The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 20.0mm.Total length: 210mm.Working length: 150mm.
1 X M373 Splitproof Bevel Edge Wood Chisel 25mm (1in). The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Irwin magnetic bit holders are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener. Size: 1/4 in x 50mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 10.0mm.Total length: 160mm.Working length: 100mm.
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 7mm
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.Polycell Trade Decorator's Caulk 380ml
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.Polycell Trade Decorator's Caulk 380ml
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Blue.Size: 750ml.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Yellow.Size: 5 Litre.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Yellow.Size: 2.5 Litre.
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.Polycell Trade Decorator's Caulk 380ml
This Fisco UM3ME Uni-Matic II Pocket Tape has metric and imperial graduations. Blade Length: 3m/10ftBlade Width: 16mmAccuracy: EC Class II The Hultafors Uni-Matic II Pocket Tape has a compact design that fits comfortably into the palm of your hand. The smooth, rounded ABS case is ultrasonically welded for added strength and features a positive action, side lock brake that is easy-to-use. With a 16mm wide, hard-wearing polyester-coated, carbon steel blade. It also features a belt clip and a self-zeroing end-hook. Made in Britain.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/60 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 33mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 60mm.Overall Height: 97mm.Overall Depth: 19mm.
The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (Square, Protractor and Centre) that can be attached to the stainless steel ruler, allowing versatile measurements and marking on various types of workpieces. The stainless steel rule has engraved graduations; one side metric, one side imperial and hardened and ground slide ways. Range: 180°.Length: 300mm (12in).
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 3316R Firm Joint Outside Calipers have the following specification: Size: 150mm (6in).
This Moore and Wright Dial Caliper has the following specifications: Range: 0-150mm. Accuracy: ± 0.02mm. Resolution: 0.02mm. TheMoore Wright Dial Calipermakes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel. 150mm
The Moore & Wright 420 Series Dial Test Indicators have highly precisioned, fully jewelled bearings and carbide points. There are two dovetail clamps on these models. The 420 Series allow automatic reversal of measuring direction and there is a rotating dial for increased ease of use. Styli Length: 12mm (1/2in).The Moore & Wright MW420-03 Dial Test Indicators has the following specification: Range: 0.8mm.Resoultion: 0.01mm.Dial Reading: 0-40-0.Dial Diameter: 25mm.
The Moore & Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. There is a powerful magnetic base that can be turned on and off depending on the user requirements and there is a magnetic force of 80kg/175lbs.
The Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life.Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Specification: Cutting Depth: 41mm.1 x Starrett Fastcut Bi-Metal Holesaw 40mm
Upgrade your radiator performance using the durable Pro Classic Radiator Valve Extension 40mm combines style with functionality for a neat finish. A high-quality motorised valve designed to boost durability and control in your heating system. Ideal for DIY installations, it ensures reliable mid-position flow management.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 6.50mm.Working length: 63mm.Overall length: 101mm.
The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.
The Knipex Pliers Wrench XL acts as pliers and a wrench in a single tool. This unique installation tool is suitable for opening widths up to 85mm (3.3/8in). It acts as an adjustable tightening tool and is ideal for large screw joints, with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. It is also excellent for gripping, holding, pressing and bending workpieces. It has smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. The zero backlash jaw pressure prevents damage to edges of sensitive components. The tool allows adjustment at the touch of a button directly on the workpiece, The parallel jaws give a more solid grip. The construction gives infinite adjustment of all widths up to the specified maximum size. The pliers wrench ensures reliable catching of the hinge bolt with no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. It has a lever transmission greater than 10:1 for strong gripping power. The pliers wrench is made from chrome vanadium electric steel, which is forged and oil-hardened. It conforms to DIN ISO 5743. Open-end wrenches with fixed opening widths are expensive, especially when used for large union joints. The KNIPEX Pliers Wrench XL, with its adjustable jaw offers enormous savings potential. Specifications: Capacity: 85mm (3.3/8in).Length: 400mm.Adjustment positions: 25.
The Knipex 95 61 190 wire rope shears are ideal for medium-hard wire cables up to 7mm diameter without splaying, including those that are extremely strong, such as for example tyre cord. They also have two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables and the blades are hardened to approximately 64HRC for added strength and durability Cutting head on the 95 61 190 are forged with polished head and handles plastic coated for added grip and a comfortable grip. Specification Length: 190mm (7.1/2in).Cutting Capacities: Multi-Stranded Cable: 7.0mm, Wire Rope: 5.0mm, Medium Hard Wire: 4.0mm & Piano Wire: 2.5mm.This Knipex ;Wire Rope/Bowden Cable Cutter is fitted with PVC handles.
