DEWALT DCLE34031 Multi Line Laser with 3 x 360 degree laser lines to aid in full room layout. Its green beam diode ensures better beam visibility on the job site, even in brighter conditions. Over moulded housing protects the tool from harsh job site conditions. Fitted with a pendulum lock that helps prevent damage to internal components during transportation. It comes with a pivotable bracket, integrated magnets allow for safe sticking to metal studs. There is also a tripod attachment with mounting thread (1/4in & 5/8in), making this level the perfect all rounder for several applications. Specification: Laser Class: 2, Level Accuracy: ±0.3mm/mSelf-Levelling Range: 4 degreeVisibility: 40m (100m with Detector)Thread: 1/4in & 5/8in (integrated in Bracket)IP Rating: IP54Drop Test: 1mThe DEWALT DCLE34031D1 3 x 360 degree Multi Line Laser is supplied with: 1 x 18V 2.0Ah Li-ion Battery1 x Charger1 x Target Card1 x Bracket1 x Carry Case
The DEWALT DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. It has an extremely durable tool design, including a cast magnesium base, which allows repetitive, accurate cuts. With an ergonomic handle set with rubber overmold, the saw provides optimum comfort to the user. Is an efficient cordless solution in trimming wood panels and chipboards. DCS391M2: 2 x 18V 4.0Ah XR Li-ion Slide On Battery Packs.DCS391N: Bare Unit, No Battery or Charger Supplied. A 165mm Carbide Blade, Hex Key and Dust Port are supplied as standard. Specfication No Load Speed: 5,150/min.Max. Cutting Depth: @90°: 55mm, @45°: 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kgDEWALT DCS391M2 165mm XR Premium Circular Saw 18 Volt Supplied with 2 x 18 Volt 4.0Ah XR Li-ion Slide On Battery Packs, 1 x Multi-Voltage DCB105 XR Universal Charger, 1 x 165mm Carbide Blade, 1 x Hex Key and 1 x Dust Port.
The DEWALT DCS389N XR FlexVolt Reciprocating Saw is supplied as a Bare Unit - No Battery or Charger supplied. The DEWALT DCS389 XR FlexVolt Reciprocating Saw provides up to 19% more power than the earlier model (DCS388). Equipped with a brushless motor for increased power, extended run time, reliability and durability. An intelligent variable speed trigger and lock-off switch provide quick controlled cuts and enhanced work safety. Its pivoting shoe has an open top for high stability and visibility during cutting. Its ergonomic handle is fitted with a rubber overmould to provide ultimate comfort. The two-position blade clamp allows for flush cutting and increased visibility. Whilst the lever-action keyless blade clamp allows tool-free blade change. There is also an LED for improved visibility of the cut-line. Specification: Strokes at No Load: 0-3,000/min.Stroke Length: 29mmMax. Cutting Capacity: PVC 160mmWeight: 3.54kg
The DEWALT DWS777 216mm XPS Crosscut Mitre Saw has been fully upgraded from the previous model. It includes XPS Shadow Line cut technology for accurate alignment and a DEWALT Airlock compatible dust port. It has a traditional pull and tilt design. The fence and base have been re-engineered to new standards making this saw more accurate and heavy-duty. There's a new head lock feature which enables users to fix the head of the saw and therefore restrict the traverse, perfect for trimming and groove cutting. With 5 pre-set mitre stops at 0°/15°/22.5°/30°/45°, as well as fixed left and right hand fences with measurements on them. Supplied with 24 tooth TCT blade. Specifications: Input Power: 1,800WNo Load Speed: 6,300/min.Blade: 216 x 30mm BoreCapacity: Max. Depth: 62mm, Max. Cross Cut: 270mmMitre Cut (Right/Left): 50°/-50°Bevel Capacity: 48°Weight: 14kgDEWALT DWS777 216mm XPS Crosscut Mitre Saw 110 Volt Version
The DEWALT DCE088 Self-Levelling Cross Line Green Beam Laser is a multi-voltage XR power tool, compatible with both 12V and 18V Li-ion batteries. A green beam laser diode provides full brightness for visibility and extended working range. It has a variable blink sequence for manual mode and full-time pulse mode allows use with a detector. Fitted with a fine adjustment knob for precision and accuracy. There is also a locking pendulum to help prevent damage to internal components. Specification: Working Range: 30m (50m with detector)Accuracy: ± 3mm @ 10mLaser Class: 2Thread: 1/4in and 5/8inThe DEWALT DCE088D1G18 Cross Line Green Beam Laser is supplied with: 1 x 18V 2.0Ah Li-ion Battery1 x Charger1 x Laser Target1 x Wall Mount Bracket1 x TSTAK Compatible Box
