Zip Unvented Water Heater Acessories - Zip Unvented Water Heater Accessories Will the pipework accommodate expanded water without hot water entering any supply pipe connected to a cold water draw-off?If expansion in the cold water main is restricted, e.g. by a valve or meter, an expansion vessel and other relevant accessories MUST be fitted. The Zip Unvented Acessories are specially designed for those situations.
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Blank Plate
_Single Blank Plate
_Used to cover unused wall boxes
_Curved edge faceplate
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_light switch
The Varilight Ultraflat collection offers minimalism with style. The plate is just 1mm thick and wall boxes should be recessed into the wall to achieve a flush finish. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 89mm x 89mm. Double plate size: 89mm x 149mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. Fused Spur: Require a 35mm deep wall box. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A. Flex Outlet: Require a 25mm deep wall box. 16A Flex Outlet Plate. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_2-Way Rocker Switch
_2-Gang 10A 1- or 2-Way Rocker Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Contemporary, ultra-slim faceplate
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass - Brushed Steel
_Insert colours options: - Black - Brass - Chrome - Iridium - Steel - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Varilight Datagrid plates allow you to create a multitude of data points that include CAT5E, HDMI, RJ45 and coaxial sockets to name just a few. Available in the popular screw less flat plate finish you can choose between a variety of grid plate sizes from 1 to 4 gang and large selection of finishes.
_Available in 1, 2 and 4 gang data plates.
_DataGrid inserts must be ordered separately.
_Multiple finishes available.
_Manufacturer: Varilight
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_Cooker Switch
_45A Cooker Switch (Single Plate, Red Rocker)
_Double pole switching
_Single sized plate
_Sleek, low-profile screwless faceplate
Varilight Dimension Screw less flat plate power sockets form part of a contemporary range of switches and sockets that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight switched screw less flat plate power socket 13 Amp, 1 or 2 gang
_Finishes: Many to choose from
_Double pole
_Rated at 13 Amp
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_Cooker Switch
_45A Cooker Switch (Single Plate, Red Rocker)
_Double pole switching
_Single sized plate
_Sleek, low-profile screwless faceplate
Varilight Dimension Screw less flat plate switched fused spurs are available in a choice of finishes and insert colours. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight 13 Amp screw less flat plate switched fused spur
_Finishes: Brushed Steel, Brushed Brass, Polished Brass, Polished Chrome, Mocha, Iridium Black
_Manufacturer: Varilight
DataGrid Twin Plate (4 Grid Spaces)
_Available in 1, 2 and 4 gang data plates.
_DataGrid inserts must be ordered separately.
_Multiple finishes available.
_Manufacturer: Varilight
VARILIGHT switches are designed to meet the latest European Safety Legislation. Flat plate design allowing the products to sit flush to the wall; with ultra-slim front plates this decorative range gives a stunning finish. Our standard switches are suitable for controlling both mains and low voltage lighting. They are also suitable for 1-way or 2-way circuits (where the same lights are controlled by two switches) and rated at 10 amps. If the lights are controlled by three switches then one of the switches in the circuit must be an intermediate switch with four terminals enabling you to link all three switches together.
_2 Gang - 2 Way 10A Light Switch
_Ultra Flat Plate - Polished Brass Finished Plate
_Decorative Inserts
_Flat Plate
_Stylish Modern Design Quick and Simple Installation
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_13A Socket
_1-Gang 13A Double Pole Switched Socket with Metal Rockers
_Double pole switching for safer operation
_Sleek, low-profile screwless faceplate
Varilight classic 13 amps double pole switched socket and metal rocker switches with bevelled edge faceplate. Switched socket is available in a plate finish and insert colour with gang options.
_Choose stylish plate finish options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Two Insert colors options: - Black - White
_Available in 1 or 2 gang options
_Range: Classic
Varilight 1-Gang 20 amps double pole rocker switch with neon indicator light. Rocker switches is available with insert colour options.
_Three insert colours options: - Black - White
_Finish: Mirror Chrome
_1-Gang
_Double Pole
Varilight classic 4 gang 10 amps twin plate 1 or 2 way toggle switches with roped edge faceplate. Suitable for controlling both mains and low voltage lighting. Toggle switches is available in a two finish options.
