
Equal or Reducing Equal
Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldnÕt be easier to use Ð simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because thereÕs no need for hot works and tools. Demounting the connection is simple too Ð you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. ¥ Connects two 15mm pipes quickly and securely ¥ Install or demount in seconds by hand Easier to install in confined spaces Ð no hot works or tools required ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe ¥ Minimum operating temperature of 20 ¡C ¥ Maximum operating temperature of 105 ¡C ¥ Maximum operating pressure at minimum temperature of 12 bar ¥ Maximum operating pressure at maximum temperature of 3 bar ¥ BS EN 7291 Parts 1, 2, 3 and S ¥ WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0415W Warranty (years) 50 Diameter (mm) 15 Pack Size 5Fitting Type Coupler Equal or Reducing Equal
The Wiha Classic Plier Set covers a wider variety of applications. Contains the following: 1 x Pair of Classic Combination Pliers. Made from high-quality C 70 tool steel, tempered. With extra long cutting edge for flat and round cables. OptiGrip; 'three-point support' ensures optimum hold of the workpiece when working. Cutting edges additionally induction hardened to approx. 64 HRC. The Wiha DynamicJoint ensures manual force is optimally transferred to the cutting edges. Conforms to ISO 5746. Size: 180mm.Wire Capacity (mm): Med. Hard: 3.4mm, Hard: 2.2, Hardened Spring Steel: 1.8mm. 1 x Pair of Diagonal Cutters. Made from high-quality C 70 tool steel, tempered. Size: 160mm.Max. Cutting Ø: 2mm. 1 x Pair of Needle Nose Piers. Made from high-quality C 70 tool steel, tempered. With an extra long cutting edge for flat and round cables. Gripping surfaces are partially serrated. Cutting edges additionally induction hardened to approx. 64 HRC. Fitted with Classic Wiha grips for increased comfort. Conforms to ISO 5745. Size: 160mm.Wire Capacity (mm): Med. Hard: 2.5mm, Hard: 1.8, Hardened Spring Steel: 1.2mm.
The 6 Piece Wiha electrician Tool Set contains a selection of tools which cover the most common applications for electricians. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC.Supplied in a folding tool bag, features a zip, carrying handle and pockets for hand tools. Provides plenty of storage space and an orderly arrangement. Contains the following: 3 x electric SoftFinish Slotted Screwdrivers: 3.5 x 100mm, 4.5 x 125mm & 5.5 x 125mm. 2 x electric SoftFinish Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 160mm.
The Wiha SoftFinish electric slimFix Slotted Screwdrivers come with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900.1 x Wiha SoftFinish electric slimFix Screwdriver Slotted 4.5 x 125mm.
Powerful, fast-acting antibacterial specialist cleaning spray, which contains the 4x4 grime-busting formula as used in all the Big Wipes 4x4 hand cleaning wipes. The unique biodegradable, water-based formulation of 4x power cleansers ensures the removal of paint, adhesives, oil, sealants, silicones, PU foam and general grime. Preservative-free and designed to meet tough EU Regulation 1223/2009 for Cosmetic Products, Big Wipes Power Spray contain 4x skin conditioners - Aloe Vera, Lanolin, Vitamin E and Glycerine – all helping to nourish and protect the skin. Usage: Use without water for heavy-duty cleaning of surfaces, tools and hands. Ideal for cleaning or pre-treating larger areas such as walls, floors or window frames before wiping clean. Also perfect for ‘re-charging’, or using in conjunction with, any of the 4x4 hand cleaning Big Wipes.