The DEWALT DCS777 FlexVolt XR Cordless Mitre Saw is fitted with an XPS shadow line cut indicator that provides fast, accurate alignment of the blade whilst illuminating the work piece for increased productivity, with no adjustment required. The base and fence has been machined to meet the accuracy requirements of the most demanding applications. With a head lock function that allows the head to be fixed, restricting the traverse function for trim applications and ease of transport. Intergrated positive mitre stops at 15°, 22.5°, 30° and 45° with a quick release mitre mechanism up to 50°. Sliding left-hand fence with measuring scale for improved material support and a compact internal rail design for a large cutting capacity whilst remaining transportable. DCS777T2: 2 x 18/54V 6.0/2.0Ah XR Li-ion BatteriesDCS777N: Bare Unit, No Battery or Charger Specification No Load Speed: 6,300/min.Blade: 216 x 30mm BoreCapacity (mm): 90°/90°: 270x62, 90°/45°: 270x48, 45°/90°: 190x62, 45°/45°: 190x48Max. Depth of Cut: 80mmMitre Cut (Right/Left): 50°/50°Bevel Capacity: 48°Weight: 14kgThe DEWALT DCS777N FlexVolt XR Cordless Mitre Saw is supplied as a Bare Unit, NO battery or charger supplied.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
This Kent & Stowe Border Spade has a robust, solid forged carbon steel blade, which offers strength and durability. Comes with a 10-Year Guarantee. A traditionally styled, Kent & Stowe Border Spade with an extended shank for improved strength, as well as having a larger tread edge for added comfort. Its handle is made from beautiful FSC® approved ash wood that has been split to form a traditional YD handle. An essential tool, ideal for borders and beds, and used for cultivation, soil turning and improving drainage. Specification: Blade Thickness: 2.5mmLength: 104cm
The DEWALT Titanium S3 Safety Boots have a waterproof and breathable Samsung membrane inner lining and PU comfort insoles for dry, comfortable all day wear. The padded tongue and collar provide increased comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. Available in Wheat with a Full Grain Nubuck Leather Upper or Tan with a Full Grain Tan Leather Upper. Conform to CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.These DEWALT Titanium S3 Safety Boots have the following specification: Colour: Tan.Upper: Full Grain Leather.Size: UK 9 Euro 43.
Gardman PVC Coated Wire has a wide variety of uses around the garden. Made from PVC coated steel wire for long life.
This Light Duty Wire is ideal for general purpose including tying, fixing, training and supporting. Support plants or tie fencing back to posts.Size: 1.2mm Ø x 50m (L).
ISOPON P.38 Multi Purpose Body Filler is a durable and easy to use filler which has been specifically formulated to repair minor dents and scratches in most types of metal bodywork. It is simple to mix, dries quickly and easily sands smooth, ready to prime.U-Pol P38 Easy Sanding Body Filler 2.25 Litre Tin.
The Flopro + Triple Fit Outside Tap Connector is used for connecting the outside tap with a hose, it has three inserts to suit all outside taps. Ultra-tough and made using superior ABS plastics. The connectors allow a ‘Snap Fit’ and ensure easy connection to all major watering brands.
This Kent & Stowe Digging Fork has robust, solid forged carbon steel head/tines, for added strength and durability. Comes with a 10-Year Guarantee. A traditionally styled, Kent & Stowe Digging Fork with an extended shank for improved strength. Its handle is made from beautiful FSC® approved ash wood that has been split to form a traditional YD handle. An essential tool, ideal for use on large soil areas, for cultivation, soil turning, aerating and breaking up soil. Specification: Length: 110cm
The BlueSpot 9-in-1 Precision Screwdriver Set is manufactured from chrome vanadium steel for increased durability. Features internal bit storage for quick and convenient access. Compact pen design with pocket clip makes it easy to carry around. Includes Slotted, Phillips and TORX screwdriver bits. Sizes: Slotted: 1, 1.5 and 2mmPhillips : PH00, PH0 and PH1TORX: TX6, TX7 and TX8
This Blue Spot socket set contains 11 useful 1/4 inch square drive sockets which are made from chrome vanadium steel and which have a deep reach for better access. The set contains the following sizes:4, 4.5, 5, 6, 7, 8 ,9, 10, 11, 12 and 13mm. Supplied with a storage rack.
The BlueSpot Tools White Rubber Mallet with wooden handle. Its high quality rubber head is ideal for applications where a metal head would be unsuitable. The rubber head ensures minimal rebound after blows. Ideal for trade and diy users.
This BlueSpot Tools Steel Wire Cup Brush has the following specification: Wire: 0.3mm.Diameter: 65mm (2 1/2in) / M14 x 2 Fitting.Max. Safe Speed: 12500 RPM.
