The Vitrex Mixing Paddles are designed to mix sticky and viscous materials, such as tile adhesive, bonding mortar, jointing compound, ready mixed plaster, floor screed and fillers. Suitable for use with the MIX850 Power Mixer and MIX1400 Power Mixer.The Vitrex MIXADH140 Mixing Paddle has the following specifications: Blade Diameter: 140mm.Length: 600mm.
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 5The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
The Vitrex SRF005 Silicon Remover & Finisher Kit is a multi-functional, all-in-one kit for a professional looking finish to most household sealants, silicone, fillers and grout, etc. It is quick, easy and clean to use. The finisher has a choice of 5 easy-change finishing profiles (3R, 6R, 10R, 13R and 17R). The silicon remover has a small cleaning tip for detailed and precision work.
This Vitrex power mixer is ideal for mixing cement, plaster, grout and adhesives, fillers, paint plus other mortars for construction. The mixer is lightweight for comfortable handling and carrying, and has adjustable and lockable speed control for continuous operation. The metal handle acts as a rest when placing the mixer down, thus protecting the mixer head. Specification Mixing Paddle: 120mm, M14 Thread.Input Power: 850 Watt.No Load Speed: 0–550/min.Weight: 3.9kg.Vitrex Power Mixer 850 Watt 240 Volt Version.
Vitrex Tile Trowel with U & V Notches. It is made from lightweight plastic with a comfortable ergonomic handle. Dual edged for use with bonding and floor tile adhesives. Size: 115 x 278mm (11 x 4.1/2in) This Vitrex Notched Adhesive Trowel has been designed for use with wall and floor tile adhesives. Ideal for installing underfloor heating. Specification: Size: 115 x 280mm (11 x 4.1/2in)V Notches: 6mmU Notches: 20mm
The Vitrex 10 2913 Dual Purpose Grouting Sponge is a large 2-in-1 sponge ideal for cleaning and polishing tiles. Rounded edges to prevent accidental removal of fresh grout.
PlastiKote Trade Leak Detector Spray for the detection of leaks in gas pipes. It has a non-combustible, non-corrosive formula that can be removed with water.
Blackfriar Chalkboard Paint produces a chalkboard surface with a durable matt black finish. It resists ghosting allowing for clear, legible chalk writing. Ideal for creating new or renovating old chalkboards. Application method: brush and spray. Coverage: 14m²/L/CoatTouch Dry: 16 hoursHard Dry: 16 hoursRe-coatable: 16 hoursBlackfriars Chalkboard Paint. Size: 500ml
This KIP 232 Plastic Masker Tape is made from environmentally friendly PE film. The film attaches itself to the substrate through static charge. Designed for quick and full covering and masking of large surface areas. Ideal for masking walls, windows, doors and furniture. Perfect for use with emulsion and when spray painting. Can be applied up to 4 days before use. For best results remove immediately after painting.
1 x KIP 232 Plastic Masker Tape 1.4 x 33m.
The Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life.Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Specification: Cutting Depth: 41mm.1 x Starrett Fastcut Bi-Metal Holesaw 111mm
The Vitrex 332100 Safety Spectacles are made of clear polycarbonate and have ventilated side-arms. They are both impact and abrasion resistant. Suitable for various applications including woodwork, home renovation and for use with most domestic power tools. The Safety Spectacles will fit over most prescription spectacles and Conform to EN166.
(Alternative Stock Code: XCPC) 6A Pull Switch Chrome Effect, 1- or 2-way switching using a pull cord, Can be installed in bathrooms, toilets and shower rooms (IP20), Can be installed in bathrooms, toilets and shower rooms (IP20).Dimensions
Height: 84mm
Width: 84mm
Depth: 35mm
Varilight Urban is a new collection of dimmers, switches and sockets available in four exciting finishes, inspired by the latest trends in urban interior design: stylish Brushed Bronze, Matt Black, Brushed Brass; plus the already available, and extremely popular, Polished Copper. The V-Pro series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. These dimmers do not work with lighting panels (LED or CFL). Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. -0W-120W (max. 10 LEDs) -Fits in a 25mm Deep Wall Box - V-Pro dimmers are not suitable for wire-wound "toroidal" transformers. -Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series you are able to adjust the minimum brightness setting. -The Best Dimmer for Most Good Quality Dimmable LEDs. -To clean product, we recommend only using a microfiber cloth.
