Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish. Fitted with a 32 tpi blade for metal cutting. Blade length: 150mm (6in).
Doff Slug & Snail Adhesive Copper Tape is a chemical-free alternative to protect plants from slugs and snails. The copper causes an unpleasant shock-like sensation when slugs and snails touch the tape, preventing them from crossing it. Ideal for sticking around pots, planters, containers and raised garden beds. Length: 4m.
The Faithfull Essentials Hand Bulb Planter has a spring loaded design for easy one-handed use. The planter features a durable plastic handle, fitted to a 65-77mm steel core cutter, with a deeply serrated cutting edge that helps penetrate packed ground cleanly. Side graduations allow for precise depth control, the removed soil core is simply released by pushing the spring loaded handle. Suitable for planting bulbs and bedding plants. Head Diameter: 65-77mm
This Faithfull 8 Pocket Chisel Roll is made from water-resistant, high-quality suede leather which is double stitched at stress points. Fitted with a long ribbon tie. Suitable for chisels and other small tools. NOTE: Tools NOT included.
The Faithfull 4-Way Services Utility Meter Key is made from chrome vanadium steel for strength and durability. It features four popular key shapes: square, triangular and two-way. Suitable for use on radiator taps, gas and electricity meter doors. An essential item for many tradesmen.
Powerstream unvented inline instantaneous water heaters provide a continuous regulated flow of instantly heated water for hand washbasin use.
Small and compact inline instantaneous water heater ideal for hand basin supply
Design allows for installation in 4 different orientations giving flexibility to installers
Instantaneous heating at point of use, eliminates long inefficient pipe run heat loss to a centrally located cylinder, saving space and energy
Suitable for two hand wash basins or a manual mixer shower and hand basin (with the RM2 accessory)
A Energy efficiency rated
Manufacturers 2 year UK guarantee
Connects a supply to a tap or other fixture or appliance
JG Speedfit elbow pattern flexi hose (braided) that connects the water supply to a male thread appliance. On one end the hose features a push-fit connection for a supply pipe. On the other end there is a 90 degree bent nut which can be tightened on to a side entry tap, toilet or male thread. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit elbow pattern flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
Where to buy
The McAlpine Trap Inlet Reducer 1.1/2"X1.1/4" T16 is a plumbing fitting used to reduce the size of a trap inlet from 1.1/2 inches to 1.1/4 inches. The "T16" in the description refers to the specific model of the trap inlet reducer, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The reducer has a 1.1/2 inch end that fits over the trap inlet and a 1.1/4 inch end that connects to the pipe. The trap inlet reducer is designed to create a secure, leak-free connection between the trap inlet and the pipe.
Overall, this type of fitting reducer is commonly used in plumbing applications where a trap inlet needs to be reduced in size to connect to a smaller pipe. The McAlpine Trap Inlet Reducer 1.1/2"X1.1/4" T16 is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
・ Available in 2 sizes
The McAlpine 90mm Long Ferrule is a plumbing component used for connecting a waste pipe to a soil stack or a branch pipe in a waste and drainage system. The ferrule has a length of 90mm, which allows for a secure and tight connection between the two pipes.
Made from high-quality materials, the McAlpine 90mm Long Ferrule is durable and long-lasting. It is designed to withstand the harsh conditions of waste and drainage systems, and to provide a reliable connection between pipes.
The ferrule is easy to install, with a simple push-fit mechanism that ensures a secure and watertight seal. It can be used with a variety of pipes, including PVC, ABS, and cast iron, making it a versatile solution for a range of plumbing applications.
Overall, the McAlpine 90mm Long Ferrule is a reliable and effective plumbing component that provides a secure and watertight connection between waste pipes and soil stacks or branch pipes. It is easy to install and maintain, and is designed to withstand the demands of a waste and drainage system.
・ Manufactured in Nickel Plated Brass
・ Other sizes available
The McAlpine TSGCONTV Conversion Kit is a plumbing product designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. The kit includes a white plastic clamp ring, cover plate, and dip tube.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTV conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a safe and secure flooring solution for your commercial or industrial environment.
Overall, the McAlpine TSGCONTV Conversion Kit is a reliable and effective product that is designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
The McAlpine BSW10P Centre Pin Bath Waste is a plumbing accessory designed for use in bathtubs. Here's a breakdown of its key features:
Centre Pin: The centre pin refers to the mechanism that controls the flow of water through the waste. In this case, it's a "pop-up" style waste, meaning that when you push down on the centre pin, the waste will open and allow water to drain out of the bathtub. When you push down on the pin again, it will pop back up and close the waste.
