The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/35 TITALIUM™ Padlock is supplied carded and has the following specification: ABUS Security Level: 4.Keyed Alike Key Reference: KA6355. Shackle Width: 19mm.Shackle Height: 20mm.Shackle Diameter: 5.5mm. Overall Width: 35mm.Overall Height: 54mm.Overall Depth: 14mm.
The Marshalltown 20D Hand Sander is lightweight and is fitted with an exclusive one-piece handle clamp that holds paper firmly and makes changing paper easy. It has a bonded foam pad and DuraSoft® handle, and is designed for pre-cut or half sheet standard sandpaper.
The McAlpine Black Plastic Captive Plug BP1-Cap is a plumbing component used to cap off a 1 1/2" diameter pipe. It is made of black plastic and is designed to be easily installed and removed, making it a convenient solution for plumbing maintenance and repair.
The term "captive plug" refers to the fact that the plug is designed to remain attached to the pipe even when it is removed. This helps prevent the plug from getting lost or misplaced, and makes it easier to reinsert the plug when needed.
Overall, the McAlpine Black Plastic Captive Plug BP1-Cap is a simple yet effective plumbing component that is commonly used in residential and commercial plumbing systems.
・ Available in 1½"and 1¾"
・ Only for use with McAlpine wastes which have a centre pin fixing
・ Manufactured in black polypropylene
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 7.5Adjustment . 158 - 190mmAdjustment. 6.1/4 - 7.1/2in
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Discover the Arctic Hayes PH Encapsulated Smoke Pellets, your key to precise and efficient smoke testing. Each compact tube contains ten 5-gram smoke pellets, enclosed in protective capsules for your convenience. These encapsulated pellets produce a consistent, highly visible smoke stream, making the detection of air leaks, drafts, and airflow problems effortless. Ideal for a wide range of applications, from HVAC system assessments to plumbing and electrical fault detection, these versatile pellets simplify your diagnostics. With a quick ignition, these smoke pellets start producing the smoke you need instantly. Whether you're a seasoned professional or a dedicated DIY enthusiast, rely on Arctic Hayes for dependable precision in your testing projects. Order your Tube of 10 Encapsulated Smoke Pellets today and elevate your troubleshooting capabilities to a new level.
The Unifix Grade 10.9 High Tensile Hexagon Setscrews DIN 933 Bright Zinc Plated - M20 x 40 are designed for high-strength applications, ensuring durability and reliability in various fastening tasks.
High Tensile Strength: Grade 10.9 ensures superior strength for demanding applications.
Corrosion Resistant: Bright Zinc Plated finish provides protection against rust and corrosion.
Versatile Use: Ideal for construction, automotive, and machinery applications.
Easy Installation: Hexagon head design allows for easy tightening with standard tools.
Precision Engineering: Manufactured to DIN 933 standards for consistent quality.
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length 9.1/2in.Cutter width 1.3/4in. - 45mm
The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 16mm.Box quantity: 200.
The DEWALT DXVA19-2500 Durable Hose is crush-resistant and flexible. Easily bends to clean any area with ease.Specifications:Diameter: 48mm.Length: 2.1m.
The DEWALT DXVA19-2601 Superflex Hose is manufactured from heavy-duty crush-resistant rubber. Extendable hose length for a wide range of cleaning applications. Compatible with 48mm (1.7/8in) vacuum hoses.Specifications:Diameter: 48mm.Extended Length: 6.1m.
The Faithfull Button Magnets are made from alnico to provide a high resistance to corrosion and operate in high temperatures up to 500°C. The north and south poles are on the same face and separated by a slot. All sizes have holes for mounting the magnet, but they must not be recessed into ferrous metals, as it will short circuit the magnetism. Suitable to be used as work holding devices for welding, sign making and other applications, or for reed switch operation.Diameter: 19.0mmHeight: 12.7mmPull Power: 1.8kg
The Faithfull Button hook-on Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and have a BSP thread. Supplied in packs of 5.Thread: 1/8in BSP
The Faithfull Button hook-on Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and have a BSP thread. Supplied in packs of 5.Thread: 1/4in BSP
Discover the reliability of JCP Fixings General Purpose Metalfix Self-Drilling Screws. Designed for various applications, these screws ensure a secure fit and easy installation.
Self-Drilling Design: Eliminates the need for pre-drilling, saving time and effort.
Durable Construction: Made from high-quality materials for long-lasting performance.
Versatile Use: Ideal for cladding, roofing, and general construction projects.
Easy Installation: Designed for quick and straightforward application.
Corrosion Resistant: Bright Zinc Plated finish provides added protection against rust and wear.
Quantity: Box of 200 screws.
The Unifix Grade 10.9 High Tensile Hexagon Setscrews DIN 933 Bright Zinc Plated - M16 x 35 are designed for high-strength applications, ensuring durability and reliability in various fastening tasks.
High Tensile Strength: Grade 10.9 ensures superior strength for demanding applications.
Corrosion Resistant: Bright Zinc Plated finish provides protection against rust and corrosion.
Versatile Use: Ideal for construction, automotive, and machinery applications.
Easy Installation: Hexagon head design allows for easy tightening with standard tools.
