These Scan over-shoes are made from non-woven Chlorinated Polyethylene (CPE). They are ideal for protecting floors and carpets from dirt, and to maintain hygiene. The CPE, deeply embossed sole increases the overshoes' durability, and their elasticated edges keep them held firmly on the shoe. One size fits all SCAWWDISSHOE are supplied as a pack quantity of 20 pairs.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE123500 Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 500ml.
The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.Size 2 metre .
Faithfull Natural Bassine Broom Heads provide an all-round good sweeping performance. They are designed for dry use. These heads will fit the following handles: FAIRH48118 1.22m (48in), FAIRH54118 1.37m (54in), FAIRH60118 1.52m (60in), FAIRH72118 1.83m (72in) Socket: 28mm (1.1/8in)1 x Faithfull Natural Bassine Platform Broom Head 450mm (18in)
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 1A. Adjustment: 22 - 30mm.
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 20mm Bag Weight 500g
3 Piece Faithfull Adjustable Spanner Set. All three of these spanners have a drop forged construction and a moulded soft-grip handle to combine strength with comfortable use. Sizes: 150mm, 200mm and 250mm.
Scan Brass Padlocks provide an excellent level of security. Each lock features a brass cylinder mechanism that is accurately machined making it durable and rust resistant. They have stainless shackle springs and a steel shackle with a self-locking action. All brass padlocks above 30mm in body size have hardened anti-cut and saw resistant shackle with double locking tongues for improved security. Each padlock is supplied with 3 keys. This Scan Brass Padlock has the following specification: Padlock Width: 50mm.Shackle Height: 27.4mm.Shackle Diameter: 8.0mm.Shackle Width: 26mm.Security Rating: 7.
Rapid VR22 hog rings are made from galvanised steel and are designed for use with the Rapid FP20 and FP222 Fence Pliers. Please check your fence pliers for compatible sizes. The hog rings are designed for Ø5-11mm netting wire and ideal for fixing fences onto tensioned wires.The Rapid RPDVR22GR215 VR22 Fence Hog Rings (Pack 215) come in green coated steel.
Rapid VR38 Garden Hog Rings for use with the Rapid GP238 Plant Fixer. Ideal for Ø 6, 11, and 16mm stalks and stems. Closing diameter is 4 to 14mm. Supplied in a pack of 300.
The Faithfull FAISUCPAD2 double pad suction lifter is ideal for carrying heavy, awkward items such as glass, doors, windows and sheet metal. It is made from ABS with 120mm rubber gripping pads for maximum hold. This suction lifter securely grips on glass and similar non-porous surfaces. The vacuum system will support loads of up to 45kg (99lbs) when used in a vertical orientation and up to 30kgs (66lbs) when used in a horizontal orientation. Care should always be taken when calculating the total load to be lifted. The Faithfull FAISUCPAD2 double pad suction lifter has a 5 year guarantee.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0216 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 52mm (2.1/16in).
These Union 2294 2 lever mortice bathroom sashlocks are suitable for timber doors hinged on the left or right (up to a thickness of 54mm) and requiring turn and emergency release functions. They can be deadbolt locked or unlocked by separate turn (not supplied) from inside and also deadbolt unlocked by separate emergency release from outside (not supplied). The 11mm reversible latchbolt bolt is withdrawn by lever handle from either side and the two way action is suitable for lightweight knobs or sprung handles. Please note these locks are not suitable for unsprung lever handles. Case Steel, black powder coatFollower 8mm square, 5mm turn followerNot suitable for bolt through fixing A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Chrome Finish (Striking Plate Security box type, finished to match forend) Case Size: 63mm x 102mm (2.5in) Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Boxed
PlastiKote Leaf Spray is a decorative, quick-drying acrylic lacquer that creates a gold leaf or silver leaf effect. It has a noble metal appearance with high gloss finish that is resistant to abrasions. Making it especially suitable for outdoors. For use on metal, glass, ceramics, stone, wood, paper, carton and many other surfaces. Optimal gloss will be achieved on a white base coat. Possible applications: picture/mirror frames, furniture, borders/ornamental battens, signs, Christmas and other decorations, etc. We recommend to prime with PlastiKote Twist & Spray white primer. The product can also be used underneath PlastiKote Chalk Sprays to create a classic looking piece of furniture.1 x PlastiKote Leaf Spray Gold 400ml
Sets of interlocking brass stencils.The interlocking facility ensures uniformity and neatness when marking out dates etc.Useful for making signs or marking cartons and packing cases.1 x Set of Brass Interlocking Stencils - Letters 1in
The PlastiKote Stone Touch Spray Paint is a textured spray that's as appealing to look at as it is to touch. Provides an easy way to create multi-coloured textured stone effect finishes with just one can. Simply prepare the surface and spray - it's that easy. To enhance and preserve your stone surface, simply apply PlastiKote Stone Touch Clear Sealer. For maximum coverage and a different effect, use Satin Super under a thin coat of Stone. Suitable for: ceramic, china, glass, metal, papier mache, stone, terracotta, wicker and wood. Drying time: touch dry in 2 hours, thoroughly dry in 4-6 hours. Coverage: approximately 2.23m² per tin.PKT9445 Stone Touch has the following specifications:Colour: Gotham Grey. Pack size: 400ml.