The Wiha TorqueVario-S electric Screwdriver System provides controlled screw tightening combined with safe use for electric installations. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. This 19 Piece Set contains the following: 1 x TorqueVario-S electric Screwdriver Handle. Covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. 1 x Setting Tool with Long Handle 90mm. 1 x TorqueVario-S electric Adaptor. 4 x Slotted slimBit electric Blades: 2.5 x 75mm, 3.5 x 75mm, 5.5 x 75mm & 6.5 x 75mm. 2 x Phillips slimBit electric Blades: PH1 x 75mm & PH2 x 75mm. 2 x Pozidriv slimBit electric Blades: PZ1 x 75mm & PZ2 x 75mm. 5 x TORX slimBit electric Blades: T9 x 75mm, T10 x 75mm, T15 x 75mm, T20 x 75mm & T25 x 75mm. 2 x PlusMinus/Pozidriv slimBit electric Blades: SL/PZ1 x 75mm & SL/PZ2 x 75mm. 1 x Folding Case. Made from high-grade, hard-wearing materials. All components are arranged practically so they are easy to identify.
The ABUS 54TI Series TITALIUM™ Padlocks are the entry level padlock of the TITALIUM™ range. They have a solid lock body made from TITALIUM™ aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Fitted with a hardened steel double locking shackle, which resists saw attack, they offer optimum security against lower theft risks. 40mm and above are fitted with a 5 pin tumbler cylinder. They offer optimum security against lower theft risks. Ideal for bags, suitacases, lockers, toolboxes etc.This ABUS 54TI/50 TITALIUM™ Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 25mm.Shackle Height: 24.5mm.Shackle Diameter: 7mm. Overall Width: 50mm.Overall Height: 68mm.Overall Depth: 14mm.
The Wiha PicoFinish Slotted Fine electric Screwdrivers come with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision fastening tasks for electrical installations and live parts. Manufactured according to IEC 60900.1 x Wiha PicoFinish Slotted Fine electric Screwdriver 2.5 x 65mm.
These Wiha Craftsman's Cutters are the ideal companion for electricians out on jobs. The shears offer all-purpose use with their four functions: stripping, skinning, crimping and cutting to length. A notch behind the shear pivot makes it easy to crimp wire-end sleeves between 1 and 5mm².Ergonomic handles with extra large handle holes makes handling easy. The shears can be conveniently attached to a belt, ready for use. Supplied with a protective cover for safe carrying. Specifications: Overall Length: 160mm.Max. Cross-sectional Area: 50mm².
The Primaflow Fibre Washer 1/2" is a reliable solution for various plumbing needs. Designed for durability and efficiency, this washer ensures a tight seal to prevent leaks.
High-Quality Fibre Material for Long-Lasting Use
1/2" Size Fits Standard Plumbing Applications
Easy to Install, No Special Tools Required
Provides a Secure Seal to Prevent Leaks
Ideal for DIY Projects and Professional Use
The ABUS 54TI Series TITALIUM™ Padlocks are the entry level padlock of the TITALIUM™ range. They have a solid lock body made from TITALIUM™ aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Fitted with a hardened steel double locking shackle, which resists saw attack, they offer optimum security against lower theft risks. 40mm and above are fitted with a 5 pin tumbler cylinder. They offer optimum security against lower theft risks. Ideal for bags, suitacases, lockers, toolboxes etc.This ABUS 54TI/40 TITALIUM™ Padlock is supplied carded has the following specification: ABUS Security Level: 3. Shackle Width: 20mm.Shackle Height: 21mm.Shackle Diameter: 6mm. Overall Width: 38mm.Overall Height: 57mm.Overall Depth: 13mm.
The Wiha SoftFinish Pozidriv Screwdriver comes with a round Chrome vanadium steel blade, matt chrome plated. A patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the the German Campaign for Healthier Backs. The unique Wiha handle-length concept provides optimum balance of torque and control.1 x Wiha SoftFinish Screwdriver Pozidriv size PZ2 x 100mm.
The Wiha Magnetiser/Demagnetiser for magnetising and demagnetising blades and blade-like tools made of steel. The tool's strong permanent magnet has an extremely long service life and is also suitable for magnetising tweezers and other steel tools. Specification: Dimensions (BxHxD): 52 x 50 x 29mm.