Reliable Performance: Engineered to meet DIN 933 standards for quality assurance.
The JCP Fixings Metalfix High Thread Self-Drilling Screws are designed for efficient fastening in light section applications. With a size of 5.5 x 100mm, these screws feature a high thread design for superior grip and stability.
High Thread Design: Ensures a secure hold in light materials.
Self-Drilling: Eliminates the need for pre-drilling, saving time and effort.
Durable Coating: Bright Zinc Plated finish provides corrosion resistance for longevity.
Versatile Use: Ideal for various light section applications.
Easy Installation: Designed for quick and efficient fastening.
The Unifix Self-Tapping Screws are designed for easy installation in wood and metal applications. With a Pozi pan head and a durable Bright Zinc Plated finish, these screws provide excellent grip and corrosion resistance.
Self-Tapping Design: Eliminates the need for pre-drilling, saving time and effort.
Pozi Pan Head: Ensures a secure fit and easy driving with a screwdriver.
Durable Bright Zinc Plated Finish: Offers enhanced corrosion resistance for longevity.
Versatile Size: 14G x 1" (6.3 x 25mm) suitable for various projects.
Compliant with DIN 7981-C-Z Standards: Guarantees quality and reliability.
The McAlpine 1 1/2" x 1 1/4" Surefit Swept Tee V21L is a plumbing fitting designed for use in domestic and commercial drainage systems. The tee fitting is made of durable materials and is designed to provide a secure, leak-proof connection between pipes.
The "Surefit" feature of the tee fitting refers to McAlpine's patented design which allows for easy and secure connection of pipes. The tee fitting has a swept design which helps to prevent blockages and improve the flow of waste water through the drainage system.
The V21L model is specifically designed for use with 1 1/2" and 1 1/4" diameter pipes. The tee fitting can be used to create a T-junction in a drainage system, allowing for the connection of multiple pipes. The tee fitting is suitable for use with a range of materials including PVC, ABS, and copper pipes.
The McAlpine 1 1/2" x 1 1/4" Surefit Swept Tee V21L is a reliable and durable plumbing fitting that is ideal for use in a range of drainage systems. The tee fitting's patented design and swept features help to improve the flow of waste water, while the Surefit connection ensures a secure and leak-proof connection between pipes.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" X 1 1/2" X 3/4" Surefit Swept Tee With 19Mm Pushfit Branch (V23L) is a plumbing fitting used for connecting pipes of different sizes and configurations. The tee is made of durable materials and features a swept design that reduces the likelihood of blockages and promotes efficient flow through the plumbing system.
The tee has a 1 1/2" inlet and two outlets, one with a 1 1/2" diameter and the other with a 3/4" diameter. The 3/4" outlet features a pushfit branch that can be connected to a 19mm pipe without the need for additional tools or fittings. The Surefit design of the tee ensures a secure and leak-free connection with compatible pipes and fittings.
Overall, the McAlpine V23L Surefit Swept Tee is a reliable and efficient plumbing component that can be used in a variety of applications, including in domestic and commercial plumbing systems.
・ Available in 2 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" Surefit Swept Tee V1L is a plumbing fitting designed for use in domestic and commercial drainage systems. The tee fitting is made of durable materials and is designed to provide a secure, leak-proof connection between pipes.
The "Surefit" feature of the tee fitting refers to McAlpine's patented design which allows for easy and secure connection of pipes. The tee fitting has a swept design which helps to prevent blockages and improve the flow of waste water through the drainage system.
The V1L model is specifically designed for use with 1 1/2" diameter pipes. The tee fitting can be used to create a T-junction in a drainage system, allowing for the connection of multiple pipes. The tee fitting is suitable for use with a range of materials including PVC, ABS, and copper pipes.
The McAlpine 1 1/2" Surefit Swept Tee V1L is a reliable and durable plumbing fitting that is ideal for use in a range of drainage systems. The tee fitting's patented design and swept features help to improve the flow of waste water, while the Surefit connection ensures a secure and leak-proof connection between pipes.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine WF1 Wasteflow with FJ10 Trap is a plumbing fitting designed for use with kitchen sinks. The WF1 Wasteflow is a standard waste outlet that connects to the sink, while the FJ10 Trap is a bottle trap that prevents sewer gases from entering the room.
The WF1 Wasteflow is a 1.5 inch BSP threaded waste outlet, which means it can be connected to standard pipework using a compression fitting or similar. The outlet is designed to fit into a 90mm diameter hole in the sink, and comes with a rubber sealing washer to ensure a watertight seal.
The FJ10 Trap is a bottle trap that fits between the waste outlet and the pipework. It is designed to prevent sewer gases from entering the room by creating a water seal. The trap has a 75mm water seal and is suitable for use with a range of sink styles and sizes.
Overall, the McAlpine WF1 Wasteflow with FJ10 Trap is a reliable and easy-to-install solution for ensuring a clean and odour-free kitchen environment.