Box of 25 MasonMate Galvanised Through Bolts M10 x 125mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M10 x 125mm (25)
The Weller Electronic Lead-Free Solder is ideal for soldering semi-professional soldering tasks. Sn97Cu3/DIN EN ISO 9453. Standard 2.2%. Specifications: Diameter: 2.0mm.Size: 70g Spool.
Scan Seamless Inspection Gloves are ideal for use where extra dexterity is needed. They have a seamless polyester liner for user comfort, with nitrile coated palm and fingers for improved resistance to oil, fuels and some organic solvents. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 4Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 112 x Pairs of Scan Seamless Inspection Gloves Medium (Size 8)
Liberon Wood Floor Reviver protects and extends the life of varnished and pre-varnished interior floors. It revives and conditions varnished wooden and parquet floors to shield them from everyday wear and tear. Helps to mask scuffs and scratches while producing a tough, durable and non-slip finish. Fast drying time of only 30 minutes. Produces an attractive satin to gloss-finish onto the varnished surface in a simple one-step application. Specification: Coverage: 50-70m² per litre.Location: Interior.Dry Time: 30 minutes min.Application: Cloth or Mop.Tool Cleaning: Water.
The Plasplug Standard Plasterboard Fixings are easy to use and have been designed for general use in plasterboard. Ideal for curtain tie-backs, lightweight wall hooks and smoke alarms. Specification Drill Size: 7mm.Screw Size: No.8 (4.5mm).Supplied in a pack of 25.
Faithfull Countryman One Handed Shears feature a 360 degree swivel head that allows 7 different cutting positions. They are ideal for trimming lawn edges and cutting grass and undergrowth in tight places where a mower can't reach. The shears feature a comfortable soft-grip handle with a thumb lock to keep the blades safely closed when not in use and corrosion resistant stainless steel blades. Blade length: 125mmOverall length: 350mm
METALMATE® High Tensile Set Screws are strong and won't easily break under pressure. These quality-assured threaded fasteners are suitable for use in engineering, production, construction, repair and maintenance. Zinc plated for a longer-lasting finish. 3.1 Certification available.Standard: DIN 933. Quality assurance is extremely important to the METALMATE® brand. The entire purchasing and logistics process complies with international standards. All METALMATE® products are sourced from accredited manufacturers to ensure that only the highest quality threaded fasteners are supplied. Our supply chain partners are subject to regular audits to ensure compliance, overall service quality and timely order fulfilment. We also insist on routine assessments so the ownership of the factory does not threaten the integrity of METALMATE®. These strict quality procedures help us to be more efficient, improve product standards and deliver excellent customer service.
These METALMATE® High Tensile Set Screws have the following specification:Size: M12 x 80mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 25
The Bahco C1997LM/9P Metric Long Ball End Coloured Hex L-Key Set, 9 piece, is ideal for driving bolts and screws which have hexagonal sockets. Long arms ensure excellent leverage, which makes driving easier. The ball ends of the keys allow them to be used up to an angle of 30 degree to the socket, whilst the hexagonal ends ensure an excellent fit into the screw/bolt head.Made of high quality steel, entirely hardened, with a phosphate finish, which provides protection against corrosion, providing a long lasting life. Each size is fitted with a different coloured injection moulding grip. Its soft-touch feeling is pleasant to hold, with non-slip grip and oil resistant. These different coloured grips also enable quicker identification of required size.Supplied in a compact sleeve-case for instant selection of the required size. It allows easy storage, whilst keeping the keys together. Specifications: Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm.Piece: 9.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish 150mm Bag of 500g
These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage. APPLICATION:All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Cavity Wall Anchor ZP M4 x 32 Bag 10
Natural Bassine provides an all round good sweeping performance and is designed for dry use. The Faithfull FAIBRBASS12 Bassine broom head has the following specifications:Width: 300mm (12 inch).Socket: 23mm. Broom head only.
This Faithfull bench hook is manufactured from solid beech with screwed end hook blocks for extra strength. It will support timber safely on the work bench while sawing across the grain, helping to make sawing more accurate and safe. The bench hook has a reversible design that permits both left and right handed working. Size: 250 x 130mm (10 x 5in).
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M6 x 150 Bag 10
The PlastiKote Super Matt Spray is an excellent multipurpose spray paint. It comes in a range of finishes to suit many applications. The paint is tough, hard wearing and resistant to scratches. Super Spray Paint is very UV absorbent, water resistant, and will not fade or yellow. It protects against rust and is fast-drying. The paint is suitable for any decorative project inside or outside of the home, and is available in many colours. Suitable for: aluminium, fibreglass, glass, iron, masonry, metal, paper, paper mache, plastic, steel, stone, terracotta, wicker and wood. Not for use on high impact styrene, leather, Styrofoam and vinyl. Drying time: Touch dry within 30-50 minutes. Recoat within 1 hour. Coverage: approximately 2.23m² per pack.PKT3100SE Super Matt has the following specifications: Finish: Matt. Colour: White. Pack Size: 400ml.
tack rags Expert BLUSYN are made from polyester and viscose 3D apertured non-woven cloth, with a unique tacky formulation. Recommended for dust particles from P800 and smaller. The unique tacky formulation removes twice as much dust as with a traditional tack rag. Specification: Size: 220 x 500mmPack Quantity: 10
The Henry Squire Combination Key Safe has a durable construction and weather resistant cover to keep spare keys safe and secure. It has a 4 wheel recodable combination lock and is easy to fit. The key safe is suitable for external and internal use and ideal for offices, holiday lets and the home for easy access.