The Wiha TorqueVario-S electric Screwdriver provides controlled screw tightening combined with safe use for electric installations. Covers a wide variety of applications with a torque range between 0.8 and 5.0Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements.The insulated ClicFix bit holder guarantees a secure hold for 75mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. All components are arranged practically in a high-grade, hard-wearing box, where they are easy to identify. Supplied with: 1 x Setting Tool for torque screwdriver 90mm.1 x TorqueVario-S electric Adapter for slimBits 6.0mm.2 x 75mm slimBit electric PlusMinus/Pozidriv Bits: SL/PZ1 & SL/PZ2.
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/60 TITALIUM™ Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 34mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 60mm.Overall Height: 91mm.Overall Depth: 19mm.
Designed with two extra o-rings, these Superseal pipe inserts deliver an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. Each of the inserts in this pack of 25 provides valuable extra support for your pipework, ensuring that pipe ends keep their round shape.
• Suitable for JG Speedfit pipes and fittings only
• Two extra o-rings provide improved sealing
• Creates a rigid connection and provides extra support to pipework
• Suitable for hot and cold water services
• Can be used on central heating systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Standard TSM inserts must be used when connecting to a compression fitting
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID STS22
Warranty (years) 50
Diameter (mm) 22
Pack Size 2
Fitting Type Pipe Inserts
This Wiha Voltage Detector is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components, for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.This ABUS 70IB/45HB63 Aqua Safe Brass Padlock has the following specification: ABUS Security Level: 5. Shackle Width: 20mm.Shackle Height: 63mm.Shackle Diameter: 8mm. Overall Width: 49mm.Overall Height: 112mm.Overall Depth: 28mm.
The ABUS GRANIT™ Plus Padlocks offer the highest protection against manipulation. The cylinder is inserted from the top offering optimum drill and pull resistance. The body and shackle are both made from hardened alloy steel with a cataphoretic coating and rust free components which give 40 years of corrosion protection. All GRANIT™ padlocks endure a -40° freeze and impact test, and are bolt cutter, drill and saw resistant. Ideal for securing valuables/goods of great value or at a very high risk of theft, warehouses, factory gates, containers and lorries. Meets special requirements of insurance companies.This ABUS Granit™ Plus Padlock is supplied with 2 keys, 1 has an LED light. Specification Pull Resistance: 6 Tonne.ABUS Security Level: 10. Shackle Width: 27.5mm.Shackle Height: 26mm.Shackle Diameter: 11mm. Overall Width: 63mm.Overall Height: 85mm.Overall Depth: 31mm.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/50 Brass Padlock is supplied as a carded twinpack and has the following specification: ABUS Security Level: 6. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 7mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 18mm.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/40 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 22mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.
The ABUS 190 Series Heavy-Duty Combination Padlock with a 4-digit resettable combination. The all new combination mechanism improves reliability and the positive code wheel action reduces code setting errors. It has a solid hardened steel jacket to resist physical attack, a through hardened steel shackle which resists hacksaw attacks, a black chrome shackle for better corrosion resistance and ball bearing locking which gives protection against pulling and twisting attacks. Body Dimensions: 62 x 95 x 22mm.Shackle Dimensions: 27 x 30 x 11mm.
The ABUS 55 Series Brass Padlocks have inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available.This ABUS 55/50 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 25mm.Shackle Height: 24mm.Shackle Diameter: 7mm. Overall Width: 48mm.Overall Height: 68mm.Overall Depth: 14mm.
Main Product Description:
The FloPlast 65mm Square 112.5 Degree Offset Bend in Black is a high-quality, durable, and lightweight component suitable for both new build and refurbishment projects. Its sleek rectilinear profile adds aesthetic appeal to any building design. With its push-fit connection, it provides a practical and easy-to-install system that connects seamlessly with Square Line and Niagara Ogee gutter systems. The 10-year performance and colour guarantee ensures long-term reliability, while its compliance with BS EN 12200-1 standards guarantees safety and efficiency.