The BlueSpot Tools 1/2in, 3/8in & 1/4in Metric Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. Supplied in a sturdy plastic case with metal clips for quick and convenient storage. Contains: 10 x 1/4in Hex Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13mm.10 x 1/4in Hex SAE Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2in.4 x 1/4in Deep Wall Sockets: 8, 9, 10 and 11mm. 1 x 1/4in Extension Bar 2in.1 x 1/4in Universal Joint.1 x 1/4in Coupler.1 x 1/4in Spinner Handle.1 x 1/4in Quick Release Ratchet Handle. 7 x 25mm TORX Bits: T10, T15, T20, T25, T27, T30 and T40. 11 x 3/8in Hex Metric Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.9 x 3/8in Hex SAE Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8in.4 x 3/8in Deep Wall Sockets: 13, 14, 15 and 17mm.8 x 3/8in E-Sockets: E8, E10, E11, E12, E14, E16, E18 and E20.2 x 3/8inSpark Plug Sockets: 16 and 21mm. 2 x 3/8in Extention Bars: 3in and 6in.1 x 3/8in Universal Joint.1 x 3/8in Quick Release Ratchet Handle (72 Tooth). 2 x 3/8in Philips Bit Sockets: PH1 and PH2.2 x 3/8in Pozi Bit Sockets: PZ1 and PZ2.7 x 3/8in TORX Bit Sockets: T20, T30, T40, T45, T50, T55 and T60.4 x 3/8in Hex Bit Sockets: H3, H4, H5 and H6.2 x 3/8in SlottedBit Sockets:5.5 and 6.5mm. 7 x 1/2in Hex Metric Sockets: 20, 21, 22, 24, 27, 30 and 32mm.4 x 1/2in Hex SAE Sockets: 15/16, 1, 1-1/16 and 1-1/4in.4 x 1/2in Impact Sockets: 17, 19, 21 and 23mm. 2 x 1/2in Extension Bars: 5in and 10in.1 x 1/2in Universal Joint.1 x 1/2in Quick Release Ratchet Handle (72 Tooth). 10 x Combination Spanners: 8, 9, 10, 11, 12, 13, 14, 17, 18 and 19mm.
The BlueSpot Double End Ratchet Spanner is manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools Double End Ratchet Spanner (17-19mm).
The Knipex CoBolt® compact bolt cutters give an exceptional cutting performance with minimum effort because of their effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than the hand force applied (Requires 60% less effort). Cuts components like bolts, nails, rivets, etc. up to 6mm dia. The recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings. Cutting Capacity (mm): Piano: 3.6, Hard: 4.0, Soft: 6.0.
The Starrett HSS Split Point Drill Bits have superior body strength thanks to a specialised heat treatment, they can withstand the most demanding of applications. The high-performance ecision ground carbide tips deliver consistent performance. Whilst the flute geometry provides fast material penetration and maximum debris removal.They also feature a unique chip removal/breakage accelerator.Designed to meet the requirements of professional users. Manufactured to DIN 338 Standards.
This Starrett HSS Split Point Drill Bit has the following specifications:Tip Diameter: 6.0mmWorking Length: 57mmOverall Length: 93mm
These Stanley Huntsville Grey Holster Trousers are made from hard-wearing Poly Cotton. They have multiple cargo and holster pockets making them good, all-round, functional work trousers. There are also 2 rear pockets and top loading knee pad pockets allow you to add knee pads, increasing comfort when working on your knees.Waist: 34inLeg: 31in
A Victorinox Swiss Army Knife is a combination of solid hand tool and inventive creativity. A characteristic feature of the Victorinox Swiss Army Knife is its multi-functionality, which makes it indispensable for many of life's situations. All Victorinox Swiss Army Knives are made from first class stainless steel and are guaranteed against any defects in material and workmanship. The Huntsman Swiss Army Knife has large and small blades, a corkscrew, a can opener with a small 3 mm screwdriver, a bottle opener with a 6 mm screwdriver and wire stripper, a reamer/punch tool, a keyring, tweezers, a toothpick, scissors, a multi-purpose hook and a woodsaw. Size: 91mm (3.1/2in) long.Huntsman Swiss Army Knife. Colour: Red.Size: 91mm (3.1/2in) long.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 5.0mm.
H/Dryer 1.8kw Auto H/Duty Chrome
_Durable polycarbonate housing for 1016
_Self re-setting overheat thermostat
_For use in public washrooms, factories, sports establishments, schools and colleges etc
_Durable, vandal resistant casing with tamper proof fixings included
_Standby / Power-On LED indicator
1 x ITL Insulated 3/8in Drive Extension 125mm (5in). The ITL Insulated 3/8in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 125mm (5in)
Plasson BSP threaded sockets are made from Polypropylene which unlike gunmetal and bronze will not corrode. Rated to 16 bar these fittings provide a reliable connection to imperial pipework. Made from Polyproplene so will not corrode. BSP Threaded. Fast and simple to install. Rated 16 bar. 0. 0. 0
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The John Guest Speedfit Tap Connector 3/8" x 3/4" is designed for easy installation and reliable performance in plumbing applications. This connector is perfect for connecting taps and hoses with a secure fit.
Easy Installation: Quick push-fit design for hassle-free setup.
Durable Material: Made from high-quality materials for long-lasting use.
Versatile Use: Suitable for various plumbing applications.
Secure Connection: Ensures a tight fit to prevent leaks.
Compact Size: Ideal for tight spaces and easy handling.
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Features and benefits
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systemsPack of 100
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systemsPack of 150
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Helps make the pipe more rigid when a side load is applied
Suitable for hot and cold water and central heating systems