_Available in finish options: Antique brass or Georgian brass
_4 Gang
_Insert colour: Brass
_Range: Classic
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Push Switch
_1-Gang 6A 1- or 2-Way Push-On/Off Impulse Switch
_1- or 2-way push on/off switching
_Coordinates with V-Pro IR and V-Plus IR dimmers
_Suitable for controlling both mains and low voltage lighting
Varilight Dimension Screw less flat plate shaver socket has 230V and 115V inputs and is available in a choice of finishes and insert colours. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight Dimension Screw less Flat Plate Dual Voltage Shaver Socket
_Finishes: Brushed Steel, Polished Chrome, Polished Brass, Brushed Brass, Iridium Black and Mocha.
_Manufacturer: Varilight
_Package Dimensions: 550.0 L x 550.0 H x 550.0 W (millimeters)
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge face-plate. Suitable for controlling both mains and low voltage lighting.
_Many stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Three insert colours options - Black - Polished Chrome - White
_Available in 1, 2 or 3 gang options
_Range: Classic
Varilight classic 10 amps 1 or 2 way toggle switches with roped edge faceplate. Suitable for controlling both mains and low voltage lighting. Toggle switches is available in a two finishes and gang options.
_Choose stylish finishes options: - Antique Georgian - Georgian Brass
_Available in gang options: - 1-Gang - 2 Gang - 3 Gang
_Insert colour: Brass
_Range: Classic
The Varilight Georgian range has a roped finish on the edge of the plate. Covered by the Varilight 10 year guaranty. Single plate size: 95mm x 95mm. Double plate size: 95mm x 155mm. 13A Plug sockets: Require a 25mm deep wall box. USB sockets are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Grid Pack (Plate and Yoke)
_2-Gang PowerGrid Plate including Yoke (Single Plate)
_Create your own switch combinations
_Rope edge faceplate
Discover the performance of the V-Tac Vt-121 18W T8 Nano Plastic Tube Non Rotatable 120Cm Samsung Chip 4000K. Engineered for energy efficiency and superior brightness, this LED solution is a smart choice for modern lighting needs.
Inspired by the Art Deco movement, the Mirror Chrome finish will bring a bright, clean look to any room. Varilight decorative wiring accessories are British made and covered by the Varilight lifetime guarantee.
Discover the performance of the V-Tac Vt-121 18W T8 Nano Plastic Tube-Non Rotatable(120Cm) With Samsung Chip Colorcode:6500K. Engineered for energy efficiency and superior brightness, this LED solution is a smart choice for modern lighting needs.
Combining the warmth of copper and the finesse of a brushed finish, Brushed Copper brings a feeling of luxury to any space. Black inserts complete the look. Varilight decorative wiring accessories are British made and covered by the Varilight lifetime guarantee.
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge face-plate. Suitable for controlling both mains and low voltage lighting.
_Many stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Three insert colours options - Black - Polished Chrome - White
_Available in 1, 2 or 3 gang options
_Range: Classic
Get bright, energy-saving performance with the V-Tac Lumi Vt-4006 40W/50W/60W Led Batten Fitting 6Ft Samsung Chip Cct 3In1 135Lm/W. This LED batten fitting is ideal for garages, workshops, and utility areas. Easy to install and built to last.
Range: PowerGrid Urban. Finish: Polished Copper. : Grid Pack (Plate and Yoke). : 3-Gang PowerGrid Plate including Yoke (Twin Plate). Features: Create your own switch combinations. Varilight Urban: Inspirational finishes for stylish spaces. Dimensions: 91x150x*mm. Faceplate Depth: 8mm. Product Weight (g): 230. Fixing Centres: 120.6mm. Depth from Mounting Face: Module Dependent. Operating Voltage: 220/250V AC. Maximum Load Rating: N/A. Varilight Guarantee (years): 10.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
Offering a contemporary take on a classical finish, and paired with black inserts, Brushed Bronze suits both traditional and modern spaces. Varilight decorative wiring accessories are British made and covered by the Varilight lifetime guarantee.