・ 50mm Water Seal
・ 90-114mm plain end outlet
・ Suits WC squatting pans, slop hoppers or similar appliances
・ Will connect to 110mm pipe
・ Manufactured in high density polyethylene
The McAlpine USG2-R125SS is a plumbing fixture that is designed to be used as a floor gully in wet room areas or shower areas. It features an untrapped gully with a 2" vertical outlet, making it suitable for use with standard 2" pipework.
The gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
One of the key features of the McAlpine USG2-R125SS is that it is untrapped, meaning that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The 2" vertical outlet on the gully is designed to be compatible with standard plumbing fittings and pipework, allowing for easy installation and connection to the existing drainage system.
The McAlpine USG2-R125SS is suitable for use with tiled or concrete floors and can be used in both residential and commercial settings. It is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
Overall, the McAlpine Untrapped Gully With 2" Vertical Outlet USG2-R125SS is a high-quality plumbing fixture that is designed to provide efficient and reliable drainage for wet room areas or shower areas.
The McAlpine USG1T6WH is a plumbing fixture designed to be used as a floor gully for draining wastewater from shower areas, wet rooms, or other similar spaces. It is made of high-quality, durable materials that are resistant to corrosion and chemical damage.
The gully features a 22mm horizontal plain outlet, which allows for easy and efficient drainage of wastewater. The outlet is designed to be compatible with standard plumbing fittings and pipework.
One of the key features of the McAlpine USG1T6WH is that it is untrapped. This means that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The McAlpine USG1T6WH is designed to be installed into a pre-formed floor, and it comes with a removable grate for easy access to the waste trap below. It is suitable for use with tiled or concrete floors, and it can be used in both residential and commercial settings.
Overall, the McAlpine Untrapped Gully with 22mm Horizontal Plain Outlet USG1T6WH is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
The McAlpine TUN-3CP is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet, finished in chrome.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3CP with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3CP is finished in chrome, giving it a modern and stylish appearance. It is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3CP provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited. The chrome finish also adds a stylish touch to any kitchen or utility room.
・ Available in White or Chrome Plated Plastic
Introducing the McAlpine Indian Ivory Handle Sink or Bath Plug Card-10, a stylish and practical solution for your sink or bath plug needs. This pack includes a sink or bath plug, featuring an elegant Indian ivory handle for easy removal and insertion.
Crafted from high-quality materials, these sink or bath plugs are designed to withstand exposure to moisture and chemicals, ensuring their longevity and reliability in your plumbing system. The Indian ivory handles add a touch of sophistication and elegance to your bathroom or kitchen sink, elevating the look and feel of your space.
Installation of the McAlpine Indian Ivory Handle Sink or Bath Plug Card-10 is straightforward and can be done quickly and easily. Simply insert the plug into the sink or bath drain and use the handle to remove or insert the plug as needed.
This single pack of sink / bath plug is an ideal choice for anyone looking to replace or upgrade their current plugs.
In summary, the McAlpine Indian Ivory Handle Sink or Bath Plug Card-10 is a stylish, practical, and reliable solution for your sink or bath plug needs. Its high-quality construction, easy installation, and elegant design make it an excellent choice for homeowners, DIY enthusiasts, and professional plumbers alike. Upgrade your sink or bath plugs today with the McAlpine Indian Ivory Handle Sink or Bath Plug Card-10.
・ Mounted on Card with Hanging Slot
・ Indian Ivory Handle Sink or Bath Plug
・ For use with 1½" waste outlet fittings
・ Manufactured in ivory plastic
・ Supplied With Handle and rubber seal
Chrome finished service valve allows isolation of a fixture or appliance for emergency or maintenance work
JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit service valve with integrated isolation handle
Durable brass chrome plated body
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The McAlpine Fyne Bath filler is a contemporary tap range featuring a stylish lever design ideal for a modern household. It has an exceptionally easy functionality and has a great design to suit any bathroom.
• Complete with Tap Tails
• Chrome 3+
• 15 Year Product Guarantee
• Top Mount Installation
• WRAS Approved
• Acid salt spray tested to 48hr
• Minimum Flow Rate: 0.2
• Maximum Flow Rate: 5
• Spout Height (mm): 61
• Spout Length (mm): 110
The McAlpine BSW10 1½" Backnut Bath Waste is a type of waste fitting for a bathtub that includes a 70mm stainless steel flange and a 1½" tail. The tail is unslotted, meaning that it does not include any holes or perforations for water drainage.
The waste also includes a plug, which can be used to stop the flow of water from the bathtub. The plug can be removed when the bathtub needs to be emptied.
Overall, the McAlpine BSW10 1½" Backnut Bath Waste is a durable and reliable option for any bathtub that requires a waste fitting with a 1½" tail and a 70mm flange.
・ 1½" BSP
・ Black PVC plug
・ White Plastic Backnut
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
・ 1½" Tail
The Hep20 KL PB Socket Reducer is designed for efficient plumbing solutions. This reducer allows for seamless transitions between pipe sizes, ensuring a secure fit and reliable performance.
High-Quality Construction: Made from durable materials for long-lasting use.
Easy Installation: Designed for quick and straightforward fitting.
Versatile Use: Suitable for various plumbing applications.
Compact Design: Space-saving reducer for tight installations.
Reliable Performance: Ensures a secure connection between pipes.