Bath Waste: A bath waste is a plumbing component that connects the drain in the bathtub to the plumbing system of the building. It's designed to allow water to drain out of the bathtub, while also preventing any debris or other items from clogging the pipes.
70mm Stainless Steel Flange: The flange is the part of the waste that sits on top of the bathtub and secures the waste in place. In this case, the flange is made of stainless steel, which is a durable and corrosion-resistant material.
Black PVC Plug: The plug is the part of the waste that seals the drain when the waste is closed. In this case, the plug is made of black PVC, which is a type of plastic that's known for its strength and durability.
Overall, the McAlpine BSW10P Centre Pin Bath Waste is a high-quality plumbing accessory that's designed to provide reliable performance and long-lasting durability.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
Dual-sided ‘scrub & clean’, industrial strength, antibacterial, heavy-duty cleaning wipes with Quad Fabric, ideal for use on the toughest stains and most ingrained dirt. Heavy-Duty wipes offer the perfect fabric combination: Scrub face - The enhanced scrubbing power of the abrasive surface drives the powerful Big Wipes 4x4 formula deep into the dirt to speed up cleaning. Smooth face - The smooth face now has an absorbency of 7.93 gr/gr, which equates to a fabric absorbing quality of almost 800%! This results in the muck being soaked up and trapped in the wipe, leaving your hands, tools and surfaces cleaner than ever. The unique biodegradable, water-based formulation of 4x power cleansers ensures the removal of paint, adhesives, oil, sealants, silicone’s, PU foam and general grime from hands, tools and surfaces. Preservative-free and designed to meet tough EU Regulation 1223/2009 for Cosmetic Products, Heavy-Duty wipes contain 4x skin conditioners - Aloe Vera, Lanolin, Vitamin E and Glycerine – all helping to nourish and protect the skin. Use without water for heavy-duty cleaning of hands, tools and surfaces. The scrub face of the wipe removes even the most stubborn grime, while the smooth face absorbs any excess. Ideal for trades people on the move.The reusable bucket of 240 wipes is suitable for heavy and frequent usage and ideal for vans, workshops, Engineering Contractors, Maintenance Departments and so many more.
Restore smooth and reliable operation to your waste system with the McAlpine Sink Bath Clicker Plug Waste Spring MECHANISM ONLY for Click Clack Plug. This genuine replacement spring mechanism is designed specifically for McAlpine clicker plug (click clack) waste fittings used in sinks and baths.
If your plug is no longer clicking open or closed properly, this high-quality spring mechanism offers a simple, effective solution. Built to last and easy to install, it brings your clicker plug system back to optimal performance without needing to replace the entire waste unit. Ideal for repairs and maintenance, this spring mechanism keeps your waste system functioning like new with minimal effort.
Fiskars Solid™ Grass Shears for trimming lawn edges and hedges. Fitted with non-slip handles for a comfortable, secure grip. Specification: Length: 31.5cmWidth: 8.5cmHeight: 4.5cmWeight: 0.32kg
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 10Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
The McAlpine T12H is a coupling fitting that connects a 1 1/2-inch female BSP (British Standard Pipe) threaded pipe to a 1-inch male BSP threaded pipe. This coupling is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
It's important to note that BSP threads are used primarily in Europe and Asia, while the US typically uses NPT (National Pipe Thread) or NPS (National Pipe Straight) threads. Therefore, if you are in the US or another country that primarily uses NPT or NPS threads, you may need to use an adapter or different type of fitting to connect your pipes.
・ Available in 9 sizes
・ Waste Outlet Reducer
1 x 200g Trollull Steel Wool Grade 1. This medium grade is suitable for a variety of uses, e.g. to remove old paint from antique furniture with the aid of solvents, sand down wood, clean hard rubber floor surfaces, and smooth down plasterboard panels.
This Roughneck® Round Shovel has a sharp serrated edge, ideal for digging in compacted ground, slicing through roots and opening bulk bags or bags of cement. The long fibreglass handle is fitted with a contoured grip, it offers increased leverage and power, allowing for a more comfortable, upright position to be maintained whilst digging. Perfect for deeper holes and trenches. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 225mmOverall Length: 1460mm (57.1/2in)
The ROUGHNECK Micro Bulk Shovel is perfect for efficiently moving material from bulk bags, as well as working in confined spaces. Built to last and constructed from heavy-duty carbon steel with a durable, corrosion-resistant tumble lacquered finish. The Power Ring socket guarantees a robust blade-to-handle connection, while an extra handle socket plug further enhances strength and prevents debris buildup. With a fiberglass handle for reduced weight and a soft-grip full-size 'D' grip for comfort during use. Specification: Size: 710mm (28in).
