The Stanley Tools ControlGrip™ Wire Strippers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life. Precision milled cutting edges and pivot for smooth opening and closing of the jaws. All exposed steel surfaces have been sanded and are protected against corrosion. With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands.
The ABUS 24IB Series Diskus® Padlock is the original marine Diskus® padlock. The body, inner parts and shackle are made from stainless steel for increased protection against corrosion. With precision pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull and manipulation attacks. The cylinder has been nickle plate for enhanced corrosion resistance and is fitted with a keyway cover for maximum protection against dirt and moisture. The Original Diskus® design provides 360° protection from sawing. Diskus® 'Deep Weld Technology' offers maximum case strength. Key operated, lock retains key until locked. Ideal for use in harsh environment and marine applications, or areas of high dust and dirt content such as the back of lorries and vans. Made in Germany.This ABUS 24IB/60 Diskus® Plus Padlock is supplied with 2 keys. Specification ABUS Security Level: 7. Shackle Width: 13mm.Shackle Height: 17mm.Shackle Diameter: 8mm. Overall Width: 60mm.Overall Height: 60mm.Overall Depth: 26mm.
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 63mm x 102mm (2.5in)Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Boxed
The Monument ratchet handle to suit automatic and autocut pipe cutters. Ideal for use when space is limited it fits where hands or pliers cannot. Made from bright zinc plated stock.The Monument MON15R suit 15PC Automatic Pipe Cutter and 1715 pipe cutters.
The Faithfull Aluminium Chalk Line offers quick and effective line marking when building or decorating. With a 6:1 rewind gearing, making it 6x faster than traditional reels. It has an instant release push button, which allows the line to be pulled out rapidly, bypassing the winding mechanism. The die-cast aluminium body contains a 30m line reel, which passes through a reservoir of coloured chalk (not supplied). It becomes coated as it is reeled out. Snapping the taut line against a surface deposits the colour chalk leaving a visible but temporary line to work to. The hook has a bent tip and can be stored on the reel's side, which along with the fold away handle allows for neat and easy storage. Typical applications: plumb lines for hanging wallpaper, marking out cable lines for plumbing, marking out areas for white lining, partitions or stud wall positions, guide lines for cutting timber, roof tile positions etc.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235DIN338RNBS328ISO 235Size.1.30mm
These Knipex 28 01 Series Assembly Pliers are made from special tool steel and have PVC dipped handles for added comfort, durability and, most importantly, added grip. The oil hardened and tempered construction will give these pliers a longer working life. They ;have separately induction hardened cutting edges that are hardened to approximately 60HRc. ; These pliers are specially suitable for gripping and assembly work with a higher prehensile power. They are equipped with hardened cutting edges with serrated gripping surfaces for hard or soft wire cutting.
IRWIN Vise-Grip 40° Bent Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Grooved jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.Length: 200mm (8in)
The Faithfull Spring Dividers have polished natural steel finish legs made of flat stock. They are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 100mm (4 in)
The Purdy® Revolution™ Jumbo Mini Frame has an open design that ensures more paint is delivered onto the wall and is easier to clean with no residual paint build-up. Fitted with patented ribbed ends to ensure no sleeve roll-off and an ergonomic comfort grip handle. When used with our Jumbo Mini Sleeves, it offers versatility to a variety of surfaces: from quickly painting trim, to laying off emulsion. Its ideal when painting hard to reach areas in kitchens, bathrooms or alcoves. Suitable for both 114mm (4.1/2in) and 165mm (6.1/2in) roller sleeves. Length: 305mm (12in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 5mm (3/16in)Length: 100mm (4in)
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 25mm Bag Weight 500g
The Faithfull Brick Lifter allows single handed lifting of bricks and blocks by cantilever action. Adjustable length to suit task in hand. The robust construction gives a long life and is electro plated to resist rust. Lifting capacity: 400 to 670mm (16 to 26in).
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 17mm.
The Wiha Professional electric Combination Pliers come with an extra long cutting edge. Provides a secure, non-slip grip in all standard work situations. A DynamicJoint reduces the effort required for cutting. The cutting head has a high-quality, chrome-plated surface to prevent corrosion.Ergonomically shaped plier handles ensures comfortable, fatigue-proof work. Offers you full protection, each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Manufactured according to IEC 60900 and DIN ISO 5749. Specifications: Overall Length: 180mm.Cutting Capacity (mm): Medium-hard: 3.4, Hard: 2.2, Hardened Spring Steel: 1.8mm.
The Wiha SoftFinish electric slimFix Pozidriv Screwdrivers comes with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.The patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900.1 x Wiha SoftFinish electric slimFix Screwdriver Pozidriv PZ1 x 80mm.
The 21 Piece Wiha Insulated 1/2in Ratchet Wrench Set is for safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. Nut driver and extensions are mechanically locked, the change is initiated by pressing the activation button once.Each tool in the set is subject to an individual piece testing, as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Organized and neatly stored in a practical and sturdy case. Contains the following: 1 x 1/2in Insulated Ratchet Wrench with integrated switching lever allows effortless switching between right and left rotation. 1 x 1/2in Insulated T-handle. 2 x 1/2in Insulated Extensions: 125 & 250mm. 11 x 55mm 1/2in Insulated Nut Driver Inserts: 10.0, 11.0, 12.0, 13.0, 14.0, 17.0, 19.0, 22.0, 24.0, 27.0 & 32.0mm. 5 x 120mm 1/2in Insulated Nut Driver Inserts: 4.0, 5.0, 6.0, 8.0 & 10.0mm.