Additional Features & Benefits:
- Suitable for domestic and commercial buildings.
- Non-conductive to lightning, making it safer than metallic systems.
- Consistent colouring and low maintenance.
- Tough and lightweight for easy installation.
- Can withstand normal ladder weight.
- High gloss finish with a blemish-free surface, providing excellent weathering and colour fastness.
- Wide range of systems, colours, and fittings to cater to various installation requirements.
- Cost-effective solution for rainwater collection and drainage.
- Stylish contours that match the architecture of all properties.
- Manufactured to BS EN 12200-1 standards.
- Complies with BS EN 681 for elastomeric seals.
- Designed and manufactured to BS EN 607, BS EN 12200, and BS EN 1462 standards.
- Available in multiple colour options.
- Connects to Square Line and Niagara Ogee rainwater systems.
- FloPlast 10-year colour and performance guarantee.
- Covered by BSI Kitemark – no. KM501316.
Main Product Description:
Introducing the FloPlast ABS Solvent Weld 90' Conversion Bend in 40mm diameter, designed for efficient waste management solutions. This high-quality product is made from durable ABS material, offering a clean gloss finish that complements any installation. The 90-degree bend allows for seamless connections between pipes and waste traps, making it an ideal choice for confined spaces.
Features:
- Diameter: 40mm
- Material: ABS
- Color: Black
- Finish: Clean gloss
- Angle: 90 degrees
- Length: 126mm
- Width: 46mm
- Compatibility: Works with FloPlast's solvent weld systems
Benefits:
- Durable and long-lasting ABS construction
- Easy to install and maintain
- Suitable for various waste management applications
- Enhances the aesthetic appeal of your plumbing system
Main product description:
FloPlast Half Round 75mm Gutter External Stop End Black
Features:
- Designed for use with 75mm half round gutters
- Ideal for garages, sheds, summer houses, and other garden buildings
- Pre-lubricated seals for easy installation
- Available in black color
Benefits:
- Compatible with various gutter sizes
- Suitable for different building types
- Ensures smooth operation with pre-lubricated seals
- Enhances the aesthetic appeal with its black finish
Main Product Description:
The FloPlast Underground Drain 110mm Double Socket Coupler is designed to create a connection between unsocketed pipes and fittings, providing an efficient means of wastewater drainage and foul discharge from above ground drainage systems. It is manufactured in PVC-U to ensure strength and durability while being lightweight and easy to install.
Features:
- Suitable for high temperature waste discharge
- Can be used as a slip coupling with a removable center stop
- Joins two plain-ended underground pipes together
Benefits:
- Provides an efficient method for wastewater drainage and foul discharge
- Ensures a secure connection between pipes and fittings
- Made from durable PVC-U material for long-lasting performance
Main Product Description:
Introducing the FloPlast 112mm Round Gutter Pipe with a 90-Degree Angle in Grey color. This high-quality gutter pipe is made from durable PVC-U material that is non-ignitable and does not support combustion. It comes with a pre-lubricated seal for improved installation and performance. The grey finish complements various roofing styles and architectural designs, making it an excellent choice for your property's drainage needs.
Features:
- Made from fire-resistant PVC-U material
- Pre-lubricated seal for easy installation
- Suitable for both internal and external corners
Benefits:
- Non-combustible and safe for residential and commercial properties
- Improved ease of installation with pre-lubricated seals
- Versatile design suitable for different types of buildings
Main Product Description:
The FloPlast Soil Universal Pipe Connector is designed for use with soil, clay, cast iron, and drainage systems. It provides a versatile solution for connecting different types of pipes, ensuring efficient waste management and plumbing applications.
Features (not included in the main product description):
- Compatible with various piping materials: The connector can be used with soil, clay, cast iron, and drainage pipes, making it suitable for diverse plumbing projects.