The Faithfull Bassine Broom has a 30cm (12in) head. Bassine is a natural material made from dried palm leaves. It provides good sweeping performance, best used in dry conditions as it can distort if used wet. Specification: Broom Head: 30cm (12in)Handle Length:1.22m (48in)
The Gripit Multi Pack includes a selection of 16 x Plasterboard Fixings, ideal for fixing a variety of objects to plasterboard walls. Easy to install. Contains: 4 x Gripit Yellow 15mm (Max. Hold 71kg) with 4 x Screws 4.0 x 25mm. 4 x Gripit Red 18mm (Max. Hold 74kg) with 4 x Screws 5.0 x 30mm. 4 x Gripit Brown 20mm (Max. Hold 93kg) with 4 x Bolts M6 x 30mm. 4 x Gripit Blue 25mm (Max. Hold 113kg) with 4 x Bolts M8 x 30mm.
Ronseal 10 Year Weatherproof 2-in-1 Wood Paint protects your exterior wood for up to 10 years. You don’t need a primer either, so you can get the job done quickly and you won’t have to do it again anytime soon. Guaranteed not to crack, peel or blister for 10 years. Weatherproof in one hour.This Ronseal 10 Year Weatherproof Wood Paint has the following specification: Colour & Finish: Dark Oak GlossSize: 750ml
The Faithfull Essentials Digging Fork has a head manufactured from heat-treated (hardened) carbon steel to provide both strength and durability. The polypropylene and powder-coated finish provide improved resistance to rust, scratches, humidity and alkalis in the soil. The handle is manufactured from tubular steel with a hard-wearing polypropylene coating, making it comfortable to use. Aimed at the homeowner, where quality, frequency of use and price are key considerations. Mainly used where a large patch of open ground requires digging or turning over. The larger blade is ideal for double digging, spading up the ground, preparing beds, moving soil and other loose material. The semi-flat blade design of the spade permits it to be used as an edging tool and is tough enough for slicing through compacted soil and roots. Blades feature a treaded top to spread the load, reducing fatigue and help avoid footwear damage. Overall Length: 1000mm
Get a complete, high-quality sink waste solution with the McAlpine Sink Kit, featuring 2 basket strainer wastes. Ideal for double bowl sinks, this kit ensures smooth waste disposal without the included trap � allowing flexibility for your preferred trap configuration.
The McAlpine Z23 Blank Cap with nut is a plumbing fitting designed to seal off an unused or open pipe end. It features a BSP (British Standard Pipe) thread and comes with a nut for easy installation and removal.
The Z23 blank cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The cap is designed to provide a secure and watertight seal, preventing any leaks or water damage that could occur if a pipe end is left open.
The cap is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is compatible with other BSP threaded fittings and pipes, and its simple design makes it easy to install and remove.
Overall, the McAlpine Z23 Blank Cap with nut is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal for unused or open pipe ends. It is easy to install and compatible with a range of other fittings and pipes, making it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow.John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications.
All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications.Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Pack of 7
The McAlpine DC1BL-OS is a drain connector designed to connect 4"/110mm pipes to BS 4514. It features a 14mm offset, which allows for a more flexible and adjustable installation. The drain connector also includes an 'O' seal socket, which helps to ensure a secure and leak-proof connection.
To use the McAlpine DC1BL-OS, first ensure that the 4"/110mm pipe you are connecting to is to BS 4514 standards. Then, insert the pipe into the 'O' seal socket on the drain connector, making sure that it is securely seated. The offset design of the connector allows for some flexibility in the angle of the pipe, which can be useful in certain installation scenarios.
Overall, the McAlpine DC1BL-OS is a high-quality and reliable drain connector that can help to ensure a secure and leak-free connection between 4"/110mm pipes and BS 4514 standard drainage systems.
・ Available in Black and Grey
・ 14mm Offset
・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay
・ Ideal for low level connections
・ O' seal socket fits 4"/110mm pipe to BS 4514
The McAlpine STW85GP is a standard waste designed for use with STW 1½" shower traps. This waste features a chrome plated finish for a sleek look and is made from high-quality materials to ensure durability and longevity. The STW85GP is easy to install and comes with all necessary fittings and seals to ensure a secure and leak-free connection. It is suitable for use in both domestic and commercial applications and is compatible with most standard shower trays.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