The Knipex 77 12 Electronic diagonal cutter are a top quality precision cutters for ultra fine cutting work in electronics and fine mechanics. Has around head, bevelled with wire clamp and round head, NON-bevelled. They have precision shaped tips which are ideal for cutting close sitting wire, soft wire up to 1.6mm to hard wire up to 0.5mm diameter. These Knipex electronic cutters are jointed with a stainless steel rivet for added strength and easy movement and have cutting edges additionally induction hardened for durability and a longer life. These pliers have an extremely smooth play-free joint with stainless steel rivet movement for minimum operator fatigue. The handles are coated with soft plastic for comfort and a return spring built into the handle. This model has a precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. These pliers are made from special tool steel which is oil hardened for added strength and durability. With polished heads. Length 115mm.Cutting Capacity: Hard: 0.6mm, Medium: 1.2mm, Soft: 0.2-1.6mm.
Knipex VDE StepCut XL Cable Shears have a large cutting capacity and provide noticeably easier cutting than compact cable shears. The cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC. With dual cutting areas: the stepped cutting edge holds small and larger cables close to the joint during the cut; the front cutting edge cuts very large cables step by step. They offer easy one or two-handed operation with minimum handle opening for large cable diameters. The adjustable, high-leverage bolted joint provides precise and smooth cutting. Fitted with VDE multi-component grip. VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A pinch guard prevents operators' fingers being pinched. NOT suitable for steel-reinforced cables, e.g. ACSR. Specifications: Cutting Capacity: Solid Copper or Aluminium Cables: 35mm², Stranded Cables: 70mm²and Fine Stranded Cables: 120mm². Overall Length: 225mm.
The Knipex Zinc Plated High Leverage Concreter's Nippers offer substantially higher cutting performance as well as a damping of the cutting stroke after cutting the binding wire, two valuable ergonomic advantages for the user. They can twist and cut wire in one operation, making them fast, reliable and economical.Made from special tool steel oil-hardened and tempered. An extra-slim form makes them ideal for tying submerged positioned steel rods. They provide a particularly high cutting capacity with minimum effort due to their optimum transmission ratio. High damping of the cutting stroke after cutting the binding wire reduces strain on tendons and muscles.These Knipex High Leverage Concreter's Nippers are supplied loose, WITHOUT packaging. Specification: Overall Length: 300mm (12in)Wire Cutting Capacities: Hard: 2.0mm, Medium: 3.8mmHead Width: 25mmWeight: 499g
The Knipex 11 01 160 end wire strippers are made from a good quality special tool steel and are oil hardened for a longer usage life, with better durability than some cutters in its class. The wire strippers feature an adjustable screw for setting the desired diameter of wire to be stripped. This can be any wire diameters up to a maximum of 5mm or 10mm2 cable cross section. Size: 160 mm.Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1102160 are made from special tool steel for strength and durability, this oil hardened wire stripper features a adjustable screw for setting the desired diameter. it cuts wire diameters up to a maximum of 5 mm or 10mm² cable cross section. Comfort Grip Size: 160 mm.
Knipex 67 01 Series High Leverage End Cutting Nippers have cutting edges suitable for soft, hard and piano wire. High cutting capacity with little required effort due to optimum co-ordination of cutting edge angle and transmission ratio. Made from forged heavy-duty chrome vanadium steel that has been oil-hardened, multiple times. Black atramentized finish with a polished head. The cutting edges have been additionally induction hardened, approx. 64 HRC. Fitted with plastic coated handles for increased comfort. Cutting Capacity Ø:67 01 140: Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm67 01 160: Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm67 01 200: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mmThis Knipex High Leverage End Cutting Nippers have the following specification: Length: 200mmCutting Capacity Ø: Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 130mmShaft size 3-10mm
The Knipex 70 01 series of diagonal cutters are constructed from chrome vanadium solid style forged top quality steel with precision non slip tips for added strength and durability. They combine high quality material and precise workmanship for long service life. The induction-hardened precision cutting edges offer clean cutting at the cutting edge tips. These pliers are suitable for cutting thin copper wires. The narrow head style is ideal for use in confined areas. Like most of the Knipex range of pliers all components of these cutters have oil hardened edges and they are made from Vanadium electric steel forged to approximately 62 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have polished head and plastic PVC dipped coated cushion grip handles for added durability and comfort. Knipex 70 01 series of diagonal cutters are ideal for all trade or DIY applications and especially for the electrical trade. These Knipex diagonal cutters come in 125, 140, 160, and 180mm versions for all types of work applications. High quality material and precise workmanship for long service life.Length 125mm (5 in)