- Easy installation: Users can simply push the finned end of the adapter into the clay or cast iron pipe, allowing for quick and straightforward setup.
Benefits (not included in the main product description):
- Improved efficiency: By providing a universal connection option, the FloPlast Soil Universal Pipe Connector streamlines the process of connecting different types of pipes, saving time and effort during installation.
- Enhanced durability: Its compatibility with various piping materials ensures that the connector can handle a wide range of conditions, contributing to its longevity and reliability.
The Floplast Male Adaptor is designed for reliable connections in plumbing systems. This adaptor features a 25mm MDPE end and a 1" MI end, making it versatile for various applications.
Durable Construction: Made from high-quality materials for long-lasting use.
Easy Installation: Designed for quick and straightforward fitting.
Versatile Use: Suitable for a range of plumbing applications.
Secure Connections: Ensures a tight fit to prevent leaks.
Compatible Design: Works well with standard plumbing systems.
Introducing the FloPlast ABS Solvent Weld Waste White Tank Connector 40mm (Product Code: 225401) – a reliable and versatile solution for your plumbing needs. This tank connector is designed to provide a secure and seamless connection in your plumbing system.
Key Features:
Size: Tailored for 40mm pipes, the ABS Solvent Weld Tank Connector (225401) ensures a precise fit in your plumbing configuration.
Material: Crafted from high-quality ABS (Acrylonitrile Butadiene Styrene), this tank connector offers durability and resistance to impact, ensuring long-lasting performance.
Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics.
Solvent Weld Connection: Engineered for secure solvent weld connections, providing a reliable and leak-free joint for your plumbing setup.
Versatile Application: Suitable for a variety of plumbing installations, this tank connector offers flexibility in adapting your plumbing system to different configurations.
Benefits:
Precise Fit: Tailored to 40mm pipes, this tank connector ensures a precise and secure fit, contributing to the efficiency of your plumbing system.
Durable Construction: Crafted from high-quality ABS, this connector is built to withstand the demands of plumbing applications, ensuring longevity and resistance to impact.
Corrosion Resistance: The ABS material is resistant to corrosion, ensuring a clean and unobstructed water flow through your plumbing system.
Aesthetic Appeal: The white finish adds a clean and professional look to your plumbing setup, enhancing the overall aesthetic of your installation.
Versatility: The tank connector's design allows for versatile application, making it suitable for various plumbing configurations and installations.
Upgrade your plumbing system with the FloPlast ABS Solvent Weld Waste White Tank Connector 40mm (225401) – a reliable and versatile solution that combines durability with ease of installation, ensuring efficient and secure plumbing connections in your network.
1/2 Sized Punched Sanding Sheets with Hook & Loop backing. Made from aluminium oxide on a flexible E-weight paper backing. These sheets are cut to the correct size and shape. Size: 115 x 230mm.Grit: Assorted.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-251 FatMax® Thru Tang Chisel is 6mm (1/4 inch) in width and 125mm in length
Main Product Description:
The FloPlast Push Fit Waste Tee is a versatile and reliable solution for connecting two wastepipes at a 92.5-degree angle in a wastewater system. It is available in both 32mm and 40mm diameter options and is made from polypropylene, ensuring durability and compatibility with various materials and systems. The push-fit ring seal system allows for easy installation without the need for solvent welding, making it a convenient option for construction projects.
Additional Features and Benefits:
- Easy Installation: Designed for quick and effortless connection, reducing installation time and labor costs.
- Secure Connection: The push-fit ring seal system ensures a tight and secure connection between the wastepipes, preventing leaks and maintaining system integrity.
- Compatibility: Suitable for use with a wide range of materials and systems that conform to British and European standards, providing flexibility in design and integration.
- Durability: Constructed from robust polypropylene, which offers resistance to wear and tear, ensuring long-lasting performance.