The Wiha Electrician's Spirit Level is built for measuring and marking vertical and horizontal distances between flush boxes. End-to-end casing allows electricians to mark out lines without needing to stop. The ingeniously positioned linear scales ensure users can measure in comfort, even when viewing from above. Both level bubbles can be seen easily, even from an acute angle.Sliding marking points for boxes allow the spirit level to be adjusted to the marking distances required by local regulations. The variable distance marks for up to four flush socket boxes bring another advantage to electrical installation work. This means the level can be used in a wide variety of situations, even on an international level.Thanks to its compact dimensions, it is also perfect for portable use and can be easily stored away. Specification: Length: 40cm.
Faithfull Magnetic Impact Nut Driver is specifically designed and for use in high torque impact drivers. The magnetic hex socket is ideal for repetitive jobs requiring the setting and removal of bolts and nuts. Manufactured from unique high-grade steel specially engineered for extreme durability and increased working life.1 x Faithfull Magnetic Impact Nut Driver 10mm x 1/4in Hex.
The DEWALT DCF504 XR 1/4in Open Head Ratchet has a brushless motor that delivers up to 95Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 95NmLength: 345mmThe DEWALT DCF504D1 XR 1/4in Open Head Ratchet is supplied: 1 x 12V 2.0Ah Li-ion Battery1 x DCB112 Charger1 x Soft Tool Bag
Everbuild Flue Jointing Compound is a finely dispersed, asbestos free material with a stiff consistency. It will not harden completely and small movements can be accommodated without cracking. Flue Jointing Compound is non-flammable and, therefore, there is no risk of fire.Size: 500g
The Wiha Voltage and Continuity Tester is made for standardised voltage testing, continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection.The LED display ensures easy to read measurement results. An additional signal sound indicates the current flow during the continuity check. A check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load.It also has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for people working on building installation and directly on the sources of low-voltage installations. Complaint with the standards IEC 61243-3:2014, IP64, CE CAT II 1.000V / CAT IV 600V. Specifications: Voltage V AC (min. – max.): 12-1,000V.Voltage V DC (min. – max.): 12-1,500V.Single-pole Phase Test: 100 - 700 V AC.Protection Class: IP 64.Operating Temperature: -15 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 12mm
These Rawlplug Rawlbolt® Loose Bolts have the following specification: Size x Max. Fixture Thickness: M10 x 25mmOverall Length: 90mmDrill Ø: 11mmPack Quantity: Bag of 5
The Starrett SDS Plus 2 Point Drill Bit is made with high performance carbide tips and a two channel design featuring a unique chip removal/breakage accelerator. This delivers fast material penetration and maximum debris removal. The drill body offers superior strength thanks to its specialised heat treatment, enabling it to withstand the most demanding of applications.This Starrett SDS Plus 2 Point Drill Bit has the following specifications: Diameter: 12mm.Overall Length: 160mm.Working Length: 100mm.
The Olympia Tools® Heat Gun has a powerful motor and 3 heat/airflow settings, controlled by an easy-to-use switch. For added safety, there is a built-in overheat feature that prevents the tool from overheating. Fitted with a comfortable soft grip. The end of the heat gun doubles as a sturdy stand, ideal when the nozzle is hot after use. Supplied with: 4 x Nozzles and 1 x Scraper. Specification: Input Power: 2,000WHeat Settings: 50/400/600°CAir Flow: 500/250/500 L/min.Weight: 0.80kg
The Starrett SDS Plus 2 Point Drill Bit is made with high performance carbide tips and a two channel design featuring a unique chip removal/breakage accelerator. This delivers fast material penetration and maximum debris removal. The drill body offers superior strength thanks to its specialised heat treatment, enabling it to withstand the most demanding of applications.This Starrett SDS Plus 2 Point Drill Bit has the following specifications: Diameter: 6.5mm.Overall Length: 160mm.Working Length: 100mm.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 14mm
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grade steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 230mm.
Briwax Wax Polish is a blend of beeswax and carnauba wax suitable for applying to bare wood or over Sanding Sealer. A natural wax wood finishing treatment, it gives an instant, long-lasting sheen that is suitable for all types of wood. Ideal for wood carvings and turned wood, for floors and skirtings. This wax polish also cleans and protects tiles, metalwork, marble and melamine etc. Easy to apply and buff, and it dries quickly. Application: Apply with 0000 steel wool, Briwax brushes or cloth. Can be applied directly to timber or onto Briwax Shellac Sanding Sealer. Available in clear, which maintains the natural colour of the wood, and various wood shades to stain and wax in one operation.1 x Briwax Wax Polish Original Slate Grey 400g
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS10160 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 10mmWorking Length: 100mmOverall Length: 160mm