_V-Pro intelligent dimming technology
_Soft start feature and intelligent overload protection
_Adjustable minimum brightness setting and choice of driving modes
_Bevelled edge faceplate
The Varilight Georgian range has a roped finish on the edge of the plate. Covered by the Varilight 10 year guaranty. Single plate size: 95mm x 95mm. Double plate size: 95mm x 155mm. 13A Plug sockets: Require a 25mm deep wall box. USB sockets are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fused Spur
_13A Switched Fused Spur with Metal Inserts
_Double pole switching
_Holds standard 25.4x6.4mm fuse
_Replaceable 13A fuse included
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_light switch
XDB93S
_2-Way Rocker Switch
_3-Gang 10A 1- or 2-Way Rocker Switch (Twin Plate)
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Sleek, low-profile screwless faceplate
The Varilight Victorian raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_TV Socket
_1-Gang TV Socket, Co-Axial
_TV socket for use with male co-axial plugs
_Bevelled edge faceplate
The new Varilight Primed range of dimmers, switches and sockets feature faceplates primed with an undercoat and are ready to paint. You can now create switches and sockets in exactly the colour you want. Simply clip off the faceplate, apply your paint effect, wait for the paint to dry and then clip the faceplate back on.
_Primed Ready to Paint Varilight Range
_Used to cover unused wall boxes
_Sleek, low-profile screwless faceplate
Varilight Dimension Screw less flat plate power sockets form part of a contemporary range of switches and sockets that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight switched screw less flat plate power socket 13 Amp, 1 or 2 gang
_Finishes: Many to choose from
_Double pole
_Rated at 13 Amp
Varilight Power Grid dimmer module that can be used to dim larger amounts LED downlights and dimmable GU10 LEDs than V-Pro. Varilight V-Com module is suitable for dimming 180W of LED without needing to be de-rated like other conventional dimmer switches.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique 2 range which utilises a master and slave touch dimmer.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
_Contains leading edge V-Com dimming technology
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
Varilight classic 10 amps 1 or 2 way toggle switches with roped edge faceplate. Suitable for controlling both mains and low voltage lighting. Toggle switches is available in a two finishes and gang options.
_Choose stylish finishes options: - Antique Georgian - Georgian Brass
_Available in gang options: - 1-Gang - 2 Gang - 3 Gang
_Insert colour: Brass
_Range: Classic
The Varilight Dg RJ11 Module is designed for seamless data connections in your home or office. This module fits perfectly into a DataGrid space, ensuring a clean and professional installation.
High-Quality Construction: Built to last with durable materials.
Easy Installation: Fits into standard DataGrid spaces for quick setup.
Versatile Use: Ideal for various data connection needs.
Compact Design: Space-saving module that blends with your decor.
Reliable Performance: Ensures stable and efficient data transmission.
The Varilight Es 1-Gang 10A Intermediate Rocker Switch is designed for seamless control of your home lighting. This stylish switch combines functionality with a modern aesthetic, making it a perfect addition to any room.
High-Quality Build: Crafted from durable materials for long-lasting performance.
Easy Installation: Designed for straightforward installation, suitable for both DIY enthusiasts and professionals.
Versatile Use: Ideal for controlling lighting in various settings, including homes and offices.
Modern Design: Features a sleek rocker design that complements contemporary interiors.
Reliable Performance: Rated for 10A, ensuring dependable operation for your lighting needs.
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plastic plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_Grid Pack (Plate and Yoke)
_3-Gang Screwless PowerGrid Plate including Yoke (Twin Plate)
_Create your own switch combinations
Varilight Dimension Screw less flat plate power sockets form part of a contemporary range of switches and sockets that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight switched screw less flat plate power socket 13 Amp, 1 or 2 gang
_Finishes: Many to choose from
_Double pole
_Rated at 13 Amp
The Matt Black finish is powder-coated to give a tactile, textured finish, which is tough, durable and resistant to fingerprints. Varilight decorative wiring accessories are British made and covered by the Varilight lifetime guarantee.
